DIY CNC Router Part 1 // Building a Small CNC Router

Hello friends, i'm back ;) in this video series i'll be making a small benchtop CNC router for hobby works. You will find all the measurements and material names at the end of the part 2. Merhaba arkadaşlar, uzun bir aradan sonra geri döndüm ;) İki videoluk bu seride küçük hobi işleri için bir cnc tezgahı yapıyorum. Tüm ölçüleri ve malzemelerin isimlerini 2. videonun sonunda bulabileceksiniz. Здравствуйте, друзья, я вернулся;) в этой серии видео я буду делать небольшой настольный фрезерный станок с ЧПУ для хобби. Вы найдете все размеры и названия материалов в конце части 2. Hola amigos, he vuelto;) en esta serie de videos haré un pequeño enrutador CNC de mesa para trabajos de hobby. Encontrará todas las medidas y nombres de materiales al final de la parte 2. Olá amigos, estou de volta;) nesta série de vídeos estarei fazendo um pequeno roteador CNC de bancada para trabalhos de hobby. Você encontrará todas as medidas e nomes de materiais no final da parte 2.

[@АлександрВладимирович-к2р]

Друг, не пропадай, видео класс продолжай в том же духе). 👍👌✋.

[@Dingbat217]

Good to see you back again! :-)

[@creativekampung7954]

Iyahh saya nunggu nunggu projek terbaru lama sekali tidak upload... Sipp lahh semangat terus my friend

[@aliciabarrios-]

Excelente proyecto, gracias por compartirlo.. Saludos desde Argentina 🙋🇦🇷

[@albertogonzalez01]

Usted señor es una joya en KZbin sus trabajos son épicos e increíbles. Se le extrañaba y es bueno saber que se encuentra sano y salvo. Un saludo y un abrazo virtual amigo.

[@CarlosAIbarra]

I have always been told that German craftsmanship is the best. and this just proves it right. Great work!

[@tudorversoiu8138]

He is Turkish.

[@recklessroges]

Matthias Wandel's silent cousin from another continent. Great stuff. Thank you for showing your video.

[@ZappninLLP]

I would not be surprised if you get your electricity from a DIY wind and solar generator you carved out of a single block of wood and mounted in your backyard. Amazing work! Thanks for posting this.

[@malcolmmarks7374]

Fantastic project. Looking forward to part 2. Thanks for sharing.

[@beckseven]

Man I have to comment here, to thank you you opened my mind I'm going to make my project based on yours. and I want to thank you for sharing your knowledge without half terms. Congratulations and thank you. Unlike most videos that put this as an extremely difficult and almost impossible thing to do, you showed that it is possible in a very simple way.

[@krisconroy285]

The superman of wood. Fantastic job mate. 🇬🇧

[@robertoenocbermudez83]

Excelent brother. Ingenious CNC ROUTER. As always you are truly a conjurer who works magic with the materials that pass through your hands. God bless you always. Thank you for democratizing your knowledge, that is of great importance for the artisan world. A greeting from Venezuela.

[@JPToto]

This is FANTASTIC. Would love to see the plans and materials. Looking forward to part 2!! Well done!

[@M1shaher]

We are waiting for the second part . Thank you for sharing us these experiences.

[@victordudkin2213]

Как всегда четко,поделовому и без лишних слов. ЗДОРОВО! СПАСИБО И УДАЧИ!

[@datikon7843]

Sevgili Gökmen ALTUNTAŞ, Türkçe bilmiyorum ama bu videoya yorum yazmak için google translate kullandım. Yeteneğinize ve zekanıza hayranım. Makineniz güzel ve atölye temiz ve parlak. Belli ki kontrplağı seviyorsunuz - ve ben de kontrplağı çok yönlülüğü nedeniyle seviyorum. Sizlere en derin saygı ve şükranlarımı sunar, kanalınızın gelişmesini dilerim. Konstantin, Ukrayna

[@hansdegroot8549]

Great video. Thanks for sharing. I'm already looking forward to the second part.

[@stephaneroy3071]

Bonjour, j'ai hâte de voir la suite. Bravo.

