Join me as I fit a new bedroom carpet. Please note that I am not a professional carpet fitter.
Пікірлер: 203
@martynlloyd-harris15138 жыл бұрын
Good effort on your DIY underlay fitting & preparation. I am a certified Master Carpet Fitter of 34 years and I would just like to give you a few helpful pointers if I may? 1. It is important to have fitted that little bit of gripper under the radiator for two reasons. Firstly, so the carpet can retain its tension properly and secondly for it to be finished off the same as the rest of the room. Cut the gripper in 6 inch pieces and use a hot melt glue gun to quickly glue them in place. 2. You fitted the underlay upside down. 3. When fitting PU underlay you don't quite fit net to the gripper, as this underlay expands and will rise over and onto the gripper once the carpet is in place. The result is, you won't be able to get a flat smooth finish on the gripper. Cut slightly back if you can. 4. No need to put so many staples down. Secure the underlay in the corner's and along the joins. Putting so many staples in may attract filtration marking on the carpet. 5. On a wooden floor it is important to tape up and seal your underlay joins to prevent filtration marks on your new carpet in the future. This is when dust is blown up through the cracks of the floor boards, through the underlay joins which makes a black 'tram' like marks on your carpet, particularly if it's a light colour. This is more common around the perimeter of the room. A great effort otherwise and I look forward to watching part 2. I hope my comments are seen as being helpful to you and your watcher's. It's great to see anyone 'having a go' and saving money. I take my hat off to you Sir. Kindest regards.
@21stcenturycaveman338 жыл бұрын
+Martyn Lloyd-Harris Good afternoon Sir. I was delighted to receive your comments and your extremely valuable feedback. It was a pleasure to receive such a diplomatic and constructive response from a professional tradesman such as yourself and I am grateful for you taking the time to watch the video and pen your comments. It's a shame there aren't more people out there like yourself who are able to communicate with others in such an articulate and mature manner. I have some thoughts on how to address the points which you have raised. Keep watching. Take care and best wishes, Des
@davejones47407 жыл бұрын
Martyn Lloyd-Harris where's your carpet channel?
@dinosauraccounts14115 жыл бұрын
brilliant advice
@lisabudd75415 жыл бұрын
I will be laying my carpet later (with help) but there’s some good tips here thank you 😊
@Standoff4135 жыл бұрын
Martyn Lloyd-Harris bang on there brv
@bonganitshabalala35444 жыл бұрын
Well done mate and thanks to people like you who made these videos for us to learn, saved myself loads money in doing our house myself thumbs up....keep those videos coming...
@21stcenturycaveman334 жыл бұрын
Hello there my friend. Great to hear from you. I'm absolutely delighted that my videos may have helped in some small way and it's great that you've managed to save yourself money for you and your family. Times are hard and it's difficult enough to come by these days buddy. Your comments have made my day. Best wishes to you and yours, Des
@sharonbrooke51665 жыл бұрын
Absolutely outstanding work! Thank you for this video it’s very kind of you to share both your experience and your time 👍
@21stcenturycaveman335 жыл бұрын
Hello there and thank you so much for your support and your lovely comments. Please note that I am not a professional carpet fitter but I have done quite a bit of carpet fitting in the past few years and it always turns out great , regardless of some of the negative comments which may materialize from time to time. Have a wonderful Christmas and New Year with your loved ones. Des
@sharonbrooke51665 жыл бұрын
Thank you 🙏 I think I feel similarly, there’s things you feel confident about and things I would never even attempt. As long as it’s safe and reasonable it can save you thousands 👍
@21stcenturycaveman335 жыл бұрын
I agree entirely. Hope you've had a lovely day where you are. ATB, Des
@collecttherewards44263 жыл бұрын
I've just started doing carpet fitting and your videos are helping alot thank you.
@21stcenturycaveman333 жыл бұрын
Great to hear! Best wishes, Des
@paulglaser6492 жыл бұрын
This is a very helpful and encouraging video. I’m going to give it a try, thanks to this video. Thank you for posting
@21stcenturycaveman332 жыл бұрын
You are very welcome indeed! Best wishes, Des
@b4tm4nrubin33Ай бұрын
Gonna be doing this myself this weekend. Thank you for the video
@21stcenturycaveman33Ай бұрын
Have fun!
@Arthurmoodley3 жыл бұрын
Loving the commentary mate bloody well done. Could not agree more.
