DIY Foldable Table Tennis

How to create a Foldable Table Tennis
Music Used:
Cloud ( Prod. by Lukrembo) | / cloud
LAKEY INSPIRED - Days Like These | / days-like-these
LAKEY INSPIRED -Chill Day | / chill-day
Ghostrifter - Midnight Stroll |
ghostrifteroff...
Ghostrifter -Morning Routine | ghostrifteroff...
Ghostrifter - Afternoon Nap |
ghostrifteroff...
Bad Snacks - Take It Easy | www.youtube.co...
Music Credit: STEESH
Track Name: "The Feelings"
Music By: STEESH @ / steeshhaggie
Official "STEESH" KZbin Channel HERE - www.youtube.co....

[@tinamoran8270]

comments lang... 1. dapat "flat" paint ang ginamit at hindi glossy para may kapit ang bola at hindi nakaka silaw sa araw,(2.) hindi na dapat folding kasi napaka bigat at malamang hindi tatagal ang mga bisagra at bibigay agad ito, better kung magkahiwalay na lang yung 2 pcs, mas magaan iporma pag may laro o bubuhatin.i design mo nalang ng may parang brace sa ilalim (3.) hindi na need ang lock sa 2 pcs at sa bigat nito ay hindi na ito makakagalaw pa (4.) at ang pinaka mahalaga, ay gumastos at naabala ka na nga ay sana minimum of 3/4 plywood na ang ginamit mo, mahina at bamban ang talbog ng bola sa 1/2 na plywood...yun lang, but overall nice try..

[@woodzandbladez9780]

Salamat bro, huli na din nung naisip ko na flat ang paint, but still kumakapit naman ang bola kahit pano 😉 As per design naman, yan kasi pinagawa ni neighbor, but you have a point, mabigat nga sya. Salamat sa inputs 😉

[@tinamoran8270]

@@woodzandbladez9780 pag nakita ng nagpagawa yung deficiencies ng design nya malamang ipa modify nya yan sa iyo, yun kasing ginawa kong TT table 35yrs ago ay separate lahat, 2 pcs 5x9 tables, 2 pcs stands at 2 pcs braces, noon kasi naka bili ako ng 5ft x 10ft na 18mm marine plywood sa lumber sa EDSA QC kaya buo akong nakagawa ng mesa, walang dugtong, now puro 4x8 lang ang mga plywood kaya need talaga lagyan ng attached braces sa likod kaya lalo bumibigat. Up to now existing pa mga mesa ko (baka i refinish ko na lang pag sinipag, hehe), yun lang mga stands ang nabulok na kaya baka palitan ko ng steel ones, ty

[@kathpu]

Ang galing ng walkthrough! Galing! Very informational :)

[@woodzandbladez9780]

Thanks Kath, will do better on my next project 😉

[@jovenalcantara7819]

Sir! Thank you. Ito po talaga yung hinahanap ko na DIY video tutorial. I think it's better po if you're using a 3/4 thickness plywood kasi iba talaga ang bounce sa bola kapag half inch compared to a 3/4 inch thickness pero overall... Very Nice!

[@woodzandbladez9780]

Yup you are right, but the owner opted for the cheaper one thats why 1/2 plywood ginamit namin. Thanks a lot sir 😉

[@woodzandbladez9780]

Pa-Subscribe na din sir if its not to much to ask 😉

[@christianjaycorpuz885]

Underrated vids po. Sana more vids po

[@woodzandbladez9780]

Thank you, medyo naging busy on other things, but i have one coming up, im almost done na with the project 😉

[@leonorasison3764]

Ang gaganda ng mga tools ha. Nice tutorial !!

[@woodzandbladez9780]

Thanks Gay, hehe may sermon ni misis yang mga yan hahahha

[@richmondreyes1672]

Ang galing po! Makaka gawa narin ako ng table ko haha thank you po!

[@woodzandbladez9780]

Salamat bro. Kayang kaya mo yan, puro straight cut lang naman yan 😉

[@vincenicolaserfe4916]

continue sharing your ideas Sir! maraming salamat po!! pawer po sa inyo!

[@woodzandbladez9780]

Thanks din sir, will create more video pa 😉

[@elsiebuenaventura6254]

Wow! Galing!👏

[@woodzandbladez9780]

Thanks thanks 😉

[@geronimoalquizalas3661]

Ang ganda ng pagka gawa subalit yong stand paano gagawin yon? Salamat

[@woodzandbladez9780]

For this table, ipapatong lang sya sa table as requested by the client… you can have a folding legs for it if you want ☺️

[@annaoldschooler7477]

Galing nyo kuya.

[@woodzandbladez9780]

Salamat po 😉

[@nanoworx]

Nice sir.

