DIY EPIC HOME STUDIO BASS TRAPS AND ACOUSTIC FABRIC WALL!

Рет қаралды 22,092

Күн бұрын

Пікірлер: 34

@OriginalCatfish42 8 ай бұрын

Whenever I watch these diy videos I always get jealous of your building style in America. mounting anything to the wall in europe required so much drilling in concrete and brick, and praying you're not drilling into a water line.

@sologemeni 8 ай бұрын

worst thing to be jealous of, man. their homes are made of paper

@Bawamode 4 ай бұрын

for real

@Polentaccio 9 ай бұрын

Exactly what I was looking for. Building out a space ( going to be an L shape so tricky) with one to two bulkheads ( structural so hello bass trapping) and this gives me an idea of what I will need to do. I am going to be running only a few electrical lines in and running exterior though, trying to cut down on bleed as I will have my drumkit in the space with a control area.

@soundheadquarters 9 ай бұрын

Thanks for watching and have fun with your project!

@theshchannel5849 7 ай бұрын

Thanks for a nice video! Question: Are there any guides and regulation that you shall follow when doing this kind of installations? How do you think and what rules do you follow? And then I more or less solely think about the acoustic considerations!

@underpressure7321 Жыл бұрын

I wish you worked in Alberta . Great work❤

@soundheadquarters Жыл бұрын

I can work in Alberta! Please email or reach out through the contact page on my website to discuss

@homeofcreation 8 ай бұрын

Great job!

@soundheadquarters 8 ай бұрын

Thank you!

@Ruben.R Жыл бұрын

Amazing work 👌

@soundheadquarters Жыл бұрын

Thank you!

@christianjacquet4095 9 ай бұрын

Salut , Pourquoi laisser le haut et le bas vide sur les bass traps ? Une utilité ? Merci , 😉😎

@Bob-exponentiel 4 ай бұрын

How much cost this kind of job?

@_ren5506 2 ай бұрын

how many 2x2's did you use mate?

@danmart2585 5 ай бұрын

Question: why would you choose the labor intensive wood wall strips over another layer of Sheetrock?

@soundheadquarters 5 ай бұрын

If the clients objectives were to isolate sound better, then we would have done another layer of 5/8ths drywall. However the client only wanted to focus on the acoustic properties of the rooms, and is familiar with recording in other studios live rooms with wood walls. The wood has different reflective properties compared to drywall/sheetrock. Thanks for watching!

@MrTeff999 5 ай бұрын

I spent a lot of time studying this subject before my own project. Here's what I know: if you want to stop sound from going through a wall, an additional layer of Sheetrock will provide almost no improvement. You would, however, get a noticeable improvement if you apply a layer of Green Glue noise proofing compound between two layers of Sheetrock. Better yet, do the same on both sides of the wall. Even better, remove the existing Sheetrock and install resilient channel, then two layers of Sheetrock with Green Glue. Better still, remove the existing Sheetrock (on one side) and install new framing so the two sides are completely decoupled, then double layers of Sheetrock and Green Glue and both sides of the wall. One more thing: sound doesn't travel only through walls. It also travels through attics, duct work, floors and windows, so those might also need to be addressed. If you are interested in knowing more about my experience, feel free to send me a message. I'm happy to share what I've learned.

@thuhaze5946 8 ай бұрын

What is the laser are you using?

@torevenheim9607 6 ай бұрын

You should Talk in the room before and after 😊

@billyolsson3340 Ай бұрын

u want air behind the absorbers. Not mounted directly on the wall like you do in the video.

@bryanlee8664 7 ай бұрын

whats stopping the fibers from the insulation from passing through the fabric and breathing it in?? i want to make one but this is my only concern.

@soundheadquarters 7 ай бұрын

That’s what the fabric is for. You can use acoustic grade fabric like guildford of maine or equivalent if you are concerned

@pistopitpit 6 ай бұрын

If it's less than 10cm thick then forget about any bass absorption at all.

@greganikin7003 6 ай бұрын

I’d say less than 50 cm deep:)))

@Angellus502 4 ай бұрын

I put a old rug with some towels and a feather doona rolled up in it just standing up in a corner - only about 15cm round. I didnt think it would do much but when i re measured the room it clearly improved RT60 below 70Hz by 35% (bass reflection and roll off time) and room phase cancelation issues at 78Hz by around 3db. Not perferct, but any improvement is better than nothing.

@newrockorder 6 ай бұрын

What are these US walls made of? German walls are made of stone....

@christopheroliva7768 6 ай бұрын

Most walls in the US are covered with drywall or gypsum. Exterior walls are block usually.

@MrTeff999 5 ай бұрын

@@christopheroliva7768 Exterior walls are block or brick in some parts of the country. But also wood. Here in Southern California, it's usually stucco.