DIY Ghostbusters Neutrona Wand/Proton Thrower From Mostly Easy To Find Materials😁 With Template!

  Рет қаралды 54,995

Lost Wax

Lost Wax

Күн бұрын

Пікірлер
@OdinMakes
@OdinMakes 2 жыл бұрын
Awesome video! I really liked the nail wrapped with sandpaper, and the candle lathe. Thank you!
@LostWax
@LostWax 2 жыл бұрын
Thanks Odin! Yes, those are both old tricks from back when I used to make jewellery, super handy.
@deeznuts23yearsago
@deeznuts23yearsago 2 жыл бұрын
I guess we are gonna see a candle lathe soon in a month
@AmmonMurphy
@AmmonMurphy 2 жыл бұрын
I’ve seen many MANY foam packs and wands. This is by far the best for sure. Keep up the great work!
@LostWax
@LostWax 2 жыл бұрын
Wow, what a compliment, thank you very much!
@Titanicprojectmc.
@Titanicprojectmc. 2 жыл бұрын
Yo dude you commented on my proton pack video! Thanks!!
@gustavishmichelle3575
@gustavishmichelle3575 2 жыл бұрын
I genuinely could wait forever if I had to for another one of your vids. They never miss and its always a joy to see you again! This wand looks incredible, dude! Definitely trying some of these techniques for my future ghostbuster builds 🤩
@LostWax
@LostWax 2 жыл бұрын
Awww, how kind🙂 Thanks for being so patient, It seems every single thing I do takes waaaay longer than I expect.
@darklordofsword
@darklordofsword 2 жыл бұрын
I think that wax lathe and caulk mold making technique is the single most useful technique I've seen on any prop channel in a while. Thanks! I'm gonna have to try that.
@LostWax
@LostWax 2 жыл бұрын
That's so good to hear! I used to make jewellery and used the wax lathing technique all the time. It's such a satisfying activity, almost mesmerizing....
@quinbee_creates
@quinbee_creates 2 жыл бұрын
There are lots of other silicone mold making vids around but the two other most important points are to use 100% silicone caulk (one with additives may or may not work out) and do it outside or with good ventilation, because it off-gasses eye-wateringly strong vinegar fumes.
@LostWax
@LostWax 2 жыл бұрын
@@quinbee_creates Great points!
@Zeaiclies
@Zeaiclies 2 ай бұрын
It's rumored the four stunt packs for '84 were made very similarly to this. Fantastic
@mflabkanonier
@mflabkanonier 2 жыл бұрын
I'm building Protonpacks for cosplayers, fans and myself for a while now and i must say: the way you created the Clippard and the top knob is just genius..!
@LostWax
@LostWax 2 жыл бұрын
Thank you for appreciating those bits:) I really struggled to find a reasonably good way to make the knob, that wasn't too expensive or out of reach for most.
@robf8023
@robf8023 2 жыл бұрын
I literally just asked for this last night!!! I’m just about done with the pack!
@LostWax
@LostWax 2 жыл бұрын
Nice, I hope it's turning out well for you!
@coreyg2177
@coreyg2177 2 жыл бұрын
You're a damn genius! Thank you for sharing and putting it out for us to use for free! It looks beautiful.
@LostWax
@LostWax 2 жыл бұрын
You're welcome, thanks for watching!
@Tripswitch1000
@Tripswitch1000 2 жыл бұрын
So glad to see another video from you and looking forward to part 2 next week! You make amazing items every single time!
@LostWax
@LostWax 2 жыл бұрын
Thank you so much!
@JamieHall2008
@JamieHall2008 2 жыл бұрын
I am absolutely blown away by your videos, Chris. They're fantastically entertaining to watch and the results always look amazing. Thank you!
@LostWax
@LostWax 2 жыл бұрын
Wow, thank you!
@jonogunn
@jonogunn 2 жыл бұрын
You did it! You son of a gun did it! Honestly I didn’t think you might have been able to pull the wand off after seeing your pack build. You’re technique is genius especially the hand grips and the patterned knob.
@LostWax
@LostWax 2 жыл бұрын
Yeah, I wasn't sure how it would turn out either, but I'mm really happy with it!
@negotiableaffections
@negotiableaffections 2 жыл бұрын
Ingenius - I particularly liked the handgrip construction, and the faux knurling.
