DIY Exhaust Muffler | Stainless Steel

#gpgarage #diy
Homemade stainless steel exhaust muffler.
Inlet 48mm, tips 2x60mm
Thanks for watching.
For more video like this check my channel.

[@bransonbasher6534]

Very well done! Thank you for including the sound test, priceless information. Thank you very much

[@user-wr3ll7jw3v]

Good job!

[@joeolivas4941]

AMAZING WORK PLEASE MAKE A CORSA MUFFLER WITH YOUR OWN PERSONAL MODIFICATION

Ficou MUITO bom 👏👏👏

[@waqshah5160]

I'm opening up my own exhaust shop soon and all I can say, from one welder/fabricator to another, your work is beautiful mate keep it up my friend 👌👍

[@GPGarage1]

Thanks mate and good luck with shop. 👍👍

[@waqshah5160]

@@GPGarage1 cheers mate! I do have a possible recommendation though for another video for you, I've been struggling to design and fabricate my own exhaust tips, you reckon you could help?

[@GPGarage1]

You can email me ([e-mail]) what you think and I'll see if I can help.

[@IgnisMan]

Sound's better than Stock but not too loud 😁

[@sachithkodagoda8086]

super

[@dostonbek193]

masterful work

[@GPGarage1]

Thanks

[@davidmakovec4606]

hello, please, how thick is the sheet metal most exhaust silencers are made from?

[@mafosa9563]

"priceless!"

[@aknovaman]

I really wish you would be willing to vuildctgese for others.

[@domch6450]

Waouuu ! Mais pourquoi il n’y a pas d’isolation ? Merci

[@GPGarage1]

In this type of muffler does not insulation.

[@domch6450]

@@GPGarage1 ah ok . Very god work 🔥🔥🔥

[@GPGarage1]

Thanks 🙂

[@tungnguyenngoc4686]

Loại này tiếng gầm của xe thể thao.

[@El_Parais0]

Сделал такой же глушитель, по ощущениям машина хуже ехать стала, чем вообще без глушителя

[@GPGarage1]

I don't know what you did, on this Opel Astra this muffler works perfectly, it's not too loud and it has a nice sound.

[@El_Parais0]

kzbin.infoMpCtCHJgXFg?si=oyZ94fNH6x5BpymE This is what made a bmw e39 2.8 liters, a pipe in the interior 63mm,) ​@@GPGarage1

[@GPGarage1]

Flow direction is wrong in your case, v shape insade must be " inlet--> < --> outlet". And shorten that pipe after v plate towards the exit, you will get a better flow.

[@elparaiso8265]

I did it differently than in my video, bricking the partitions Flow direction - >> =[ =| < =| ]= Is that right?

[@GPGarage1]

Yes, you can also shorten the pipe after the V sheet for better flow. I made muffler like this for my e39 523i and also was working perfectly, only in my case it was 76mm inlet and 2x76mm outlet.

[@haque_motopsychoz]

Bgm not matching 😢