[@serdark7706]

Beğenmeyen ne amaçla beğenmemiş, hangi ruh halinde anlayamadım, anlayabilen beri gelsin, Maşallah elinize sağlık tüm videolar 4 4 lük mükemmel ve eğitici

[@yalnztek2985]

Hocam ellerine sağlık, tebrik ediyorum, sabırsızlıkla bekliyorum ikinci videoyu! Başlangıç-Hobby için değerli bir paylaşım 👏👏👏

[@Pepe-ry8pm]

Spectacular returned !!! A new "toy" for my Makita !! Thank you!!!

[@mauriliogennari7402]

P

[@Harinair72]

Aah, master... You give hope to mere mortal wood workers.. Waiting for part 2...Thank you so much!

[@zodak9999b]

Your projects are always amazing. Thanks for sharing them!

[@thewolf3530]

Hey buddy I love the way you threw your work very unique very clean and you are taking your time no rush that's why you doing good job .

[@АлексейЯкупов-р3е]

Как всегда высший уровень! Молодец! Без заморочек и все работает.

[@jamescram4674]

Nice build. Tip for the hole saw; tap in and out while drilling to clear the shavings from the teeth, that's why shes overheating and not cutting nice.

[@woodworks3585]

Glad to see you back. I was getting worried that something was wrong. This is going to be epic. One I will build when it's all done. I have always been a Fan of your work as you make it all simple to follow and include everything . like the measurements and materials etc ... Thank you for doing this video as I have been looking for something just like this.. Stay safe out there my friend. Looking forward to part 2. 👍😊😎

[@djnix2k10]

Esto es genial!! Muchas Gracias por compartir! Muy buen trabajo!!!

[@ياسرالسمحي]

Simplicity, creativity and unparalleled professionalism.. You always amaze us with your creativity. Greetings from the Yemen Arab Republic Keep advancing your creativity and wonderful imagination, we are always with you

[@АлексейКоролев-г7в]

я Русский,смотрю и то мне все понятно до мелочей!тут точно LIKE

[@atosvilmar]

melhor vídeo até hoje no KZbin. parabéns meu amigo....

[@numantemiz9571]

Gökmen bey tebrikler sonunda bunu da yaptınız. Elinize sağlık

[@franciscotorrilla6755]

It´s amazing! Best wishes from Argentina!

[@catchfish2057]

you are a true engineer. keep it up

[@raunakmuz]

Awesome man..this is the most doable most simplest yet fully functional design

[@stevenA44]

Nice, looking forward to part 2.

[@jsmythib]

BSG "Mark I, Eyeball." Very nice design, and a pleasure to see all the tool jigs being used, also created. Inspirational- good job :)

[@crazypassersby9828]

That was comforting to watch, well done.

[@ot4474]

Thanks for sharing, that's a really good job, greetings from Colombia

[@Mehmetttt1453]

Gökmen kardeşim emeğine sağlık severek takip ediyoruz seni... Rabbim emeğinin karşılığını versin inşallah 👏

[@MCsCreations]

Excellent work, dude! It's looking fantastic already! 😃 Stay safe there with your family! 🖖😊

[@arscomposições]

👋👋👋👋 esse canal era tudo o que eu precisava . 🙏🙏🙏

[@djtur1]

Çok açık ve net bir paylaşım.Ellerinize sağlık.

[@eduardo.bezerra.8570]

Seus trabalhos são incríveis. Obrigado por compartilhar.

[@aarrioladiy]

Excellent!!! great job, greetings friend.

[@goodwill7643]

make place fro two or three spindles. So in some projects you don't need to change milling bits. For example milling and drilling can be done in one project setup without stopping process. Great job, I'd like to have one like this. :)

[@luiseveliofreireaguirre4258]

¡ un video espectacular ! Los felicito

[@hassanal-mosawi6049]

Thanks for sharing that, well done!

[@boracadoglu9330]

Gökmen nerde boş iş var onlarda bir numarasın tebrik ederim sen birtanesin

[@rontidd6551]

Awesome. My only question is if the glue only connection between the motor mount and z axis slide alone will handle the vibration and stress over time. Can't wait for the next video...

