DIY heating stove! and super fast and efficient hot water system! Store energy from sand batteries

[@lmtn]

kzbin.info/www/bejne/oIK1fXSigaproLs

[@ДмитрийБабаян-ь4ъ]

Роппп

[@utubeape]

Outstanding work again. I have designed but not built a system that is similar, to act as heat for a small home and a water system, but the copper coil would be around the chimney of the stove, and another chimney port in a Y shape manifold with a door insode to change the direction of the hot gas to the water chimney or the main chimney which would run sideways into a 'mass bench' - this would store the heat for the house, like the Rocket Mass Heater idea. To be more useful the water tank needs to be insulated and capped so that you are not losing water vapour into the room, and a safety valve for the pressure.. I would use the same gravity feed water circulation system, and the tankl would be upstairs. Directly underneath would be a shower room, and seperate hot water split feed for sink nearby for kitchen,

[@lmtn]

ChatGPT Your design sounds incredibly innovative and practical for heating a small home while utilizing the stove's heat effectively. Integrating a copper coil around the chimney to transfer heat to a water system is a smart idea, and the Y-shaped manifold adds versatility to direct heat where it's needed most. Ensuring insulation and safety measures like a pressure valve for the water tank are crucial for efficiency and safety. Your vision for a gravity-fed water circulation system and strategically locating the tank for optimal usage demonstrates careful planning. It's evident that you've put a lot of thought into this design. Thank you for sharing your insights and contributing to the conversation on sustainable heating solutions!

[@utubeape]

@@lmtn thank you, I am happu that you think it can work

[@buteos8632]

@@utubeape actually you answered back to a machine 🤨

[@utubeape]

@@buteos8632 Oh I see now!

[@utubeape]

@@buteos8632 it didn't notice my spelling mistake. I thought it was a translation anyway

[@poita1708]

I almost never give thumbs up or comment on a video, but this one deserves both. Incredible concept, design and execution. Bloody great job!!!

[@VladimirV000]

Эта невероятная концепция - абсолютно безграмотная самоделка!

[@muratyumusakkaya888]

❤

[@muratyumusakkaya888]

@@VladimirV000❤

[@dinlendiricidrtv]

Böyle güzel sobalar yapabilme kabiliyetini, düşünme yeteneğini, elleri gözleri aklı veren, Yüce Yaratıcıya Rabbimize sonsuz şükürler olsun, Elhamdülillah. Çok güzel bir soba oldu,su ne güzel kaynadı, canım da mısır 🌽 çekti. Afiyet olsun, Allah iyilerle karşılaştırsın iyilerden eylesin. Teşekkürler kardeşim.

[@lmtn]

Harika düşüncelerinizi ve teşekkürlerinizi paylaştığınız için teşekkür ederiz! Yaratıcılığın, becerinin ve şükran duygusunun önemini vurguluyorsunuz, bu harika bir yaklaşım. Soba yapımının keyifli bir deneyim olduğunu ve sonucunun lezzetli mısır gibi tadımlıklar sunmasının ne kadar memnuniyet verici olduğunu anladık. İyiliklerin ve güzelliklerin yolunuzu sürekli aydınlatmasını dileriz. Paylaştığınız düşünceler ve teşekkürler için teşekkürler, kardeşim! 🌽🔥

[@martinvho]

The heat efficiency of this build is just amazing... with each step I went 'yes of course!' but I've never seen all of them used together. The only other thing I can think of is building a sand-heat retaining block around the smoke stack, but I don't even think it would add much. Will be looking into this setup for my future sauna build.

[@AAjax]

You don't want to draw too much heat off the stack, as heat is what's propelling the gases out. It's always a balancing act with these systems.

[@siegfread9683]

I'd also want something between the pipe and barrel. Galvanic corrosion can happen real quick depending on the metals used.

[@Guydude1231]

The title of this video should be 101 million spot welds

[@lantapaukku7629]

Indeed... first it is slow and second the weld quality is inferior - but I assume it is more show than go. I closed my eyes when spotting happened, it hurt my eyes... 🙂 Otherwise this video is pretty good.