@21stcenturycaveman333 жыл бұрын
Thank you for your kind words of support. Best wishes, Des
@vwotherspoon70293 жыл бұрын
Well done and your so right in everything you say I'm going to lay my own carpet too 😊👍
@21stcenturycaveman333 жыл бұрын
Go for it! Good luck. Des
@TheDavehedgehog3 жыл бұрын
Great job,I had a go myself the weekend thanks for your tips
@21stcenturycaveman333 жыл бұрын
Glad it helped! Des
@kirstymills70439 ай бұрын
You are spot on about having a go yourself. Most things can be fixed anyway. I’ve done far too many good jobs to worry about the odd one here and there
@21stcenturycaveman339 ай бұрын
Absolutely agree. Best wishes, Des
@gennadiyfrusenko27194 жыл бұрын
Great job. Thanks for video!
@leahphilpott98923 жыл бұрын
Love your video...commentary is worth gold
@21stcenturycaveman333 жыл бұрын
Bless you. Thanks so much for your kind words, Des
@sabinaichim352711 ай бұрын
Extremely helpful. Could you explain what does he hitting of the underlay do? Is it just hitting or nailing?
@ashleylittle61292 жыл бұрын
Looks great,weldone, thanks you've helped me bigtime xx
@21stcenturycaveman332 жыл бұрын
You’re welcome 😊Des
@7d3966 жыл бұрын
Great video brother, in my country we call those people who like to criticize all the time "HATERS" and its alot of them in the USA!
@21stcenturycaveman336 жыл бұрын
Good day to you Sir and thank you very much for your support and kind words. I am very grateful. Best wishes to you and yours, Des
@allybamma14155 жыл бұрын
I hope you're not referring the guy giving helpful tips and snippets of wisdom from his years as a carpet fitter? People like you tend to be the ones filled with hate and anybody that thinks that post wasn't coming from a genuine place is sadly void of comradeship or just the feeling when you've the ability to help someone on their way. There's haters everywhere btw , not just USA , diff country, same planet.
@lesleydarby4934 Жыл бұрын
Just come across this, watching it while I'm putting underlay down, so thankyou
@21stcenturycaveman33 Жыл бұрын
My pleasure Lesley. Hope it helped my friend. Des
@lewisner Жыл бұрын
I'm moving to a new flat and I'm lucky that there is a carpet store literally at the end of the road ! For 8mm underlay they charge just £3/m2 which is cheaper than Ebay. Thanks for the video.
@21stcenturycaveman33 Жыл бұрын
Lovely job. Enjoy your new home my friend. Best wishes, Des
@naturalrestingface49093 жыл бұрын
I'm doing exactly the same as you. You wanna see my floor tiling, it's bloody awful but I don't care, it 's good enough for me! I'm doing my carpets next week! More folk need to DIY as it's a skill set that seems lost these days. I've got mates that can't wire a friggin' plug and they'll pay someone like me to do it!
@21stcenturycaveman333 жыл бұрын
Hello my friend. I hear what you're saying buddy and agree entirely. Best wishes, Des
@reecestobbs11946 жыл бұрын
You could put the gripper underneath the radiator. Turn the hammer sideways and hit the pins
@amhurford7 жыл бұрын
Thank you for the informative video.
@21stcenturycaveman337 жыл бұрын
My pleasure buddy. Hope it helps and saves you some cash. ATB, Des
@mikesand77734 жыл бұрын
Nice, friendly and informative explanation, weldone
@21stcenturycaveman334 жыл бұрын
Thanks Mike. ATB, Des
@allaboutcars95967 жыл бұрын
I am a carpet fitter just a bit of advice I wouldn't buy any carpets from Carpetright I would go to an independent business owner because Carpetright like to rip you off
@21stcenturycaveman337 жыл бұрын
Thanks for the advice buddy. Appreciated. Des
@swagon45454 жыл бұрын
No matter where you go, there all a piss take.. Got a carpet for the sitting room for my daughters house.. When got the carpet, it was creased right through the middle.. Carpet was 13 by 18.. Stuck with a carpet what was fooooookd..! They don't do refunds...
@jaypollington75594 жыл бұрын
Who fitted it? A carpet fitter or you?
@cwsing72304 жыл бұрын
Thank You Bebe
@cwsing72304 жыл бұрын
allabout cars hi, where shall I buy carpet in Ireland? Cheers 👍
@shandysouth7 жыл бұрын
Very informative many thanks.
@21stcenturycaveman337 жыл бұрын
My pleasure buddy. Have a great day where you are. Take care, Des
@Alphafemayle7 жыл бұрын
This is excellent thank you
@21stcenturycaveman337 жыл бұрын
My pleasure. Glad you enjoyed it. Have a great day where you are. Des
@FirebrandVOCALS4 жыл бұрын
this video is apprecited .. Cheers!
@21stcenturycaveman334 жыл бұрын
My pleasure. Des
@user-mp4oi8jr5y3 жыл бұрын
Thank you for this video!!!
@21stcenturycaveman333 жыл бұрын
Any time!
