DIY Eaves Storage - Using Sliding Doors for Attic Loft Conversions

My DIY video shows you how to easily install a loft conversion or attic eaves storage solution using sliding doors. Here I use the Rohley Ares 3 kit, but this eaves storage idea also works with the Rothley Ares 2 kit as well. If you’re thinking of commissioning custom made eaves doors in your loft conversion, think twice as making cupboards in the attic using sliding doors is so much cheaper and easier so you can DIY.
The sliding doors installation was really easy and a really satisfying DIY storage project to complete. It makes use of the mostly useless space at the bottom of your attic eaves and also leaves your loft conversion looking super smart and tidy.
Check out more of my DIY projects made in the UK here: • Easy DIY Projects
Find out more about the Rothley Ares 2 and 3 kit, as well as directions on how to make a DIY TV lift cabinet on my website: www.warrennash.co.uk/diy/slid...
Remember to subscribe to my channel for more DIY, recipes, and collaborations from the UK here: kzbin.info_c...
Tools and supplies you’ll need for this project:
- Pencil & tape measure
- Timber for framing
- Saw
- Sprit level
- Screws
- Screwdriver
- Drill and drill bits
- Coping saw
- No More Nails
- Decorators Caulk
- Filler
- Sliding doors kit (I use Rothley Ares 3)
- Hacksaw or Angle Grinder
- 18mm Sheet MDF
- Wood paint
- Sandpaper
0:00 Intro
0:23 Prep
1:11 Build frame
2:48 Fill gaps
2:56 Cut tracks
3:54 Cut doors to size
4:24 Pain woodwork
5:00 Screw wheels to doors
5:33 Screw tracks into place
6:05 Fit doors

[@BeardyBrooks]

Exactly what I was looking for. Hoping to do this in the coming weeks, thanks!

[@mrglaister3937]

Great video saved me a fortune

[@jawadkho]

Quick, easy and cheap. This is fantastic!

[@WarrenNash]

Fab, glad you like it. It makes the world of difference in the room - so much tidier.

[@c.marmion8430]

Great idea! I'm not a DIY enthusiast, but it's a great idea if I can employ someone to do it for me 🙂.

[@WarrenNash]

Thanks very much :-). Good luck finding someone.

[@kenrickfagan628]

Fantastic

[@craigarmitage6792]

Looking to do something similar to this. Can the same be achieved where the roof is sloping downwards -we're an end terrace on a steep hill. I presume you'd just have to square it off.

[@jayanthirao4402]

It's really a great tutorial. I want to implement it. Can you explain how did you make the angle v cut on the wooden plank which attaches to the beam?

[@serbaresep]

Mantap sekali Kak

[@jordangreatorex4615]

How did you angle on angled beam ?

[@massihaz07]

What's the difference between Rothley Ares 2 and 3 kit?

[@khaliqdadkarimi7783]

Hi Where can i get the sliding tools please.

[@dddboom]

Bit annoying how your radiator and plug sockets are in there