DIY F-8 Crusader RC Jet with Ducted Fan and Pusher Prop : Which One is Better

[@attiliodemoliner7920]

You have reached the highest level of professionalism and art.

[@michaelrichard4142]

This was fantastic!! My favorite part was the sound of laughter and fun among a group of friends enjoying the hobby. I am very inspired.

[@JuliusPerdana]

Awesome! Thank you!

[@olivia-x6y]

You are a true craftsman, builder and RC pilot. I enjoy everything you build from scratch. Well done

[@robertgoldbornatyout]

This is truly what a plane enthusiast can do. Mind blowing job👍👍👍💯💯💯

[@soliv27]

I wish the prop pusher was better cause cheaper and simple but the edf principle and its noise, it really makes this big dangerous army jet completely alive ! Thanks for showing many building details, youngest don't know how lucky they are to access channels like yours.

[@Flying4Film]

Awesome build. The Crusader and the Vigilante are my two favorite military planes of all time. Everything about the Crusader looks so cool.

[@hifinsword]

The RA-5C Vigilante is my all-time favorite!

[@jeremysargent5037]

Very successful. The Crusader is also not done very often. Nice!

[@eg395]

One of many Navy and Marine fighter planes from back of the day. Thank you for posting. Beautiful plane!

[@JuliusPerdana]

Thanks, one of my favorite jet

[@ivanzlatar2445]

you never disappoint ! Well done !

[@drewrodaniche1541]

Thoroughly enjoyed this! Greetings from UTAH!

[@JuliusPerdana]

Awesome! Thank you!

[@vincemvagusta68]

Another amazing plane! I'm learning lots watching your videos, lots of excellent engineering and detail, seriously excellent work 👍

[@JuliusPerdana]

thanks for watching my video

[@walk4718]

Sir! You have certainly improved your channel as if it needed it. Having assistance, I’m sure has helped your efficiency. This is a fine model. My vote is for the prop power. Simple, lighter, less expensive 👍

[@hifinsword]

Great work! Your F-8 looks and flies so well. I use Adams Readi-board for models. It's 4.5mm EPS foam with paper on each side I think or 5mm thick. Instead of cutting multiple slices on the inside of the fuselage to bend it into a curve, I remove the paper on the inner side. I've been doing that, and then bending the piece on an edge. On some models I remove the paper on the outer surface as well once it's complete then recover with newspaper and glue. It can then be painted. I haven't added heat to help but maybe I will in the future.

[@wonderscraft]

This is truly what a plane enthusiast can do. Mind blowing job 🤯🤯

[@mkroeseler]

Good job ! The EDF sounds really great! Congratulations my friend! Best Regards Martin / Berlin Germany 😉

[@muzkat101]

Adding the ducted fan made the plane... very nice.

[@VTOLKits]

Great machine and "whoosh..." jet sound....! 👍👍👍👍

[@thebunkreport]

I only wish I had this kind of skills! Great job!

[@userTJ39780]

Your finishing touches are legendary!

[@tommyyates4639]

This is a an awesome achievement Julius. Simply stunning. It looks very nice and appears to fly very well. I am amazed at your skill!

[@lorenzoheriberto430]

Todos sus trabajos en Aviones a Control Remoto son profesionales y lo felicito por su sus trabajos.

[@JuliusPerdana]

Thank you so much

[@supercontroleremoto9292]

Você não imagina o quanto eu estava ansioso por ver esse excelente projeto ser tranformado nesse também excelente video. Parabéns do Brasil.

[@waqarzaman7592]

Hi Julius ... Your work is so amazing. I am a big fan of you. You teach it in incredible way.

[@erbroens2]

Fantastic. Your designs are getting better and better.

[@claudio743]

I got no words........simply,AWESOME!!!!!!

[@Lopez_rc]

That’s beautiful! Love the edf

[@JuliusPerdana]

thanks mate

[@Spetznatz01]

I really need to make one of your RC planes! I’ve built several of your paper models and they’re always fantastic. These look awesome, so much more detailed than manufactured RC planes!

[@JuliusPerdana]

Thank you very much!

[@shawnrinkel8377]

Wow man just found your channel. What works of art you make sir and they look like they fly great.

[@fallgoodboy4368]

Buatan om Jul itu emang ga ada obatnya Ibarat apotek tutup...joos tenan pisan

[@warrenmoy4251]

Once again. Look amazing sound grate.

[@JuliusPerdana]

Thanks again!

[@AEROERGO]

I didn´t finish yet but Roy must show us how to make that liitle iron! looks neat! 😃

[@JuliusPerdana]

good idea, I will make a video about that

[@AEROERGO]

@@JuliusPerdana great!, it will be a success for sure! - I will stay with the pusher version i think, i always prefer a lower wing loader. Cheers!!