@zimozagrande4 жыл бұрын
Interesting vid. Thanks. I had the same problem with radiator preventing me nailing down gripper. I swapped the nails for short screws. Trouble is then you have the problem of gettin hand and screwdriver under the rad to apply enough pressure to screw them in. Fortunately I happen to have a Makita angle drill, so was able to fit a cross head bit and screw them down tight.
@21stcenturycaveman334 жыл бұрын
Hello there and thanks for your valuable comments. The angle drill is actually a really good idea. I didn't think of that. Is it an angled piece that goes into the end of the drill you're referring to? Let me know. Thanks very much, Des
@ng178jt4 жыл бұрын
Hi Des, it's Dave. Think there called right angle drill attachments and there fantastic. I've got one with a keyless chuck and are awesome for getting in to hard places. The one I've got is similar to this link. Aluminium right angle drill attachment www.amazon.co.uk/dp/B003739MII/ref=cm_sw_r_cp_apa_i_0vHeEbXPHEXNS ATB bud, Dave
@21stcenturycaveman334 жыл бұрын
@@ng178jt Hiya Dave. Great to hear from you buddy. Hope you and family are OK matey. Will check out the link. It's on my 'To Do' list. ;?)
@craigalexander78324 жыл бұрын
21st Century Caveman if you have a chrome bolster turn it round and place the end on top of the nail, hit the stem, job done 👍
@dwaynehicks79875 жыл бұрын
Thanks for the insulation links
@davidkenly2050 Жыл бұрын
with regards to the gripper for under the rad, I saw in another video someone laid a metal rod of some sort over the nails that you hammer down and hit the rod top tap ne nails in. hope that helps for your next time 🙂
@1961jagman8 жыл бұрын
hi good job on the fitting but just need to say having looked at your video closely your underlay is fitted the correct way as the lighter side is the smooth side, as I use this very same underlay along with other makes, and yes I am also a carpet fitter of 40 years in the trade. well done
@21stcenturycaveman338 жыл бұрын
Hello there. Thanks very much for watching and for your kind words. I've been very lucky to have received some very helpful comments from pro's like yourself and I'm grateful that you've taken the time and trouble to leave feedback. It's not a perfect job by any stretch but the more I practice hopefully the better I will become. Thanks again. Des
@acorgiwithacrown4673 жыл бұрын
Thanks for the useful video
@21stcenturycaveman333 жыл бұрын
Glad it was helpful!
@littlesparrowwitch3 жыл бұрын
Hello again, thanks for this video! I’ve just ripped out my old hallway and stair carpet and as money is beyond tight I’ve used foam puzzle squares as a replacement, but I still feel that I need underlay as it gets ever so cold near my front door. This video has given me more confidence that I can manage this myself. Silly question by what stapler are you using please? PS I’ve been having great fun with the teccpo rotary tool!
@21stcenturycaveman333 жыл бұрын
No problem at all. My pleasure. See below: Tacwise A11 (Type 140) Hammer Tacker www.amazon.co.uk/Tacwise-A11-Type-Hammer-Tacker/dp/B003OWR2HA/ref=sr_1_6?crid=P61SHJQM6HO7&dchild=1&keywords=tacwise+hammer+tacker+a11&qid=1601061437&sprefix=Tacwise+A11+Hammer+Tacker+%2Caps%2C183&sr=8-6 Staples: www.amazon.co.uk/Tacwise-Heavy-Staples-Staple-Pieces/dp/B000NLZAOM/ref=sr_1_9?crid=P61SHJQM6HO7&dchild=1&keywords=tacwise+hammer+tacker+a11&qid=1601061654&sprefix=Tacwise+A11+Hammer+Tacker+%2Caps%2C183&sr=8-9
@littlesparrowwitch3 жыл бұрын
21st Century Caveman brilliant, thanks. That was the one I was looking at, so I’ll go ahead and get it. I’m sure I’ll be back to your channel for more DIY advice! Cheers
@rosekunda7 жыл бұрын
Great video
@21stcenturycaveman337 жыл бұрын
Very Kind. Thanks very much. Kind regards, Des
@denisebucknall15913 жыл бұрын
Thankyou for sharing👍😁🤩
@21stcenturycaveman333 жыл бұрын
Thanks for visiting. Very much appreciated, Des
@yasminsalam16482 жыл бұрын
Hi your videos are fantastic! If I use 12mm underlay will the hammer tacker that you linked that takes 10mm staples will it hold my underlay? Or should I be looking to purchase a different tacker? I appreciate your advise :)
@21stcenturycaveman332 жыл бұрын
Yes, it will be fine but there will be more compression on the underlay, i.e. where the staple has secure it, there will be a larger depression. I'd use it without hesitation. Des
@west8ce7 жыл бұрын
thx for video..great help
@21stcenturycaveman337 жыл бұрын
My pleasure. Thanks very much for watching. Have a great w/end. Des
@paulwilson1555 Жыл бұрын
Great video, I have like a regular staple gun, would that be the same principle, or do I need the type of staple gun you use, if a regular staple gun will do, what size (depth) of staples should I use and what is the name of the type of staple gun you are using?
