DIY Display Case Cover without glue. Quick Tips by ModelFun

[@stephenschroeder6567]

Absolutely Outstanding timing! I am looking at a few commercial companies to make just such a case and the cost is considerable. Your cases are excellent!!! I was unaware of this type of tape and upon researching through "you know where," I found all sorts of options/choices. There are lots of wide tapes, but some sellers have highly rated clear ones ranging from 2mm to 20mm in width. This should work perfectly as I can obtain the acrylic sheets locally for reasonable prices. I just never considered the process because of the glue aspect. This tape solves that problem and your technique is easy enough to replicate. Thank you for sharing your process and knowledge and thanks to the KZbin algorithm for placing your video in my list! I wish you a long and happy life!!!

[@modelfun]

Fantastic, I'm glad this method helps you. Thank you for watching and leaving a comment 😀

[@kurtyoung5391]

🎉 greetings from Trinidad and Tobago. Great tutorial.

[@modelfun]

Thank you for watching. Greetings!!

[@DutchDaveModels]

This is one of the best simple tutorials I’ve seen in years on display case making! Subbed 💥👍💥

[@modelfun]

Great to see that. Thank you for your comment! :)

[@flightis3dollars]

Good solution. Thanks for sharing.

[@modelfun]

Glad to help🙂

[@marb1900]

Many thanks, it helps me a lot! 💯👌👍

[@modelfun]

Thank you for watching. I'm glad you find it helpfull.

[@michaelsmith6246]

Great idea. Thanks for your video 👍👍

[@modelfun]

I'm glad you like it. Thank you for watching and your comment. :)

[@willdyer3371]

Love it great video.

[@modelfun]

Thank you! :)

[@BobHarris-o8p]

Excellent! Thank You for You. Works great. What an economic, innovated way. Sure cuts price of display.

[@modelfun]

@@BobHarris-o8p Thank you. I'm glad you lke it.

[@robbo1068]

What an easy and effective way to build a display case....and without glue! Thanks for sharing this idea, very useful tip. BTW...where do you source the tape?

[@modelfun]

The tape I use you can see here. Although, I don't think this store ship outside of PL: www.budfix.pl/tasma-dwustronna-mocna-3mm-50m-klejaca-dwustronna-montazowa-foliowa-dwustronnie-klejaca-przezroczysta-pet An international one I found: www.sanlitape.com/details/8/2.html?gad_source=1&gclid=CjwKCAiA9vS6BhA9EiwAJpnXw8Smf0Xj3cPrA1Ga1MzsXED81xA1yA5iTJjm7hKnoVCPs2uU5o2wgRoCs3AQAvD_BwE Or Google: Red double sided PET tape.

[@olivieraubault1994]

Very interesting méthod. Thanks!

[@modelfun]

I'm glad you like it. Thank you for watching and your comment.

Great tip. Thanks for sharing 🙂👍

[@modelfun]

I'm glad you like it. Thank you for watching and your comment.

[@owenauer3406]

Can you post a link to where I can get the tape please.

[@modelfun]

Sure, the tape I use you can see here. Although, I don't think this store ship outside of PL: www.budfix.pl/tasma-dwustronna-mocna-3mm-50m-klejaca-dwustronna-montazowa-foliowa-dwustronnie-klejaca-przezroczysta-pet An international one I found: www.sanlitape.com/details/8/2.html?gad_source=1&gclid=CjwKCAiA9vS6BhA9EiwAJpnXw8Smf0Xj3cPrA1Ga1MzsXED81xA1yA5iTJjm7hKnoVCPs2uU5o2wgRoCs3AQAvD_BwE Or Google: Red double sided PET tape.

[@lukasz_p_]

Check for TESA 4965 3mm, this Budfix seems to be cheaper clone.

[@BobHarris-o8p]

Fantastic! How would you go about finding a place to purchase the plexiglass, and most importantly, how did you get it "professionaly" cut? Thank You, this is so helpful!

[@modelfun]

Thanks Bob, I'm glad you like it. I've found the company on the internet, and order from them online. If you do not find a company in your location, I can prepare all what is needed for you. Check out my store: www.etsy.com/shop/ModelFunDisplay Thank you for watching and your comment.

[@BobHarris-o8p]

I'm believe that is how I'm going to go. I'll check it out in your Etsy. Thank You for your time and helpfulness

[@herrlogan17]

This is awesome, many thanks. You scared the shit out of me at the end though 😀

[@modelfun]

😀 Almost had a heart attack when I hit it. 🤣🤣 Thanks for watching 😀

[@thedodge1942]

cool thing, i copy that!!

[@modelfun]

Thank you. :)

[@fabrizioferrari4571]

Le lastre di plexiglas quanto costano?

[@modelfun]

@@fabrizioferrari4571 it depends on the size, but usually the whole case is 50% up to 100% cheaper than market ready display case.

[@fabrizioferrari4571]

@modelfun Grazie per la tua risposta 👍

[@modelfun]

@@fabrizioferrari4571 feel welcome to check out my prices: www.etsy.com/listing/1828309038/diy-display-case-cover-parts-for-self?ref=listings_manager_grid

[@ElderEric]

Great method! (But I have a strong aversion to Brian's voice...)