diy heater for rzr, we dont ride much in the winter, this was better than spending $400+.
Пікірлер: 18
@joebidden49148 ай бұрын
This works, but if you get an exhaust leak that's gonna be a silent death for everyone in the cab with the windows like that. There are many reasons why to branch off of the coolant system for heat, but yes there is a lot of heat that comes in there from off the exhaust side of the motor. Hopefully you'll switch to a proper heater system for your guys safety. Even without an exhaust leak there is still exhaust back there and its gonna get sucked up into the cabin. Especially if you're driving at slow speeds.
@marcnelson26452 жыл бұрын
Been thinking about something like this. . Glad to see someone try it.
@LittleMan_LittleTractor2 жыл бұрын
It works good, I made another video of a modification I made to it. Hopefully will post soon
@jake_of_the_jungle98403 ай бұрын
I bought mine with a heater already in it. I don’t know how it works, but it looks like it uses a heat exchanger off the coolant lines and uses a fan that blows air through it.
@chris227able Жыл бұрын
What did you use in the engine compartment to collect the heat ? Heater duct saddle around the exhaust ? What size if you did ?
@AA-mk4pu2 ай бұрын
Why don’t you just pipe your exhaust into the cab ? 🤦🏽
@bradlisa59512 жыл бұрын
Although PVC is flame resistant, PVC products release when heated. There's a reason they sell a heater core style heater kits.
@LittleMan_LittleTractor2 жыл бұрын
Thank you for the information, I will do some research on this!
@molly78712 жыл бұрын
All my heater vents in my car are plastic.
@Bos742 Жыл бұрын
How does hot water go thru PVC without causing the glue to release and pipes leak then? I’ve never had a problem with proper primer and gluing, none have come apart for me.
@william.eckerle87342 жыл бұрын
What kind of blower is that and where did you get it?
@LittleMan_LittleTractor2 жыл бұрын
Attwood 3 inch bilge blower for a boat. Amazon prime $23.
@william.eckerle87342 жыл бұрын
@@LittleMan_LittleTractor thank you ... I found a 4" unit but haven't found a 3" unit.
@LittleMan_LittleTractor2 жыл бұрын
@@william.eckerle8734 no problem. I originally ordered the 4 inch. It did not fit between the seats lol
@harveyhudspeth6824 Жыл бұрын
Thanks you’ve given me ideas , I was gonna use a computer fan 12v I had laying around and drill 3” hole on that cover & mount fan on the back of cover and toggle switch above , kind of thinking about running that dryer vent hose to the exhaust header ? Maybe using a 3” boot of some kind with hose clamps around header and run hose to cover