@21stcenturycaveman33 Жыл бұрын
Hi there and thanks for watching. I have no experience with regular staple guns but don;t see why they shouldn't work if they're heavy duty enough. This is very quick though. I've some more info' on the staple gun in another vid. Just do a quick search and you'll find it. DEs
@TOMBSTONESTAN5 жыл бұрын
Well I've been fitting carpets for 40years and that's the first time I've seen an empty room. Obviously we have to move the chest of drawers the triple mirror wardrobes full of clothes and the double bed, sometimes a massive 4postet bed an of course the 50 gallon fish tank and pianos and snooker tables and then replace and level everything oh and then cut the bottom of 5 or 6 doors off because the carpets too thick and all this for 30 quid. Believe me, you dont wanna be a carpet fitter!!!
@21stcenturycaveman335 жыл бұрын
Hiya Stan. That comment cracked me up my friend. I can just imagine how frustrating the job can be and the clueless customers who expect you to work miracles. Thanks for tuning in my friend. Hope you and your family have a wonderful New Year. Take care, Des
@louisetansley4 жыл бұрын
We are getting a new carpet for a spare bedroom, we empty the rooms ourselves but is it unreasonable to leave the old carpet down? I have tried to pull it up, even trying to cut a hole in it go get some grip but its down firm
@21stcenturycaveman334 жыл бұрын
@@louisetansley Hi there. Are you fitting the carpet or is someone else doing that for you? If you're doing it yourself you could leave the old one down I suppose and use it as underlay providing it doesn't smell and/or isn't rotted, etc,. However, if you're getting someone to fit a new carpet for you then you can expect them to charge you for their time for removing the old carpet and this would not be unreasonable. They may also charge you for disposing of it. Bottom line, if someone else is fitting the new carpet for you it's best to try and get the old one up yourself to save time and extra money. I'd also tell the carpet fitter that the old one needs taking up as he/she will probably be running to a very tight schedule and may not have accounted for the additional work on that day. Hope this helps, Des
@andrewthompson5454 жыл бұрын
All carpetfitters are professional wingers
@tex-ranger Жыл бұрын
Ha, I didn't know carpet fitters were removal people too. I've always emptied a room, removed the carpet and prep'ed the floor. It'll take me a morning to empty and dismantle the wardrobe. For £30, I think I'll get a fitter in. 🙂
@sonia3363 жыл бұрын
Thank you. This is truly helpful. I want to put carpet all over the house.
@21stcenturycaveman333 жыл бұрын
You are very welcome! Des
@AndrisPrikna Жыл бұрын
Hi, If I have a gaps between my floor boards, would you fill them in? I have about 5mm gaps between the floor boards. I can't see them being filled before. Old underlay was a black rubber type and there are a lot of dust gathered in these gaps.
@21stcenturycaveman33 Жыл бұрын
Good question and really easy to answer. Vacuum floor thoroughly paying attention to the dust and grime in the gaps. Use a cartridge and gun to run a bead of exterior frame sealant along all gaps. Then smooth over with a wet spatula / blade for a nice finish (just use an old container with water and a little washing up liquid). Done it loads of times and works a treat. I always use the brown colour. Best wishes, Des
@kisordura13794 жыл бұрын
Great thank you👍
@21stcenturycaveman334 жыл бұрын
My pleasure. Des
@unapalomablanc3 жыл бұрын
Great video. What model is your staple gun? I've not seen that type before. And what size staples did you use? Thanks
@21stcenturycaveman333 жыл бұрын
See comments section. Thx
@mdrsjd5 жыл бұрын
Great video!.......about to lay a carpet myself for the first time, can't seen to find any definitive info on which way to lay the underlay. Is there a correct side to lay upwards/downwards??
@21stcenturycaveman335 жыл бұрын
Hi there. Depends on type of underlay. There should be a rough side and a smooth side. Rough side on the floor, smooth side facing upwards my friend. I've also copied and pasted the following excerpt from United Carpets website: '15. WHICH WAY UP DOES CARPET UNDERLAY GO? If your underlay has a sticky or shiny surface, that should be in contact with the floor. If there is no shiny surface, one side usually has more of an even surface which is made from a thin backing material. This should be face up, so it’s in contact with the carpet. Hence, the spongy material that makes up most of the underlay should be face down, in contact with the floor. All underlay from United Carpets and Beds features a United Carpets and Beds logo on the side that should be face up.' Hope that helps. If still unsure, ask the retailer you bought it from. Best wishes, Des
@mdrsjd5 жыл бұрын
@@21stcenturycaveman33 Much appreciated........ Keep up the good work!
