DIY Coffee Roaster

[@somekindofool]

holy moly that was the real budget coffee roaster i'm looking for, thanks for the idea!❤🎉

[@jankuyper8353]

I never had a look out for bad beans before roasting....thanks for that tip

[@anggapradita2746]

you are inspiring me a lot , for save the budget 😊😇

[@weeliano]

Very good! I love these types of home DIY coffee roasting solutions! Good final result!

[@Isaacskilling]

Great stuff!! I was going to spend $2000 on one, but why would I bother after seeing yours home made!

[@oamarolucas]

Wonderful project my friend!! I'm willing to do one like this to roast some beans for my espresso machine. Thanks for all ideas :)

[@supli304]

Thank you for your comment!!!

[@GertimAlberda]

Brilliant! Well done!

[@Johnnybananass-_]

Youve inspired to make the same unit .

[@DirkSchoemakers]

Very nice DIY project. What I do not like very much is the energy inefficiency. I would alter two things: a) Switch to electric heating / e.g. from an old toaster b) Build a housing for the cage and the heating. You gain two major improvements. a) With a sensor you can control your roasting temperature more precisely b) You waste less energy and can optionally power the applicance with solar energy instead of fossil gas. c) You can use the same ventilator for heating and cooling d) You can build a drawer at the bottom to collect the clutter

[@supli304]

Thank you for your suggestions! I would like to make such a modified one if there is a chance.

[@tonymengela3575]

flame roasted coffee from my own experience produces a much more tasty cup of coffee. I see what you are saying but these when dailed in after use and learning curves are just fine and saying electric is more efficient is a stretch

[@tubetriode1]

exactly what I am looking for.

[@overthetopblues]

Please can you tell us where you got the handle? Thank you. It’s a lovely design.

[@hadar6091]

Hi, nice video , do you now the brand of coffee canister ?

[@에픽하이-w6y]

Such a good idea. I am wondering how can you install power. thank you.

[@supli304]

Please see thingiverse for the detail. Thank you!

[@registraciones7861]

Good job. 👍 I'm also interested in the power supply you used, Thingaverse does not mention a power supply. Thank you

[@СергейСеров-н4р]

Удобнее всего взять старую стиральную машину кинуть туда 5 кг зеленого зерна, разжечь под барабаном костер и включить режим отжим трусов, кофе получается равномерно обжаренным и очень вкусным. Чашка, джезва, кофеварка, капельный принцип - идеально!

[@Serrajimed]

Good evening, I really liked your manufactured gadgets. Remarkable work. Cheer. But what I love is the coffee roaster. And I had the idea to make one like yours. So the question of where you bought the grid container and the orange plastic parts where the bearings are housed. Thank you.

[@supli304]

Thank you for your comment and question! The answers were written in www.thingiverse.com/thing:5213256 Please read it. Thank you!

[@Serrajimed]

@@supli304 Thank you so much.

[@anthonilamond7356]

Nice roaster! What engine are you using?

[@inquisitivecoffee]

Nice! I had the same idea! I just need to research how to properly wire the motor. What size shaft does your motor have? 8mm?

[@supli304]

Thank you for your comment! It is 6mm shaft.

[@inquisitivecoffee]

@@supli304 Gotcha, Thanks! I'll start looking for a motor

[@supli304]

There is an information about the motor in www.thingiverse.com/thing:5213256. I hope this will help you.

[@inquisitivecoffee]

@@supli304 oh that's awesome! I didn't see this part before. I'll check it out, thanks so much!

[@inquisitivecoffee]

@@supli304 so I've printed the parts and ordered the motor and PWM switch. What did you do for the power supply? Just a 12v DC charger with pig tails going to try pwm?

[@shanov7]

Молодец👍🤗!

[@司麻-d7e]

Se ve delicioso😋

[@crazyglue33]

👍👍

[@Coffeefamily84]

Mr., may I know the tool for the orange bearing holder, I'm still making manual roasting, and that tool is hard for me to find. Thank you

[@supli304]

It is a 3D printed holder. You can find it in my thingiverse page.

[@Coffeefamily84]

@@supli304 ok,,thanks Dengan motor dc nya,apa benar 200rpm?

[@supli304]

Yes, it is. The speed is reduced by PWM control. 100rpm might be OK, too.

[@Coffeefamily84]

@@supli304 ok ok👍

[@whoami724y]

Hello! I am planning to build one with the same type of roaster basket as yours, may i ask what is the size of the basket? Is it 14x18cm?

[@supli304]

Thank you for asking. The size is 12x18cm.

[@whoami724y]

@@supli304 thank you so much! And it holds 250 grams too, i guess i don't need to buy the bigger variant

[@supli304]

@@whoami724y Now, I am putting 333g,and there is no problem.

[@marthaluciadiazvanegas937]

Esta para la venta este tipo de tostador?

[@supli304]

You can find similar Coffee Roaster Machine such as www.ebay.com/p/14004879631?iid=274775503825&rt=nc These are quite expensive.

[@mhpjii]

Good job! I highly recommend that you switch to a french press or other immersion brewer as the paper filters today are so overly engineered that they trap much of the flavonoids in those beautiful coffee beans you just roasted. Enjoy!

[@noahmn4985]

Paper filter creats cleaner cup but i enjoy french press fuller body too