[@ralphmadera4366]

Genius , awesome skills and craftsmanship 😮

[@brianstavert5678]

Beautiful workmanship

[@wesleyperry2037]

Very cool 😎 flying model. Great job 👍

[@AngelCuadrado7]

This is a beautifully desing plane plan and an excellent executed job by Roy. Any chance that one day you would be doing the Noth American T-6 Texan trainer? Thank you very much Julius. Your channel is one of the most rewarding and constructive channels i have ever come across in KZbin. Keep up the great work. Greetings from Spain.

[@jwc4520]

I am a big fan of your work and did try to modify your F-4 into the YRF-4E...I messed the nose section up ...tonthevpointbof embarrassment. But I shall try again health permitting. Such beautiful toys, you have become a master builder . I have seen much improvement over the years and increasing more difficult designs which you find simple answers to. Amazing take care.

[@crystalclearwindowcleaning3458]

Definitely well done! Thanks

[@Spritefound]

Wonderful build of one of my favorite planes.

[@JuliusPerdana]

thanks mine too

[@JonathanQ-h7c]

I have waited a month for that I'm so happy you finally post it

[@hyzero6569]

I am so amazed at your skills!

[@manuelbeltranmeza]

Amazing model, congratulations. greetings from Mexico.

[@newerarc876]

Absolutely AMAZING! I'm going to make this one, let me know if you need the retractable 3d printed landing gear files.

[@AndreSilva-jq9kq]

Excellent project Julius is a beautiful jet, I'm going to build it using the EDF system.

[@JuliusPerdana]

thanks, have fun

[@bjornd.4805]

Nice Build and Flight. Greets from Austria

[@geriwinkler4391]

well done, as usual. Nice landings and the ducted fan sound!! Top! It looks, edf in that setup more power, than pusher, or?

[@danielequirico8241]

Great Julius as always wonderful work

[@jen36371]

Great model!

[@blubard6105]

Excellent craftsmanship!!!😊😊😊

[@frankthelegendary]

Hey Julius awesome build as always keep up the great work.

[@JuliusPerdana]

thanks

[@anglerkacang]

keren om... Salut ma om julius.. Karya nya bikin ngiler... 👍👍

[@RobertIreland-dk3lr]

You keep coming up with beautiful models of beautiful subjects. I built your Stearman last year and it is a joy to fly. Since then I have your T2 nearly finished and am expecting it to be every bit as lovely as the Stearman. Just started work on your iconic DC3 this week when I spotted the Crusader. I'm going to need more foam! I have been finding with some practice, that the foam sheets and hot glue construction is a very satisfying build method.

[@dunkerke1]

fantástico el trabajo, lo difícil ,lo hace sencillo !! En hora buena

[@JuliusPerdana]

thank you

[@piotrp92]

Nice job as always! But why do you use a Y-wire to connect ailerons? You have a Jumper/Radiomaster radio with fully programmable channels. It will be easier to set position independently and make differential movement. Cheers!

[@JuliusPerdana]

Thanks, my BetaFPV Elrs RX only has 5 channel

[@AEROERGO]

I wish one day i could be part of the "builders for videos team" hehe. Specially if you made an Argentinian plane.

[@oo-oh3wy]

Woahhh, perfect Work👍👍👍👍 perfect landing, congrats

[@zezefilmagens]

Very good my friend.

[@rizkysolehman8788]

Keren sekali om, jadi pengen belajar tentang rc pesawat

[@MaulMachineChannel]

awesome video! very creative uncle

[@Jay-zc7iq]

Yes!!! Finally some EDF success 🎉 nice job sir unfortunately I can’t build this one as I got a years worth of your planes to fly bird dog sat there berkik 3 and much more I’ll be tackling your A10 soon and I’ll get it to fly , thanks again sir 🙏

[@trailblazer8380]

Dude, youre a genius!

[@JuliusPerdana]

no I'm not, but thanks

[@amirhosseinketabi7798]

Great as usual 🤩😍👍🏻👌🏻

[@SevvanaLikith]

This model is really beautiful. Can you make a model of LCA Tejas.

[@Mightymouserc]

Great flyer I think the edf is the way to go

[@Batang_72]

Very good plane build bro👍👍👍

[@Castellonvuelapasionporelhobby]

Fantastic as always, greetings

[@jankaas8005]

Can u make a glider like a discus? Love ur content would like to see you build one

[@scottfordbrewer4380]

First time I ever saw missiles on the side of the fuselage wow!

[@JuliusPerdana]

1950-60 was full of experiment in military aviation technology including this F-8 Crusader

[@matrixtoyshobbies]

6:30 what a skill!!