@paulclarke64354 жыл бұрын
Most commonly used in UK is the rubber style underlay.. the rippled rubber side of the underlay touches the floor... 😉
@dannybruff4 жыл бұрын
Smooth side up.... It helps taping them together too...
@chunkyleejones38314 жыл бұрын
Hiya, any info on that tool your using to pin down the underlay with...? Thanks for the heads up with the on-line underlay 👍
@21stcenturycaveman334 жыл бұрын
Hello my friend. Plse click links below. Best wishes, Des. www.amazon.co.uk/gp/product/B003OWR2HA/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 www.amazon.co.uk/gp/product/B000NLZAOM/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
@Fac323JQ3 жыл бұрын
£12 of ebay with 3000 staples free postage
@Ancient-Paths3 жыл бұрын
@@21stcenturycaveman33 Thanks for that. I watched the video after I had already stapled underlay on my stairs. That was great fun - but when I saw this hammer stapler I decided I really must have one for my next project. BTW when I saw which way up you laid the underlay - I thought I had done mine incorrectly - but I'm a mere woman so what would I know! I've seen carpet layers do it both ways. Keep up the good work.
@rhydyard10 ай бұрын
Thanks for the video..very helpful.. The job I am undertaking is almost identical to yours.. a small bedroom. had to take the door off to pare it down..Cheaper underlay from eBay and 3x4metre carpet from eBay.. a couple of paracetamol to ease the joints and away we go.. 👍😀
@21stcenturycaveman3310 ай бұрын
Hi there buddy. I hope this job went well for you. Best wishes, Des
@rhydyard10 ай бұрын
@@21stcenturycaveman33 A bit of trouble with a leaking radiator but hope to finish by this time next week.. will post back
@21stcenturycaveman3310 ай бұрын
Let me know what you had to do and how it panned out. Best wishes, Des
@kevino26223 жыл бұрын
That "staple hammer" thingy you have there is pretty awesome, I bet they are a lot cheaper than a power tool?
@21stcenturycaveman333 жыл бұрын
For sure. Plus, less moving parts and things to go wrong. Des
@frazerfenton37894 жыл бұрын
No negative comments from me, Great job 👍
@21stcenturycaveman334 жыл бұрын
I appreciate that. Thanks for taking the time to drop by. Besdt, Des
@far0n2 жыл бұрын
I've seen a couple of videos where they recommend taping the join down between lengths. Does this really need doing?
@21stcenturycaveman332 жыл бұрын
Hi there. I've never bothered at all and nothing negative has ever occurred. Personally, I wouldn't bother. ATB, Des
@muhammadadam66055 жыл бұрын
Hi, please can you advice me if i can put underlay on top of laminate flooring. thanks
@21stcenturycaveman335 жыл бұрын
Hi there. I am not a professional carpet fitter so I cannot adviuse you on this. However, I would think it very unlikely due to safety issues (?slipping, etc). ATB, Des
@dannybruff4 жыл бұрын
Can i just offer a tip when it comes to sponge under lay.... Decent pair of scissors....
@21stcenturycaveman334 жыл бұрын
God thinking - would work a treat my friend. Stay safe and well, Des
@zahrasufi94575 жыл бұрын
Hi there can you please let me know where did you bought underlay and capert please I will be appreciated many thanks
@21stcenturycaveman335 жыл бұрын
Hello there, UNDERLAY: www.onlinecarpets.co.uk/accessories/carpet-underlay/thickness/8mm-10mm/10mm-thick-carpet-underlay.html CARPET: www.carpetright.co.uk/carpets/bergerac-carpet-3i I hope this helps. Have a great weekend. Des
@-Artbyp.smith13 жыл бұрын
cheers mate your right, im sick of being ripped off
@seagreenspiral3 жыл бұрын
Can I use carpet underlay as insulation for my man cave, like the one you made recently. Also is your man cave spider proof?
@21stcenturycaveman333 жыл бұрын
Hi there. Yes, I suppose you could use underlay - it's still insulation but it will be thin and ?quite expensive (unless you've got some old stuff you want to upcycle?). The mancave is not spider proof and I think this would be quite impossible to remedy - sorry! Lol. Best wishes, Des
@VColossalV4 жыл бұрын
Using 12mm underlay here... won the little dents the staples cause make the finish uneven?