[@woodzandbladez9780]

Thank you 😉

[@kaikai9739]

mali po ata pentura gamit nyo dapat hndi glossy, chalkboard na paint dapat. nadudulas kc bola sa glossy at hnd full effect ang mga spin and talbog.

[@woodzandbladez9780]

Hindi naman sya sobrang glossy sir and maayos naman talbog ng Bola.. Anyway, thanks for the tips, noted yan next time na gagawa ulit ako since first diy project ko sya 😉

[@18kheizz]

Go sir rey 👌👌👌

[@woodzandbladez9780]

Thanks KZ 😉

[@angelomagno6225]

Like a pro!

[@woodzandbladez9780]

Naks!

[@keionMiochan21]

Thank you po for this video 💕 I'm currently asking my Papa na gawan ako po ko ng pingpong table.

[@woodzandbladez9780]

Thanks. Im sure kayang kaya ni papa mo yan 😉

[@renzorendon3218]

Nice video sir

[@woodzandbladez9780]

Thank you 😉

[@renzorendon3218]

Maganda po ba talbog ng bola Review po ng bounce thanks sir

[@woodzandbladez9780]

@@renzorendon3218 yes, maayos naman ang talbog at kumakapit naman ang pektus, pero i think its better if rubberized paint gagamitin, but i haven't tried it yet..

[@allboutDadjj0322]

Nagulat ako channel mo pala ito brad! Parehas pala tayo ng hobby ha! Plan ko gumawa ng table tennis para sa kiddos ko kaya check ko size ng table. Nag subscribe nako ha.

[@woodzandbladez9780]

Hahaha sumubok lang mag vlog brad, ikaw din dami mo na video, nag subscribe na din ako at notif bell sa channel mo 😉

[@faheemrobin9999]

Is it available in Quetta coty

[@faheemrobin9999]

I want to buy is ot available on line

[@mikhailramos8682]

nice video sir! balak ko gayahin kasi im into table tennis but i dont have space so papatong ko lang po sa existing table. ask ko lang po kung kakasya dalawang table sa 3pcs na 8 x 4ft na marine plywood. thanks po!

[@woodzandbladez9780]

I think kasya sya bro 😉

[@alchuborromeo7897]

Pag nagawa nyo po mag practice game din kayu para makita kung anu yung pwede i improve.

[@woodzandbladez9780]

Thank thanks 😉

[@harrismora1410]

Nice guide sir love it more vids please 🙏 Question lang hm estimated cost ng build na to ??

[@woodzandbladez9780]

Thank you bro. Estimated cost is more than 6k 😉

[@juanpaulosantos8743]

@@woodzandbladez9780 mahal din pala, paano kung yung stand is metal works pa, tsk tsk, plan ko pa naman gumawa at mag benta.

[@woodzandbladez9780]

Yes, mahal din kasi plywood and other materials... Pwede metal, yung tubular na 3/4 cguro will do..

[@geofilmahinay7729]

Sir,Ganda Ng pgkagawa nyo sir...ask lang Po sir ilan ngastos mo?.God bless Po...salamat

[@woodzandbladez9780]

Umabot din ng 6k plus bro..

[@rhenspaulpaguia57]

Mag kano po budget nyo?? Or mag kano po lahat ng nagastos nyo??

[@woodzandbladez9780]

Unabot din ako ng 6k

[@edithaeclarinal6725]

Boss pano yung pinag patungan? Gagawa ksi kmi boss table boss eh

[@Nandaem]

Awesome ! Which paint you used ?

[@woodzandbladez9780]

Thank you. I used Quick Drying Enamel.. I suggest you use any water-based matte finished paints, it dries faster than QDE.

[@r.raksha]

Total cost?

[@woodzandbladez9780]

Hi Raksha, it cost me around 7,000 Philippine peso on materials.

[@jalanibagumbaran7438]

Pwde makita itsura or design ng paa nya?

[@ransplay9536]

Paano naman po pinturahan pag phenolic board ang ginamit?

[@woodzandbladez9780]

If phenolic, same pa rin halos, need to apply primer before painting..

[@kithslither126]

Nice! Napasearch ako ng DIY. Kasi sarap na mag pingpong. Hahaha pero ako lang ba nakapansin na di nya nqgamit yung mga gloves, mask and headgear? Hehe

[@woodzandbladez9780]

Thanks bro, nagamit ko naman, kaso di nasama sa video pag suot ko hahaha init din kasi kaya tinatanggal ko from time to time 😂

[@kithslither126]

@@woodzandbladez9780 😂

[@gloriadingle3795]

Ayan nalike and subscribe ko na Keep it up!