@LostWax
@LostWax 2 жыл бұрын
Thanks, I was pretty proud when I figured those out:)
@frankcabacungan8421
@frankcabacungan8421 2 жыл бұрын
STUNNING. You’re craftsmanship is just breathtakingly brilliant.
@LostWax
@LostWax 2 жыл бұрын
Thank you very much!
@ivantheterrible2796
@ivantheterrible2796 2 жыл бұрын
Awesome stuff. Looking forward to the second half. Thank You for your time and effort on this channel.
@LostWax
@LostWax 2 жыл бұрын
My pleasure! Thanks for watching and commenting!
@quinbee_creates
@quinbee_creates 2 жыл бұрын
So thorough, so detailed, and so many clever tips.
@LostWax
@LostWax 2 жыл бұрын
Glad it was helpful!
@berniedavis6676
@berniedavis6676 2 жыл бұрын
fantastic video. I can't wait to see part2. most of the names of the parts of both the wand and proton pack were given by the fans. that particle thrower looks magnificent.
@LostWax
@LostWax 2 жыл бұрын
Thanks!
@kimberlyking3083
@kimberlyking3083 2 жыл бұрын
Your attention to detail is wonderful. I love your designs.
@LostWax
@LostWax 2 жыл бұрын
Thank you so much!
@patrickkavanagh7371
@patrickkavanagh7371 2 жыл бұрын
Been waiting for this tutorial..love it dude. Always finding incredible ways to make all these parts. I'm always thinking there's no way he's going to not buy that piece, then you bang it out from home. It's such a peculiar prop with odd shops yet you still hit the accuracy for a scratch build.
@LostWax
@LostWax 2 жыл бұрын
You are sure right about it being a peculiar prop with odd shapes. When I first started I thought it would be an easy build, but it's definitely got some tricky bits:)
@ScytherDracon
@ScytherDracon 2 жыл бұрын
A Ghost Trap and/or A P.K.E. Meteor would be awesome for the next Ghostbusters build. I would love to know how you come up with the design for the build, a lot of research must be involved with each design.
@LostWax
@LostWax 2 жыл бұрын
Hmmm, I think I'm gonna so something not Ghostbusters next, but maybe sometime down the road if I get enough requests. And yep, I do quite a bit of research, and it involves a lot of trial and error as well:)
@mgbrowning
@mgbrowning 4 ай бұрын
@@LostWax, yes, please, a P.K.E. meter and a Ghost Trap!!
@coreypierce
@coreypierce 2 жыл бұрын
Very nice! You did somethings here that I hadn't thought of. Anxious to see the next video.
@LostWax
@LostWax 2 жыл бұрын
Coming on Saturday. I just finished editing, so it's definitely gonna be done!
@thadscott6167
@thadscott6167 2 жыл бұрын
I am so excited to get started on this!! Amazing work as always. I am just about done with my foam pack so this pattern and video came just in time.
@LostWax
@LostWax 2 жыл бұрын
Perfect!
@OldSkoolSP
@OldSkoolSP Жыл бұрын
I bought your templates/instructions for my brother's Halloween build. Very impressed! Outstanding detail but easy to follow. Now if we can just get better at cutting the foam straight... :D
@LostWax
@LostWax Жыл бұрын
Glad to hear it was helpful! As for cutting foam, it'll come with practice.
@Scottpie47
@Scottpie47 2 жыл бұрын
YES!! The project is complete! Now if anyone ever asks you if you're a god, you can say (with confidence), "YES!!" ❤❤❤ Srsly tho, thank you for the entire proton pack project!
@LostWax
@LostWax 2 жыл бұрын
😂 I'm not so sure about that, but you are very welcome!
@theoddalien
@theoddalien 2 жыл бұрын
Just finished making the first part of the neutrona wand and it looks amazing thanks for showing us how to make such stunning master piece!
@LostWax
@LostWax 2 жыл бұрын
Wow, that was super fast!! Glad it's working out!
@carldagroundskeeper
@carldagroundskeeper 2 жыл бұрын
Awesome! Thanks so much for making these patterns and posting the how-to videos!
@LostWax
@LostWax 2 жыл бұрын
You are so welcome!