@21stcenturycaveman334 жыл бұрын
Hithere. Absolutely no problems thus far. It'll be fine providing you don't whack in 1000'2 of the things. ATB, Des
@nathane74294 жыл бұрын
How wide is it
@Jessebella13 жыл бұрын
Moved to Germany, you will not believe it here lol. I bought my carpets and then headed out to look for underlay, they have never heard of it and said how silly the thought was as carpets do not need underlay, I tried to explain why its better and they do but they have none of it lol.. I cant find the stuff anywhere. They dont have skirting boards either but instead run the carpet up the wall to about the height our skirting boards in uk are and then stick the carpet to a plastic skirting board type thing that then holds the carpet. Got that done although not happy with no underlay and hate no skirtings, anyway proceeded with painting last week and guess what, never heard of undercoat, asked me what the point in it is and this is at major diy stores lol. I have been here a couple of years now but still am astonished daily at things lol I live in hope of finding underlay here so I dont need to pay horrific postages from far away but im not going to hold my breath!
@21stcenturycaveman333 жыл бұрын
Hi there. What a wonderful story. Thanks for sharing. The next thing they'll be telling you is they've never heard of any "irregularities" when testing carbon dioxide emissions in VW's?? Appreciate the story and thanks very much. Best wishes, Des
@Jesusandbible5 жыл бұрын
My friend said newspaper is better than no underlay at all. Is that true? What are the benefits? I hate walking on really bouncy carpet because of bounciness caused by underlay also, and my doors are not high enough for it.
@21stcenturycaveman335 жыл бұрын
Hi there. Unfortunately, as I am only a DIY carpet fitter I can't comment on the merits of simply using newspaper as opposed to underlay. Probably best to just ask your friend why? Many folk have to cut down their doors to accommodate new carpets and underlay so it's not that uncommon my friend. Sorry I can't help more than that. Take care, Des
@dlong203152 жыл бұрын
Think you’ve done a really good job you’ve actually inspired me only l have concrete floor🙄
@21stcenturycaveman332 жыл бұрын
Great feedback. Thanks for watching my vids. Thanks, Des
@y.y.38884 жыл бұрын
Please from where did you buy the underlay?
@21stcenturycaveman334 жыл бұрын
Here we go ... www.onlinecarpets.co.uk/accessories/carpet-underlay/thickness/8mm-10mm/10mm-thick-carpet-underlay.html
@Standoff4135 жыл бұрын
Gd job just the way I do it
@21stcenturycaveman335 жыл бұрын
Thank you buddy. Not perfect but not cr@p either. ATB, Des
@Standoff4135 жыл бұрын
Does the job that’s the main thing. But the main aspect behind it is helping ppl doing the best job u can do.
@Rycka94 жыл бұрын
do you rip off the plastic from one of sides? or leave it to wear in ??? it looks like protection
@21stcenturycaveman334 жыл бұрын
Sorry but I'm not sure what you mean. Other than the plastic sheet that it's wrapped in from the supplier there's nothing else to remove. ATB, Des
@Rycka94 жыл бұрын
@@21stcenturycaveman33 my is pink from both sides kind of plastic and one of sides looks like should be on and other is pealable
@dmgsoultogetherness66673 жыл бұрын
How do i secure the underlay if i dont have a staple gun...thanks
@21stcenturycaveman333 жыл бұрын
Hi ythere. You could always glue it down using a strong spray adhesive - that's what I would do. Make sure the room is well ventilated though. ATB, Des
@Fac323JQ3 жыл бұрын
Ebay £12 inc staples
@FirebrandVOCALS4 жыл бұрын
what type of Stapler was that you were using?
@21stcenturycaveman334 жыл бұрын
www.amazon.co.uk/Tacwise-A11-Type-Hammer-Tacker/dp/B003OWR2HA/ref=sr_1_7?dchild=1&keywords=tacklife+carpet+stapler&qid=1591523082&sr=8-7 Stay safe and well, Des
@alibeautiful53103 жыл бұрын
Hi. From Where did u bought 10mm Underlayer 50 square meter of £35. Can u please send me buying link. Many thanks sir.
@21stcenturycaveman333 жыл бұрын
Hello there and thanks for watching. This video is 4 or 5 yrs old so prices will probably have changed in that time. I would suggest simply searching on the internet and compare products + prices. Best wishes, Des
@hardworker80307 жыл бұрын
Hi. Can you remember what colour paint you used.
@21stcenturycaveman337 жыл бұрын
Yes sure. It was Soft Coffee (Matt) from B and Q. ATB, Des
@hardworker80307 жыл бұрын
Thank you.
@magyaradam8957 Жыл бұрын
Hi why so many staples for the underlay?