[@woodzandbladez9780]

Thanks thanks 😉

[@geneleonardgundayajurial7526]

Pwede kayang i pocket hole nalang sir para wala tagang screws sa taas?

[@woodzandbladez9780]

Pwede naman, wala pa kasi ako proper tools that time for pocket holes

[@marikheitRomlasa]

Pwede po bang gumamit ng epoxy paint instead of primer paint?salamat po

[@woodzandbladez9780]

Medyo madulas ang epoxy paint, baka hindi kumapit ang bola… better if medyo rubber type na paints ang gagamitin, latex paints will do justice na din

[@jay-elgaming5522]

How much po lahat ng materials yung nagamit niyo po dito? Thank you!

[@woodzandbladez9780]

If i remember it right, more than 6k din.

[@jay-elgaming5522]

@@woodzandbladez9780 appreciate the response sir! Thank you! :)

[@adriantabora3565]

Magkano po nagastos niyo dito? Lahat lahat

[@edgarsrooftopgardentours5927]

Walang stand ng table.sir?

[@woodzandbladez9780]

No stand or table feet sir, as per my neighbor's instruction coz they will just put it on top of their old table na lang daw, para tipid din sa materials 😉

[@aiakamille5558]

Hi, paano po yung stand?

[@woodzandbladez9780]

Hi Aia, it will be placed on top of an old table sabi ng nagpagawa, thats why he instructed me not to put stand/table feet.. Para makatipid din sa materials 😉

[@aiakamille5558]

Thank you po. 😁

[@allboutDadjj0322]

Oo nga pala, di ka naka mask nung nag sanding ka. Heheheh

[@woodzandbladez9780]

Hahaha oo nga e, nakalimutan na ka mamadali, kasi mukhang uulan na nung time na yan 😂

[@kekhriesilieusou696]

I like your effort and content but try to keep it short and introduction part was to long

[@woodzandbladez9780]

I noticed that too. Thanks for the tips 😉

[@olezaj]

Sir ask ko lang po magkano po kaya estimate nyo sa "labor cost" kung ipapagawa ko po ito sa carpenter?

[@woodzandbladez9780]

Baka nasa 3k ang labor cost sir, depende sa carpenter. Usually minimum na labor is half the price of the materials, or sa iba naman is number of days nila gagawin...

[@carlottavidal5505]

Pa gawa naman kami

[@woodzandbladez9780]

I would love to... Kaso medyo busy po ngayon sa work, di ko po maiisingit 😉

[@maling1720]

Magkano po nagastos ninyo for the materials?

[@koshineko4431]

Total cost po ng mga kahoy?

[@woodzandbladez9780]

Umabot din ng 6k plus

[@koshineko4431]

@@woodzandbladez9780 so parang mas maganda na lng po bumili ng table tennis online

[@woodzandbladez9780]

@@koshineko4431 the cheapest i saw online is around 9k to 12k, hindi lang ako sure sa quality nun... But its up to you. For a DIYer like me, iba pa din ang fulfilment kapag sariling gawa mo no matter how much it will cost you 😉

[@johnpaulybanezpaquibot1712]

@@woodzandbladez9780 use MDF sir or even HDF

[@woodzandbladez9780]

Will try that next time bro, thanks 😉

[@GibiRN]

Sir San pinatong ung table?

[@woodzandbladez9780]

Sa table lang din nila 😅

[@GibiRN]

@@woodzandbladez9780 pede.nga , nice idea.. ung parang folding table na plastic, basta stable :)

[@janneferhernandez7632]

Magkano po lahat ng nagastos sa pag papagawa?

[@woodzandbladez9780]

Ay sa table Tennis pala to, inabot din po ng 7K plus yung materyales na ginamit..

[@harveygranadozin6058]

Magkano po nagastos nyo

[@woodzandbladez9780]

More than 6k din bro 😉

[@harveygranadozin6058]

@@woodzandbladez9780 salamat po.

[@underatedmember9748]

roses are red violets are blue the titles in english why arent you?

[@woodzandbladez9780]

Hi Abdirahman, thank you for watching my video. Im a Filipino, thats why I used our language in this video. I'll Incorporate english in some of my future projects so more people can understand 😉

[@tropicalgetaway]

@@woodzandbladez9780 I think its good that you used your native language. It's very hard to be bilingual and unfortunately us English speakers are sometimes too arrogant to learn another language. Much respect for sharing your skills.

[@woodzandbladez9780]

This is noted guys, im sorry about that. I'll do better on ny videos in the future. Thanks a lot 😉

[@tropicalgetaway]

@@woodzandbladez9780 nothing to be sorry about. You did great.

[@woodzandbladez9780]

Thanks 😉