DIY Guide: 2015 Kia Soul Lower Ball Joint Replacement! Step-by-Step

In this step-by-step DIY guide, learn how to replace the lower ball joint on a 2015 Kia Soul. Lower ball joint replacement is crucial for maintaining proper suspension and steering functions. Follow along as we walk you through the process, from removing the old ball joint to installing the new one. Save money on costly mechanic fees and tackle this project yourself with our easy-to-follow instructions. Keep your Kia Soul running smoothly with this essential repair!
Remember to always prioritize safety and use the proper tools for the job.

[@charleslambertjr3842]

Great video, thanks for taking the time to share this information, I was just told that I need to replace the left front lower on my 2016 Soul this video was very informative 😎

[@valleywrenchin]

You are more than welcome and glad we can help! Whether you are going to repair it yourself or not, Happy Wrenchin! Please Subscribe😁

[@offspring30001990]

Just replaced a right front lower ball joint on a 2012 Kia Sportage. I was able to use a pickle fork to get the ball joint out of the knuckle but I had to upgrade to a 40 oz hammer to get the ball joint off the control arm. Definitely recommend MAP gas and a very large hammer to anyone doing this. Almost lost my cool there and was gonna burn the car to the ground, Almost.

[@valleywrenchin]

Was the lower control arm similar on the sportage? Glad you got it fixed!

[@foley15136]

Air tools sure make things easier!

[@valleywrenchin]

haha yes they do! I dont always use them, sometimes too powerful, but then again, sometimes you do need them!!

[@chandranicole2432]

Where did you get your new joint from? I need to replace mine but I can't find it without having to buy the whole assembly

[@valleywrenchin]

Please send us an email to [e-mail]

[@queenncal6439]

Is it necessary to take the caliper and brake bracket off to get this done?

[@valleywrenchin]

That's only 4 bolts and you get plenty more room to work with.

[@valleywrenchin]

Thank you for watching and please subscribe to our channel

[@mz7dyj]

Nice, but not enough light. It is hard to see some components...............

[@valleywrenchin]

Thanks for watching. If you need any help or advice, email us at [e-mail] Please subscribe.

[@chrismanning1171]

What is the torque spec on that bolt?

[@valleywrenchin]

Hi Chris, thanks for watching! Can you please let me know what bolt at what time of the video?

[@TheGuruStud]

Easier to replace the arm. Fuck this stupid design.

[@valleywrenchin]

I hear ya

[@AToolWithTools]

If you think this design is bad you should see the more common design where the ball joint is press fit into the control arm itself. This way at least gives you a fighting chance without having to do the A-arm (it was gonna be $329 for just one for me) or get a ball joint press.

[@kenholt8297]

Audio way too low...

[@valleywrenchin]

Thanks for watching!