@scratchcrafter
@scratchcrafter 11 ай бұрын
This is rad, would love to see the Rocketeer jet pack build!!!!!!!!!
@craigmushens4789
@craigmushens4789 2 жыл бұрын
Learned some cool techniques in this video. Thanks. Great work as always!
@JacobHGamez
@JacobHGamez 2 жыл бұрын
Awesome!!!! I love the videos! Next could you make a ghost trap?
@LostWax
@LostWax 2 жыл бұрын
I'm not sure if I'll get around to a ghost traps any time soon, I've got a lot of other projects on my list:)
@JacobHGamez
@JacobHGamez 2 жыл бұрын
@@LostWax cool!
@MsBs-ws3yb
@MsBs-ws3yb 2 жыл бұрын
love it so good to see you again
@NGOODYHERE100
@NGOODYHERE100 2 жыл бұрын
Another great make! Thankyou. Can’t wait to get started. Keep them comingz
@LostWax
@LostWax 2 жыл бұрын
Thank you! Will do!
@samburns3114
@samburns3114 2 жыл бұрын
IVE BEEN WAITING FOR THIS THANK YOU!!!
@LostWax
@LostWax 2 жыл бұрын
Sure thing!
@karisorrenti
@karisorrenti 2 жыл бұрын
As you promised! And i have been waiting for this day when this vid comes out. Thanks.
@LostWax
@LostWax 2 жыл бұрын
You're welcome, thanks for waiting!
@3rd_Tower
@3rd_Tower 2 жыл бұрын
Thanks so much! I can finally finish the proton pack
@LostWax
@LostWax 2 жыл бұрын
You're welcome! Have fun!
@chrissyb3375
@chrissyb3375 2 жыл бұрын
So it begins! Starting this today and hoping to have it done by Halloween. Thanks!
@LostWax
@LostWax 2 жыл бұрын
Have fun!
@jerryriggedpuppets2189
@jerryriggedpuppets2189 2 жыл бұрын
I’m so excited to start on this build!!
@rolandblais
@rolandblais 2 жыл бұрын
Thank you so much!!!
@LostWax
@LostWax 2 жыл бұрын
You're welcome!
@scott80
@scott80 2 жыл бұрын
Thank you so much, awesome work and great video. Can't wait for part 2.
@LostWax
@LostWax 2 жыл бұрын
You're welcome, thanks for watching!
@traciakierman1
@traciakierman1 2 жыл бұрын
As usual, fantastic video! Can't wait for the next one!
@LostWax
@LostWax 2 жыл бұрын
Thanks so much!
@fabienlelaurin7760
@fabienlelaurin7760 2 жыл бұрын
Awesome job man !
@LostWax
@LostWax 2 жыл бұрын
Thank you! Cheers!
@georgegollop6779
@georgegollop6779 2 жыл бұрын
Thank you sooo much for making this it looks so good
@LostWax
@LostWax 2 жыл бұрын
I'm glad you like it
@andrewdcleft
@andrewdcleft 2 жыл бұрын
This is gold
@thedarkknight803able
@thedarkknight803able 2 жыл бұрын
Awesome build.
@JGDeRuvo
@JGDeRuvo 2 жыл бұрын
You really need to get into using contact cement. But the gnarled knob technique is genius.
@LostWax
@LostWax 2 жыл бұрын
Yeah, I have used contact cement in the past, but I have trouble recommending to people when I know there is a good chance they won't use proper respiratory protection. My son was diagnosed with leukaemia when he was 6 and I don't want anyone else to have to go through that nightmare. So even though it takes a bit longer, I'd rather use something less toxic. Once I got used to it, I actually quite liked using hot glue, it does have some advantages contact cement doesn't.
@lewiscausey687
@lewiscausey687 2 жыл бұрын
Love the foam vids!!! Have you considered building a housing from 1/4 luan or hobby Store wood to create a sturdy base in housing to make either twist handle or green side trigger and add rumble motor?
@LostWax
@LostWax 2 жыл бұрын
No I haven't thought about that, but it sounds like an interesting idea....
@spacemansabs
@spacemansabs Жыл бұрын
silicone reacts with latex gloves, so remember to use nitrile ones if you're going to use your hands
@richardpaul2241
@richardpaul2241 2 жыл бұрын
This is epic!
@LostWax
@LostWax 2 жыл бұрын
Thank you!