[@SeekingTheVerdants]

Sir, you made me love the Crusader again! It seems like you made two airplanes, one with wheels and one without. How did you retract the gear on your flights?

[@thorstenschocklmann9909]

Awesome build ❤

[@chrismanning1171]

Looks amazing.

[@the_hybrids_gang]

whats up Julius i love your videos and i've been wondering why you haven't been posting much but i'm glad to see you back now and i think the plane was much better with the brushless EDF motor even with those air ducts it made it sound just like a real jet

[@JuliusPerdana]

maybe there's something going on on KZbin algorithm, because I always post at least a video every month, buy yeah "I'm coming back" with more to come! Thanks to watch this vid

[@rcbinchicken]

Wow this might be your best looking build yet! Beautiful!! 😄 And it flew great with both power systems. Although I always use props I must admit the EDF sound was incredible. One note, your CG was nose heavy because using a flying wing calculator does not take the horizontal stabilizer into account. One way around this would be to work out the CG of the wing with the calculator, then work out the CG for the H-stab as though it were a wing, and then work out the average CG by the proportion of the two areas. You should end up with a CG similar to your own calculation before, but a little further back. It won't matter this time, as you seem to have got it right with the "grass test" 😛 but maybe useful for future.

[@JuliusPerdana]

20% MAC = nose heavy, but 25% MAC = spot on

[@userTJ39780]

It looks exactly like my Freewing 64mm F-8 Crusader! Just needs the refueling bulge on one side.

[@carlosalberto-sv9fm]

Belíssimo trabalho Julius parabéns muito bom

[@aldozusano5090]

Cómo siempre buen trabajo Julius pero también realice un proyecto de me 262 y también me bf 109 también desearte un feliz y exitoso año nuevo 👍🏽

[@gulsmvlogs4170]

Excellent work!

[@chrismanning1171]

I am currently cutting out the paper stencils for this plane. I plan to use the 80 or 90mm edf. I will post of a video when I am finished.

[@JuliusPerdana]

Fantastic, have fun!

[@igorek138]

Cool plane 😎

[@ECVDuco]

Fantastic work, really enjoyed the video, lovely plane, where did you find the pilot 3d model? is available for download?

[@JuliusPerdana]

I bought it from Cults3D

[@robertedney3892]

Very nice 👍 could you please tell me what cheat holes are, I've never heard that before 😊

[@JuliusPerdana]

cheat holes are made to maximized the air sucked by the ducted fan, because of obstacles like cables or other parts inside the air intake tube into the fan

[@sidariell6762]

Om Julius bikin a4 Skyhawk pake edf 64mm dong😁 kayak di 16:13

[@albertomaligne8933]

Hi Julius, i need to buy a tx/rx equipment. Would you do recommend me a brand to buy. Thanks in advance

[@ClipperProductions-he4xh]

looks great! what do you think the effect will be if I put the motor for the pusher prop in the center of the wooden plate on the jet? do you think it will still be ok to fly like that? I would not intend to take off from the ground

[@JuliusPerdana]

it should be on the center

[@BOGDAN19761]

Надо для EDF ещё побольше воздухозаборников вырезать. Тяга тогда увеличится.

[@alexandererhardt7895]

With EDF, there is much more happiness 🙂

[@dyshweb1947]

Can you make "dornier do 228" because i was saved by that plane one time Thank you

[@userTJ39780]

Lulu the cat FTW!

[@samuelsherwood298]

JUST WOW!❤

[@erobelmelaku]

please make us a video showing how you make the décors for your rc planes, or just give us a hint,.. please

[@unitygamer6806]

Sir can i use styro foam instead of depron foam

[@khpalwhakafghan9999]

What foam are you use

[@JuliusPerdana]

polyfoam/ depron foam/ foam board/ dollar tree foam board/ XPS foam/ KD foam board

[@julioespino319]

Belleza ..Julius podrás en spanish Please cc.. Saludos

[@budykopralhiburanedukasi9119]

salam satu langit Bang Jul... dari dieng,, subcriber pemula yg sudah manula Bang Jul... ijin belajar

[@JuliusPerdana]

monggo om

[@ScrambleAlbyScramble]

When is the Panavia Tornado IDS? 😁

[@prowingplane7380]

Sir I am Big fan of you

[@hervesimondin9178]

Magnifique

[@RCCyrus]

I need all types of wings finding cg can I make a 1 vedio for me plzz

[@chrismanning1171]

What are you using to make the cheater holes for the edf?

[@JuliusPerdana]

3mm plywood

[@frankthelegendary]

Julius I wish you would build a F14 with moving wing

[@JuliusPerdana]

someday