[@carlosomarcaffa232]

ESPECTACULAR UNO DE LOS MEJORES CANALES DE BRICOLAJE Y NUMBER ONE EN DIY

[@albertosalamancafuentes7126]

Amigo muchas gracias por sus enseñanzas que mi señor Jesucristo derrame muchas bendiciones en usted por tomarse su tiempo para enseñarnos muchas gracias un abrazo

[@sergioespinosa6377]

ssiiii excelente, esto es lo que ha buscado hace meses,.. espero el segundo video para ver la lista de materiales... como siempre muy bueno trabajos...

[@fernandolex4581]

Muito útil seus videos Brazil!

[@xavierpina9756]

acabo de encontrar su canal y es estraordinario, seguire su hilo, i realizare muchos de sus trabajos, muchas gracias por compartir sus conocimientos

[@bastelbaer_eu]

Very good work! I will build also this cnc router!

[@lyteyearz5810]

Really enjoyed watching this!

[@MoodlePig]

Yes

[@luizroberiosoaresdossantos2090]

Valeu a pena esperar estes meses todos, mais um excelente projeto, obrigado.

[@Jaloja]

Germans do have a gift. I just wonder why they didn't use that gift on VW's...

[@eduardotabasco]

Muito bom, pena que aqui no Brasil as peças de CNC router sao muito caras, ontem mesmo vi os valores de guias lineares e são mais caras que os olhos da cara. Good job. Thanks for Share

[@homopensante112]

Gracias por tus videos. Chile, sudamerica

[@mrohny76]

świetne ładnie zrobione 👍👍

[@nathanbrown4725]

Well done mate..thanks for sharing

[@bricoartfgs4486]

Hola... Felicidades||| Excelente trabajo muy bien ejecutado y un magnífico resultado... Un vídeo Genial, Muchas gracias por compartir éste proyecto, me ha encantado. Gracias... Saludos.

[@yalcin1234]

İzlemek bile zevkli teşekkürler ellerinize sağlık 👏👏👏

[@darkwinter6028]

Hmm... well, wood frame CNCs aren’t ideal for a variety of reasons; but if that’s what you’ve got, then that’s what you’ve got. I would strongly suggest giving it a oil or solvent based waterproof coating to help keep the swelling and warping from humidity changes down to a minimum. And for anybody else looking to build one; if you must use wood, at least use high quality plywood (like fine furniture grade Baltic birch); and avoid the stuff they use for floors and walls in buildings. Also, when you’re ordering the linear rails, ballscrews, motors, etc; be sure to pick up a dial indicator or two; it makes getting everything aligned much easier. 🤔

[@msmlgh]

nice , We are waiting for the second part

[@cihantuysuz7181]

ustam yapığın cnc çok güzel oldu eline sağlık tebrik ederim yalnız ahşap malzemelerinde yapım öçülerini de verseydin daha da güzel olurdu çünkü bende bunun 150x100 çalışma alnı olanını yapacağımda onun için ahşap ölçüleri de gerekli

[@lisuk66]

✌️Чувак, где ты пропадал? Отличная работа👍!!!

[@Dumah79]

Gökmen usta nerelerdesin? Videolara hasret kaldık.

[@paulocesarrodrigues1944]

amazing work...congratulations. I would like to know what is the cutting area of ​​this project and if it is possible to make a bigger one with the same controller board.

[@polokonketlane140]

😊😊😊wow engineering have no limitations

[@RI-ns8wz]

Is the 2nd part available? It is awesome! The best explained tutorial I have seen.

[@martinwolf5957]

Great awesome work 👍 👍 👍 👍

[@sergeyshtefan4477]

😊❤Super! Cool 👍👍👍! Amazing😍😍! Beautiful✨✨!

[@maddog999ify]

Hi just a quick question, can you supply paper plans to make this , going to have a go at making it.👍

[@gotzolones]

Aparte de bien hecho y fino Bonito trabajo.,

[@brunobezon236]

You will have some problems to squarre the 3 axes... I am waiting the following episodes. Good luck, thanks for your contributions.

[@joerideman]

Hey I enjoyed your table saw build. Just a question. Are those 7 commercial breaks on purpose or is this KZbins automatic advertisement policy?