@richardpaul2241
@richardpaul2241 2 жыл бұрын
@@LostWax found myself looking at rubber mats today 😁
@LostWax
@LostWax 2 жыл бұрын
@@richardpaul2241 😂
@retreauxnintendeaux1663
@retreauxnintendeaux1663 2 жыл бұрын
Question: How does hot glue & foam hold up in warmer climates? I'm in Southern Louisiana and some of our charity events are outdoors all day and I was just wondering how much softening/loosening hot glue does in the heat or in direct sunlight? Is there another way to hold foam together that you'd recommend?
@LostWax
@LostWax 2 жыл бұрын
Hi there, Yes, hot glue can get soft if it's in the direct sun, especially if it is black. You can see me testing hot glue in a hot car here: kzbin.info/www/bejne/n5Lcomqfe9OfnbM For an alternative glue, contact cement is going to be the best, just make sure you have adequate lung protection, and best to do it outside. Super glue also holds really well on foam, it's good for smaller parts.
@SeareanMoon
@SeareanMoon 2 жыл бұрын
ohhhhhhh, I like it!!
@LostWax
@LostWax 2 жыл бұрын
Thanks!!
@Ben-xf6ps
@Ben-xf6ps 2 жыл бұрын
très réaliste bravo Thank you ! You are very great
@LostWax
@LostWax 2 жыл бұрын
Thank you!
@megagamingteen
@megagamingteen Жыл бұрын
I will definitely make this and the proton pack
@megagamingteen
@megagamingteen Жыл бұрын
In friday me and my mom will get the materials from a amazing shop with everything for stuff like this
@beccamartin2791
@beccamartin2791 2 жыл бұрын
Nice to see you back! (first)
@LostWax
@LostWax 2 жыл бұрын
Good to be back😁Nice to see you too!
@whiterabbit1824
@whiterabbit1824 2 жыл бұрын
I would absolutely love to try this but when I follow the link it only has the back build but no wand. Can you help?
@LostWax
@LostWax 2 жыл бұрын
I just checked and it seems to be working. There are 3 separate PDF's to download. After you go through the checkout and get your email, click the "view content" link, and you should see "proton pack final", "Alice pack frame" and "Neutrona Wand complete" Click the download button next to the Neutrona Wand and you should be good to go.
@LostWax
@LostWax 2 жыл бұрын
Oh, I should mention, it's included with the proton pack build, and that one item has the three PDF's in it.
@sullyboy1974
@sullyboy1974 2 жыл бұрын
Fantastic video, great tutorial, what density is your 10mm and 6mm foam ?
@LostWax
@LostWax 2 жыл бұрын
I don't really know, it would be a medium density.
@marcjoneshouse
@marcjoneshouse Жыл бұрын
Good job man!
@LostWax
@LostWax Жыл бұрын
Thanks!
@MadMansCosplay
@MadMansCosplay 2 жыл бұрын
This is brilliant!
@LostWax
@LostWax 2 жыл бұрын
Thank you!
@BeatrizContreras-sv4cn
@BeatrizContreras-sv4cn 6 ай бұрын
Muy lindo mucha precisión, para realizarlo hay que tener todas las medidas justas
@Darkmanfl
@Darkmanfl 2 жыл бұрын
Awesome 👏🏻
@LostWax
@LostWax 2 жыл бұрын
Thank you! Cheers!
@mgbrowning
@mgbrowning 5 ай бұрын
Great video! My proton pack and Neutrona Wand will be outside for a Halloween display. I am going to use contact cement to glue it together instead of hot glue. I wish I could use hot glue. Any thoughts on how I could get the welded look without using hot glue?
@LostWax
@LostWax 5 ай бұрын
I think you could use caulking- make sure it's paintable, and then just squeeze it out like you'd do with hot glue. Just means you have to give it time to dry before you can move on.
@mgbrowning
@mgbrowning 5 ай бұрын
@@LostWax, awesome, yes, good idea!!
@that_weird_kid00
@that_weird_kid00 2 жыл бұрын
This is amazing!!!
@LostWax
@LostWax 2 жыл бұрын
Thanks!
