You certainly have the cutting sequence worked out. 😎
@ShamsProf2 ай бұрын
Здравствуйте...интересное у Вас Видео
@nordenconrad14yearsago452 ай бұрын
What is the original plasma table model brand ?.. or is it diy?
@trevordeemie6742 ай бұрын
What light source and lense are you using?? Do you have any build videos
@TAMARbarCNC2 ай бұрын
Raycus 2kw laser source
@magnusotsa66183 ай бұрын
Focusing looks very smooth, what type of autofocus system does your laser have?
@TAMARbarCNC3 ай бұрын
It's not auto focus. Auto focus in fiber laser is something else entirely. What I'm demonstrating in the beginning of the video is THC
@magnusotsa66183 ай бұрын
@@TAMARbarCNC Wow, how is this possible, most THCs use arc voltage to maintain a consistent distance from the plate while the torch is cutting but you were demonstrating it without cutting, nor does a fiber laser have a arc. Awesome machine that you have built btw!
@TAMARbarCNC3 ай бұрын
My THC uses arc voltage as well. I've managed to connect the fiber laser head capacitance sensor to the thc. So the sensor sending voltage to the thc, and the thc thinks it's arc but it not haha.
@magnusotsa66183 ай бұрын
@@TAMARbarCNC Great idea! Looks like magic tho
@gianpaolozeltner2 ай бұрын
hi, nice video , do you use a air or another gas? thank you
@TAMARbarCNC2 ай бұрын
I use oxygen
@kalyanasundaram15833 ай бұрын
Nice, are you using servo motor
@TAMARbarCNC2 ай бұрын
Yes
@chrisfischer5112 ай бұрын
If you were to build another sheet and tube 4axis fiber from scratch today what control would you use?
@TAMARbarCNC2 ай бұрын
Fscut3000s
@chrisfischer5112 ай бұрын
@@TAMARbarCNC thank you for the answer. But after looking at the manual and youtube video of controller that the fscut3000s will only cut tube and not sheet. Is that correct?
@AB_Tool2 ай бұрын
What software do you use that writes the code for doing that pipe on that 4th axis ?
@TAMARbarCNC2 ай бұрын
Sheetcam rotary plasma plug in
@BeggaeBest12 күн бұрын
היי, נראה מדהים, גם אני בניתי פלאזמה ורוצה להפוך אותה ללייזר, יש מצב להתייעץ אתך?
@TAMARbarCNC12 күн бұрын
מוזמן אחי 0525686316 תמר בר
@sgindustrial64483 ай бұрын
Hi! what is THC model?
@TAMARbarCNC3 ай бұрын
I'm using centroid acorn 4 axis plasma controller. It's a plasma controller kit from centroid that includes THC, and I've made it compatible with fiber laser.
@sgindustrial64483 ай бұрын
@@TAMARbarCNC Thancs!
@kalyanasundaram15832 ай бұрын
Are you using closed loop stepper dude
@TAMARbarCNC2 ай бұрын
Currently yes, besides the rotary axis with is servo. I plan to replace all the close loop to servo.
@kalyanasundaram15832 ай бұрын
Why in closed loop finishing not good dude?
@TAMARbarCNC2 ай бұрын
@kalyanasundaram1583 they are not fast enough and and the acceleration is not fast enough.
@kalyanasundaram15832 ай бұрын
What frequency you use to cut in raycus dude
@kalyanasundaram15832 ай бұрын
What is pulse repetition rate and pulse width you set in raycus source software in hardware emissions control
@ShamsProf2 ай бұрын
Голова ВТ240S
@renyk2 ай бұрын
Hi my friend, I make my own fiber laser 1K, but my controller only use 3 axis, could you told me wath controller you use, the model, I wanna replace my raycus for this, I realy need the 4th axis, thanks
@TAMARbarCNC2 ай бұрын
You want to cut sheets and tube also?
@renyk2 ай бұрын
@@TAMARbarCNC Yes, for the moment only I cut sheets, but my controller don't have the 4th axis.
@TAMARbarCNC2 ай бұрын
@renyk if you want to cut tubes square tubes I recommend that you'll use fscut3000s
@renyk2 ай бұрын
@@TAMARbarCNC Tanks my friend, let me check about this controller.