[@juancarlosgonzaleztrinidad3624]

Excelente, brillante idea, 👏👏👏👏👏👏👏🇲🇽✴

[@serkandemirhanofficial]

Ahanda beklediğim video :)

[@johnmichaels4330]

This was great, thank you for putting the part names in the video. This inspired me to do some other things. Subed. Can't wait to look through your other stuff.

[@codingprinting3dandcnc191]

Work like a charm, so crazy and amazing job.

[@GPDIY]

That's a quality build!

[@Cagri.Singor]

Artık bir sonraki sefere tahtadan zaman makinası yapmanı bekliyoruz :))

Ar-ge çalışmalarına başladım siz gitmek istediğiniz zaman dilimine karar verin :)

[@The-Master-of-None]

Nice build! How much is the total cost you spend to build one?

[@fernandoquantico1]

Very nice !!! When are going to release part 2 ? Can't wait to see !!!

it's released :) kzbin.info/www/bejne/ioWomaqweMeKg6M

[@MrTanjumercan]

Eline sağlık hocam çok güzel işler yapıyorsunuz

[@mortimerschnerd3846]

Absolutely beautiful work!!! PS you need to get some new (sharp) hole saws!

[@danielcamargo5373]

Excelente trabajo! 👍🤝

[@utcreels]

you are great bro please make 3d printer because you explain everything in your videos

[@asumanmakas8294]

Yine harikasın ellerine sağlık ustam

[@tudopelosocial1370]

Obrigado, tudo muito bem explicado não preciso nem de tradutor para entender, esperando a parte2

[@brookelaughter4960]

what software do you use with this router? can you use Easel software?

[@perikliskarolidis5169]

Nice work!

[@suleymanpyl6048]

Selamun aleykum gökmen bey çok güzel bilgili videolar emeğinize sağlık bir sorum olacak yaptığınız cnc uygulamasında cnc çalışma mesefasi aralığını dezgahi büyüterek mi yapılabilir yoksa hem dezgahin büyütülmesi hemde kulanilan cns kartının farklı mi olması gerekir tesekkurler

[@maddog999ify]

Hi , just watched you building a CNC , machine, just a quick question, do you supply plans to make one , kind regards Jon.

[@moinshaikh6684]

As someone with two years of experience, I highly recommend avoiding GRBL-based control boards. They often encounter random stopping issues, which can be incredibly frustrating and time-consuming, especially during CNC operations. Despite upgrading my stepper driver to the BT6600 and trying multiple solutions-such as upgrading the firmware, replacing the control board, and using different CNC software, changing usb cable, changing firmware, changing speed, changing power supply, supply voltage, usb settings, by running on different speed, Applying ground to machine body, changing usb cable, changing different current and precision settings from stepper driver, the problem persists. Unfortunately, this is a problem rarely discussed on online platforms, KZbinrs mostly show good part of there's project only rather than ground reality,such a worst random stop problem can completely disrupt a job when the machine unexpectedly stops during cutting. Of someone have solution for this, please don't hesitate to reply back!

[@amestroneelectronicspvtltd1491]

hi, i was thinking to continue with grbl can you please elaborate what type of problems occurs in this software.

[@mesuteroltr]

bence işciliğinz çok iyi. bide daha önce yaptığınız aletleri kullanmanızda güzel birşey.

[@chasejob2037]

Do you have any plans available that I could use to make this?

[@АнтониоПетров-я7щ]

Круто братан!!! Золотые руки!!! Респект и уважение и лайк за труд!!!😎😉🙂☺😀😄💪👌👏🖒👍🙄🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

[@gerardadam7093]

bonsoir ou peut on trouver les plans de vos création

[@farhadfadayi7389]

it is great video. thanks for sharing. love to try it one

[@johndoo1265]

Ellerin dert görmesin usta 👌👏👏👏

[@John8g]

If you outline the hole you want to drill with your hole saw and then drill a smaller hole inside the diameter of the hole you are drilling with the edge of the smaller hole overlapping the bigger hole, you will get less burning and extend the life of your hole saws. Just a suggestion.

This is a good idea, thanks.