@21stcenturycaveman33 Жыл бұрын
Hi there. There are probably too manystaples tbh and you could get away with a lot less. That said, it's still looking great and performing well so no detriment whatsoever. Best wishes, Des
@harikrishnanvr3 жыл бұрын
Hi is that Nail or stapler you used ? sorry for basic questions
@21stcenturycaveman333 жыл бұрын
Stapler my friend - no nails. Des
@harikrishnanvr3 жыл бұрын
@@21stcenturycaveman33 thanks. Your video gives me confidence to try this. I will try this . Appreciate the effort and you did a great job there
@Polecat549414 жыл бұрын
Great job on the Underlay but there are a lot of tradesman that post on utube as well to share their secrets so not all bad :)
@21stcenturycaveman334 жыл бұрын
Fair comment. That much is true. Best wishes, Des
@JagoffCitizen20 күн бұрын
I've seen a supposed professional on KZbin leave a bloody great bubble in a doorway!
@2icelollys1goat Жыл бұрын
You're absolutely right about tradesmen being twats and giving online abuse to DIYers who don't want to be ripped off by them.
@zedman4428 жыл бұрын
Nice work, would be interesting to see the different views on what side the underlay goes. Also when prepping a room I like to install some 3mm hardboard down just to even out any bumps etc. with hard board the rough side always goes on the top side.for me personally even though I will do the odd bit of carpet fitting in small areas for a house finish I will get the pros in, they can do it very quickly and pretty cheap. I think I paid £30 for a room, they did it in 20 minutes. I did however prep the room with underlay and gripper though. It's really not worth my time. It's the only thing I will pay someone to do. i get my satisfaction in completing a rebuild from the bottom up take my hand to most things including mechanics. Been like that ever since I can remember. being in the trade though I notice you don't really get many that actually take pride in their job. They are not in it for the passion but because it pays the bills.
@21stcenturycaveman338 жыл бұрын
+Zed Man Thanks ZM, hope all is well with you. I've had some great feedback on this video. Apparently I laid the underlay the wrong way up which was interesting because no-one mentioned it in the previous video I made in the lounge. I would also do the same with hardboard or ply if the floor was v. rough. As you say, you've got to weigh up whether it is cost effective to do it yourself or get someone in. Sometimes it does pay to get someone else to do a job depending on your own circumstances and earnings potential. Having good old fashioned pride in your work does seem to be becoming a thing of the past for sure. Have a good day my friend.
@martynlloyd-harris15138 жыл бұрын
+21centurycaveman Hi again, I thought I would pop by and let you know the reason(s) why the underlay is clearly laid upside down. When PU underlay is manufactured they put a flat finished surface on one side and leave the other natural (the rough side). In carpet fitting it's always rough side down, smooth side up. One of the reasons that the smooth 'finished' side is up is that when the carpet is fitted and you are walking on it, the backing (usually hessian/action/secondary) still moves about a little and because it's finished side up this will not 'grate' against the underlay. If the underlay is fitted rough side up this constant 'grating' movement may cause the underlay to prematurely delaminate. Another simple reason, it is easier to cut on the smooth finished side. Hope that answers your question. Kindest regards.
@21stcenturycaveman338 жыл бұрын
+Martyn Lloyd-Harris Good morning and thanks again for your helpful comments and explanations. The video may not have been clear but I did actually lay the underlay rough side down on the floor and finished side up facing the carpet. ATB
@21stcenturycaveman338 жыл бұрын
+Martyn Lloyd-Harris At least, the rough side was what I thought I laid on the floor as it didn't appear to be finished, unlike the top surface which had some sort of netting / covering on it????
@floppychicken686 жыл бұрын
Not quite sure why all these supposed pro's think that you installed the carpet underlay upside-down. The top Smooth Finish is a 'breathable barrier' and NEEDS to be installed closest to the carpet. This aids in keeping spills and moisture out of the bulk of the underlay and instead leaves it in the carpet so that cleaning is much easier, thus keeping stains closer to the carpet surface. Keeping the moisture barrier toward the carpet ALSO helps keep the rug cleaning machine water out of the underlay and instead between the bottom of the rug and the stain where it should be... The shiny side also aids in sliding the carpet around when installing without pulling and kicking up the underlay. If any PRO doesn't know that, then they shouldn't be giving you advice and they probably should be worried about warranty issues down the road..LOL. Regards and good job :)
@dc1107703 жыл бұрын
I see you didn’t got lining paper, any reason why not?
@s7productions8767 ай бұрын
Not required :)
@feliciadwamena62055 жыл бұрын
Please where can l get the underlay for £35
@21stcenturycaveman335 жыл бұрын
Hi there. I purchased mine from here but price has increased in past 2 years: www.onlinecarpets.co.uk/accessories/carpet-underlay/thickness/8mm-10mm/10mm-thick-carpet-underlay.html
@sheryleegolds1465 жыл бұрын
i just bought 15m2, 10mm from ebay for £34
@Devghost4 жыл бұрын
I bought 15m2 super 10mm underlay for £29 from carpet Underlay shop .
