Рет қаралды 19,092
In this video, I will show you how to make a fast-charging power bank by using 18650 laptop battery. The charger can support multiple fast-charging protocols (AFC, QC2.0, QC3.0, FCP/SCP).
#18650powerbank #FastChargingPowerbank #18650laptop battery
NextPCB is one of the most experienced PCB manufacturers in Global, has specialized in the PCB and assembly industry for over 15 years. Not only could NextPCB provide the most innovative printed circuit boards and assembly technologies in the highest quality standards, the fastest delivery turnaround as fast as 24 hours.
Only 0$ for 5-10pcs PCB Prototypes:www.nextpcb.co...
======================================================
Specification:
👉 Input voltage range: 6V-32V
👉 Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
👉 Output power: maximum 24W (5V /3.4A, 9V /2.5A, 12V /2A)
👉 Support fast charge protocols (AFC, QC2.0, QC3.0, FCP/SCP)
👉 Input overvoltage, under-voltage, and overcurrent protection
👉 Output overcurrent and short circuit protection
=====================================================
Materials Used:
1. 3 x 18650 Battery: bit.ly/3zJAl4W
2. 3S BMS Board: amzn.to/369ovmK
3. Power Bank Module: bit.ly/3hMXmMb
4. Self-locking Switch: amzn.to/3xjbC5y
5. DC Jack: amzn.to/3An42J7
6. 22 AWG Wires: amzn.to/3cIqzpL
7. Insulating Rings: amzn.to/3yjyxhf
8. Heatshrink Tube: amzn.to/368Qymz
8. Kapton Tape: amzn.to/3xjbR0s
9. Nickel Strips: amzn.to/3hd2Ro0
Tools Used:
1. Spot Welder: bit.ly/3vzq205
2. Spot Welding Pen: bit.ly/3nE5EIy
3. Soldering Iron: amzn.to/3vAh8zx
4. Wire Cutter: amzn.to/3t8Zbq9
5. Wire Stripper: bit.ly/2pAyzUm
6. Hot Air Blower: amzn.to/3ebL7Io
7. Multimeter: amzn.to/3t9ULzd