@goatelope7539
@goatelope7539 2 жыл бұрын
Awesome work
@alejandroponscardenosa4106
@alejandroponscardenosa4106 Жыл бұрын
Amazin!!! Where buy foam in internet? I am crazy, dont find 😢. Thank you so much
@LostWax
@LostWax Жыл бұрын
I have a few links on my webpage that might help out: www.lostwaxoz.com/product-links/
@alejandroponscardenosa4106
@alejandroponscardenosa4106 Жыл бұрын
@@LostWax oh my god thank you. I hope to send my country. In Spain have not this foam. Thank youuuuuu
@EyesOfTheInternet
@EyesOfTheInternet 2 жыл бұрын
Why do you choose to use hot glue instead of barge contact?
@LostWax
@LostWax 2 жыл бұрын
It's just a personal choice, I know that contact cement has a lot more toxic fumes, and I have a hard time recommending that to people, knowing they probably won't use it with proper respiratory protection. Our son went through cancer when he was 6, and I just don't want in any way to contribute to that happening to someone else.
@MadMansCosplay
@MadMansCosplay Жыл бұрын
Thank you so much for these tutorials. I made a proton pack following them. I e-mailed you photo’s of the result. Did you get them?
@LostWax
@LostWax Жыл бұрын
Hi there, I don't think I saw them, I'll go look if it went in my junk mail!
@MadMansCosplay
@MadMansCosplay Жыл бұрын
@@LostWax Love to hear what you think about it. I mailed the photo’s to you on september 17th.
@3kVidsgoated
@3kVidsgoated Жыл бұрын
How long did it take you to build your neutrona wand?
@LostWax
@LostWax Жыл бұрын
To be honest, I don't know as I was designing and filming at the same time...
@dramapunk
@dramapunk 2 жыл бұрын
The part you did out of the candle could be a spool of thread minus the thread :)
@LostWax
@LostWax 2 жыл бұрын
Good idea!
@refreshingwaves2792
@refreshingwaves2792 Жыл бұрын
I really want to do this for halloween!! About how much did it cost to make the wand and pack? Im thinking of only making the pack but im kinda broke 😭 i cant seem to find any good floor mats either and though i was thinking of making it out of wood, i dont have any machinery. Where did you get your floor mat?
@LostWax
@LostWax Жыл бұрын
I got my floor mat at Canadian Tire, but unless you're in Canada that's not going to be super helpful. If you have no money or tools, I'd recommend making it out of cardboard. I have seen a couple cardboard packs made from my pattern and they actually turned out pretty good. Just don't take it out in the rain:)
@refreshingwaves2792
@refreshingwaves2792 Жыл бұрын
@@LostWax I've started making mine with foam that I got from michaels!! The tutorial has been really helpful and straightforward and I've been able to paint it already! I'm getting really close to the decorating stage and its only the second day! Thanks so much for the tutorial!!!
@LostWax
@LostWax Жыл бұрын
@@refreshingwaves2792 Awesome! That's great to hear you found some materials!
@TheBudgetHornet
@TheBudgetHornet 2 жыл бұрын
Has anyone in the UK made this yet? Really struggling to source the correct size tubing!
@tomc8157
@tomc8157 2 жыл бұрын
I like these much better than the shell kits. Anyone can build a Lego set with premade shapes.
@LostWax
@LostWax 2 жыл бұрын
Thanks!!
@robf8023
@robf8023 2 жыл бұрын
Hooolllyyyyy crrsasssppppp!!!!!!
@mos8048
@mos8048 2 жыл бұрын
10:05... amazing😢
@sergiovasconcellosocriativo
@sergiovasconcellosocriativo 2 жыл бұрын
Awesome!
@calebfederico-dyer8837
@calebfederico-dyer8837 2 жыл бұрын
❤️❤️❤️❤️❤️❤️❤️❤️❤️
@massimoclementini9243
@massimoclementini9243 2 жыл бұрын
Project?
@karisorrenti
@karisorrenti 2 жыл бұрын
Now make a Ghostbusters mini movie.
@LostWax
@LostWax 2 жыл бұрын
Hehe, I wish I had the time!