@emsl39333 жыл бұрын
Thank you, really helpful!
@21stcenturycaveman333 жыл бұрын
You're welcome! Des
@swagon45454 жыл бұрын
Canny job 👍
@21stcenturycaveman334 жыл бұрын
Thank you. Des
@ultra_niueanz94137 жыл бұрын
As a Carpet Layer you're good at fitting but please hammer staple the edges of the underlay cause I hate scraping floors
@21stcenturycaveman337 жыл бұрын
Lol. Point well made Sir! Thanks for watching. Take care, Des
@tadjer3332 жыл бұрын
No felt paper down first??
@s7productions8767 ай бұрын
not even remotely required lol :)
@HoudalothAli5 жыл бұрын
You can take the radiator off. It's not hard.
@s7productions8767 ай бұрын
As a carpet fitter I applaud you're effort👍. to be helpful for the future, had you put your hammer on its side and made sure the nails weren't through the gripper yet then you'd have been able to hit it in under the radiator, if it was still to close use then end of the fitting feather I presume you use in part two on the end of a nail and hit it down with a mallet or hammer :) well done otherwise. I could poke out holes all over the video where you've done things wrong but honestly so long as the carpet is still treating you fine and your happy with the result who gives a crap. good on ya mate. Also you're comment about jealousy was more amusing than anything because its probably painters that care most lol. p.s get some feckin scissors man, lol. you are just making life difficult for yourself ✌👍
@21stcenturycaveman337 ай бұрын
Hi there and thanks so much for your supportive feedback. I agree entirely that it may not have been the perfect way to fit the underlay and carpet but do you know what? It's still down and perfectly fine (apart from where one of our cats has pulled up a corner in the room hunting a spider or something). Thanks very much for taking the time to watch and for your c0nstructive feedback. Best wishes, Des
@leahphilpott98923 жыл бұрын
From my partner...sometimes aye love a Pom. From another Pom 🤓
@21stcenturycaveman333 жыл бұрын
Love it!! Best wishes, Des
@Ricky-km7hy3 жыл бұрын
Hi I looked on the website . Its now £60 for that
@21stcenturycaveman333 жыл бұрын
Yikes. Time to look elsewhere. Des
@Fac323JQ3 жыл бұрын
Saved over £400 fitting grippers and underlay myself compared to Carpet right......Carpet next....stapler of ebay £12 inc 3000 staples....also cheaper than rip off Amazon
@21stcenturycaveman333 жыл бұрын
Schmicko! That's the way to do it buddy. Well done for having the guts to have a go. Congrats! Des
@remusmitrica92484 жыл бұрын
It took me 5 min to do What he done very slow..😂😂😂
@21stcenturycaveman334 жыл бұрын
Hey Remus, you da man!!! I was so impressed with your obvious confidence in your skill and expertise that I went straight to your channel to learn as much as I could from you. What a disappointment to find - 'This channel doesn't have any content' 😂😂😂😂😂😂
@remusmitrica92484 жыл бұрын
21st Century Caveman anyway
@babfar7 жыл бұрын
waste lots of staples ,thats crazy ,,plz dont
@21stcenturycaveman337 жыл бұрын
Hello there and thanks for taking the time to watch the video and comment. Feedback does indeed suggest that I was over zealous with the staples and perhaps I did use more than needed. But hey, it least its not gonna move any time soon!. Take care and best wishes, Des
@cwsing72304 жыл бұрын
No underlay in this brand new house name Furness wood, shame on the mean builder, because of that, it feels like a hurdle of elephant walking upstairs when my daughter walks on the carpet in her bedroom
@21stcenturycaveman334 жыл бұрын
Hiya buddy. I've never bought a new house because of numerous quality issues I've read and heard about but even I'm gob-smacked to hear that there's no underlay. Having said that, I believe some carpets may have their own underlay? Not sure how good they are thoiugh. Best wishes, Des
@tredogzs7 ай бұрын
I do ALL my electrical and gas! Trades dont care... you can do a far better job yourself.
@ryantillo18896 жыл бұрын
Haha I’m 14 and I could do a better job than that
@21stcenturycaveman336 жыл бұрын
Now we both know that's not true don't we? Go and do your homework .... lol
@ryantillo18896 жыл бұрын
21st Century Caveman actually I have mastered the trade, I have been doing this trade since I was 7, I work with my dad and I enjoy it a lot. You would be surprised with what I can really do but I don’t want to make you jealous,,, because I am Much BETTER than you!!!