DIY 2S3P Battery pack | 7.4v - 8.4v | DIY Battery pack | Lithium battery

DIY Battery pack 2S3P, 7.4volts - 8.4volts, Made with 18650 Lithium battery,
This is soldered battery pack.
BMS used in this pack is HX-2S-D20 | 4 MOS Battery protection board | 2S 20A
Electronics, technical, electronics projects, electronics DIY projects, electronics review, electronics experiments, Electronics, Electronics review, electronics experiments, Technical electronics, Playing with electronics, Fun with electronics, Electronics components, electronics education
Epic Trailer by LesFM | lesfm.net/
Music promoted by www.chosic.com...
Creative Commons CC BY 3.0
creativecommon...
-----------------
DISCLAIMER:
CONTENT RISK OF FIRE HAZARDS, ELECTRIC HAZARDS, CHEMICAL HAZARDS AND OTHER HAZARDS.
DON’T TRY THIS AT HOME, SCHOOL OR ANYWHERE ELSE OR DO IT YOUR OWN RESPONSIBILITY.
CONTENT CREATOR IS NOT RESPONSIBLE FOR ANY DAMAGES AND LOSSES.
VIDEOS ARE CREATED FOR ENTERTAINMENT AND FUN PURPOSE ONLY.
-----------------
#diy #diyelectronics #howto #howtomake #review #testing #diyfun #electronicsfun #electronics
#2S3P #Batterypack #7.4v #8.4v #nickelstrips

[@sh0rts889]

The perfect video I wanted

[@sh0rts889]

Thanks sir for this video

[@sh0rts889]

Sir lekin isko charge kaise kare????

[@Mimo21992]

*Nice video*Ty*

[@LeatherneS]

7:58 hello ant mate ^^

[@manuelpalaciossantil]

excelente, tendrá un vídeo para 2s2p y que no mueva tanto las pilas para poder seguir la secuencia de conexión. gracias

[@russellctgbd]

2S BMS but Amp??

[@dandy22ful]

how many volts do you need to charge this pack or in general how many volts and amps does charging takes

[@886luke]

You should invest in getting some flux…

[@ziggy-pn4ts]

How do you charge the batteries now that everything is together

[@frankorosz901]

Hook charger plus to red and charger negative to black wires.

[@adnanjm5504]

You are damaging the battery by putting so much heat (soldering) The audience should know that you are making a severely damage to your 18650 Man order a mini spot welder

[@lets.powerup]

If you r making larger battery then soldering is not professional way I think

[@christopherbandola6629]

This battery is posible to used for spot welding?

[@lets.powerup]

No, spot welding require very High current

[@miteshdhanani]

Want to make a battery circuit of 6v 3A and connect to a solar panel 3W 8.97v 3A

[@MontuGomes-qu1pn]

6:50 6:56

[@sahityabodra1412]

Sir how to charge.. ?

[@tristanfernandes1361]

TP5100 Charging module.

[@GaneshJadhav-kn8mb]

Can i use tp5100 module to charse 2s2p battery??

[@ahmedothman7055]

How much ampere

[@lets.powerup]

Each battery is rated 1200mah x 3 3600mah

[@frankorosz901]

The bms appears to be a 13 amps bms. (That's a lot of power. Be careful.)

[@محمدمهدیترکمانی-س1ع]

I know it a long time but what's the max output current??

[@dalemettee1147]

How big are the strips of metal used to connect all the batteries?

[@cat-cambodia1801]

Good video, 👍

[@Kotofey_13]

Подскажите а на 8 таких батареек какую плату ставить и как правильно спаять

[@aseelbirdsanimals3940]

2s bms battery pack py dc motor dc motor speed regulator k sath work q ni krta

[@ahmetoyunda9486]

Amatörce 😊

[@tetetolin]

Pregunta amigo el voltaje de entrada a los BMS Cual tiene que ser por ejemplo ,si es de 3 celdas pueden ser de que rango superior ?

[@lets.powerup]

Max voltage is 8.4and BMS is for 18650 batteries only ,2S build

[@tetetolin]

@@lets.powerup gracias por tu respuesta pero me refiero al módulo completo 12,13,14vdc

[@onixapp9189]

Como eu sei q ela carregou totalmente

[@lets.powerup]

It is recommended that such kind of batteries to be charged on bench power supply for better personal safety

[@tetetolin]

simpático su vídeo y es bueno que muestre sus errores así uno aprende jajajajajaja

[@lets.powerup]

Thank you

[@MayankJairaj]

Agar mai 2s3p charge raha, then how much current do I need to provide the batteries? 8.4V 2AMP is enough or do I need to increase the amps given?

[@lets.powerup]

Yes it is enough, also note charge current will depend upon your battery capacity

[@MontuGomes-qu1pn]

6:50 6:56

[@6mariooo235]

how many batteries can i pun into that bms?

[@luispabon3237]

What is the liquid you are putting in?

[@sumeetkumar181]

That's flux "soldering paste/flux" used while soldering

[@derricktrujillo283]

Amigo ese BMS de cuánto Amperios es de salida

[@lets.powerup]

20 Amps BMS

[@frankorosz901]

That appears to be a 13 amps bms.

[@mvdhanani]

U have made it its nice but if we want to connect it with a 3W 8.97v 3A solar panel then

[@lets.powerup]

As your plate is 3w, it will take some time to charge.

[@mvdhanani]

Can I have circuit diagram

[@miteshdhanani]

I am waiting for your reply not received any response

[@ShawkatBadiniHD]

Great ‌

[@MontuGomes-qu1pn]

6:50 6:56

[@amithkumarparjapat1673]

8v and mah..?

[@frankorosz901]

That appears to be a 13 amps bms. (A lot of power. Be careful if you use that much or more will blow bms.)

[@tortoise2009]

How to charge battery

[@hermanussi]

Charge with bench power supply set up to 9V and 1A. The charging board will only let max. 8.4 V thru. The 1A will start to decrease as time goes by as the battery start to fill. Board will shut off automatically at around 30mA and 8.4V. You can also use 9V charger or adapter, the highest amps will be stated on it. The board can also be at maximum connected to 12v charger /adapter since the board will only let thru 8.4V. More than 12V's and the Mosfets will start to fry.

[@tortoise2009]

@@hermanussi thanks for reply

[@hermanussi]

Glad to help! 👍

[@sanjar9744]

سلام كيف تشحن

[@frankorosz901]

The question is not clear.

[@naeemquershi2116]

Bms tu dekha dete konse ha

[@p1xelman]

poor soldering skills..

[@lets.powerup]

Learning from mistake 😸,watch till end

[@ОлегМоргун-д8р]

it is better to buy 18650 batteries with boiled spikes, so when soldering with a soldering iron, we will not kill the battery.

[@klikmysite5451]

kalau pakai 10 batre bisa ga Om....Itu BMS nya

[@frankorosz901]

That appears to be a 13amp bms. This configuration appears to have battery setup that could burn out bms if you tried powering device that draws more than 13 amps. Using 10 batteries (5+5) while keeping below 13 amps draw would just allow the draw to be longer lasting before need to recharge. (Remember that 18650 batteries can provide a lot of amps and if that is done there will be a lot of heating and chance of catastrophe failure, fire, explosion, etc.)