@MrVlandus
@MrVlandus 2 жыл бұрын
Awesome
@CarlosAdriánCONDORIPINTADO
@CarlosAdriánCONDORIPINTADO Жыл бұрын
como optenemos el papercraft
@Scrambled.eggs_
@Scrambled.eggs_ 2 жыл бұрын
15:41 now we know where the last glue stick lid is
@xCAPTNxBACONx
@xCAPTNxBACONx 2 жыл бұрын
When cutting the candle on the homemade lathe, did some fly off and become......... wait for it...... LoSt WaX? :P
@LostWax
@LostWax 2 жыл бұрын
😂
@johnhynesproductionslimite7522
@johnhynesproductionslimite7522 Жыл бұрын
Is there a reason why WTF 2mm foam isn’t available…I tried to contact the people on the website but it doesn’t seem possible now? Did the company go down?
@LostWax
@LostWax Жыл бұрын
Hmm, I'm not sure about that, whether they're just sold out because of Halloween, or if it's something else. Another place to try is TNT cosplay supply if you're in the U.S.
@johnhynesproductionslimite7522
@johnhynesproductionslimite7522 Жыл бұрын
@@LostWax I’m in Ontario Canada…anywhere else I could get it here?
@LostWax
@LostWax Жыл бұрын
@@johnhynesproductionslimite7522 Hey fellow Canadian!! You could probably get away with just regular craft foam. Michaels generally has it in large rolls of black and white, and it's pretty cheap. As for the higher density stuff like WTF, I don't actually know where to get it in Canada. BTW, Michaels also has rolls of thicker foam as well that's pretty decent.
@Jonnos_guitar_world
@Jonnos_guitar_world 2 жыл бұрын
If it is not personal about financials. But what was the worth of all of this?
@LostWax
@LostWax 2 жыл бұрын
I'm not sure what the total cost was, to be honest I didn't keep track.
@leecupples6938
@leecupples6938 2 жыл бұрын
Be sure to glue the parts correctly cuz I just glued it together and it made it to the left-handed instead of right-handed
@veronica5896
@veronica5896 2 жыл бұрын
🤯
@NewMessage
@NewMessage 2 жыл бұрын
I accidentally tasted the rainbow... is that ok? Found some skittles in my work apron pocket.
@LostWax
@LostWax 2 жыл бұрын
sweet find!!
@raynekraven
@raynekraven 2 жыл бұрын
i'm still hoping you will accept a commission for the pack/alice frame
@LostWax
@LostWax 2 жыл бұрын
Sadly, I haven't got the time....
@raynekraven
@raynekraven 2 жыл бұрын
@@LostWax I understand buddy :) Anyway, I bit the bullet and I bought the spirit pack, I'll modify the lights and I'll link the spengler's wand to it. It will be a less daunting project than building it from scratch. Still I watch you vids coz they are that damn good :)
@ToastyCubing
@ToastyCubing 2 жыл бұрын
this guy has the same shower curtain as i do
@LostWax
@LostWax 2 жыл бұрын
😂
@mariaagustinagentil2277
@mariaagustinagentil2277 2 жыл бұрын
ghostbusters
@JonMadsen70
@JonMadsen70 2 жыл бұрын
:)
@Elistopmotion
@Elistopmotion Жыл бұрын
Forget it I’ll do it myself because you’re a little video doesn’t solve anything for me😢
@claybiggs14
@claybiggs14 8 ай бұрын
@Elistopmotion what doesn't it solve
БОЙКАЛАР| bayGUYS | 27 шығарылым
28:49
bayGUYS
Рет қаралды 1,1 МЛН
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
DIY Ghostbuster Costume & Proton Pack - DIY Costume Squad
10:10
Dustin McLean
Рет қаралды 43 М.
Let's Get METAL! Ghostbusters PROTON PACK Upgrade
17:00
Punished Props Academy
Рет қаралды 48 М.
Hasbro Spengler's Neutrona Wand comparison video!
23:31
Ghostbusters News
Рет қаралды 135 М.
GBNW "How It Works" - The Proton Pack
5:49
Ghostbusters Northwest
Рет қаралды 62 М.
Adam Savage Inspects Ghostbusters: Afterlife's Hero Props!
11:02
Adam Savage’s Tested
Рет қаралды 203 М.
Building a Massive LEGO Tank
17:56
Brick Technology
Рет қаралды 421 М.
Making a Working Ghostbusters Ghost Trap!
11:44
Adam Savage’s Tested
Рет қаралды 420 М.
DIY Spartan Helmet. Greek Costume Helmet Made from Foam!
16:50