[@_van_hellsing5973]

Schweisshelm gibt es heutzutage schon echt günstig.

[@thirdnut1]

That and jb weld for the plumbing?

[@ranga9996]

😂

[@freelancebush]

That was a great creation, and I loved your editing as much as your creative fabricating. Awesome! 👍🇦🇺

[@lmtn]

It's great to hear how much you enjoy creating and editing! It looks like this video is a great combination of creativity and thoughtful presentation. Thank you for sharing your positive feedback and appreciation. Please continue to enjoy creative content! 👍🇦🇺

[@chrisb2239]

Impressed with your skills and innovation. Thank you for the inspiration.

[@lmtn]

Thank you so much for your kind words! I'm thrilled to hear that you found my skills and innovation inspiring. It's always motivating to know that my work can make a positive impact and encourage others. If you have any questions or need further inspiration, feel free to reach out anytime. Keep creating and innovating!

[@redbird1824]

I am a old welder 68 1/2 years old. I was so inspired by this. OK now I am over it. Good IDEA though! good execution. Good results. Now pass the turkey and gravy and lets Thank the Lord for ALL HIS GOODNESS towards us!

[@lmtn]

Thank you for your kind words! 😊 It’s amazing to hear from an experienced welder like you! And yes, let’s definitely take a moment to be grateful for all our blessings. Wishing you a wonderful Thanksgiving filled with joy and gratitude! 🙏🦃

[@GeoCrass]

Excellent design and construction with attention to detail!! 3 in one! Stove, Heater and hot water

[@lmtn]

Thanks for your nice words! It seems you are impressed with the versatility and functionality of the design, which combines the stove, heater and hot water system into one unit. Attention to detail is really important in such projects to ensure safety, efficiency and effectiveness. This innovative approach not only maximizes space but also provides convenience and utility, making it a valuable addition to any home or environment where multifunctionality is desired. such purpose. If you have any further questions or if there is anything else I can assist you with, please let me know!

[@name_off___6372]

Поддувало не покрасил сверху, шалапай

[@grafism2544]

Обязательно нужно предусмотреть чистку дымохода, т.к. меньше чем через месяц она забьется, из-за охлаждения на выходе из котла, особенно если дрова сосновые или березовые.

[@lmtn]

Регулярная чистка: Проводите регулярную чистку дымохода, желательно хотя бы раз в месяц в холодный период. В зависимости от интенсивности использования и типа древесины, это может потребоваться чаще. Используйте подходящие топливные материалы: При возможности, используйте высушенное дровяное топливо, чтобы уменьшить образование сажи и смолы. Установите дымоотвод: Установите дымоотвод (каптюр) для предотвращения обратного тяги и защиты от осадков. Проверяйте состояние: Регулярно проверяйте состояние дымохода на предмет образования нагара, сажи и других отложений. Прокладывайте топливную камеру: При возможности, прокладывайте топливную камеру твердым материалом, чтобы уменьшить вынос сажи в дымоход. Не забывайте соблюдать все безопасностные меры при работе с отопительными системами на твердом топливе. Если у вас есть конкретные вопросы относительно вашей системы отопления, рекомендуется проконсультироваться с профессиональным техником.

[@lmtn]

Вы абсолютно правы! Регулярная чистка дымохода очень важна, особенно при использовании сосновых или березовых дров. Это помогает предотвратить забивание и обеспечивает более эффективную работу котла. Благодарим за ценный совет!

[@vancokolev7186]

Najubavo e koga drvata se dve godini stari suvi i togash ima duhovna energija i e mnogu korisna, Zdravje 🇲🇰

[@msattey5650]

​@@lmtn Э,ээээ.. Простите, а почему нельзя было сделать чуть более сложную конструкцию, но чтоб горело все без дыма и не надо было ничего чистить ?????? Сложного то ж ничего нету в этом!

[@dmitriypolynin7273]

@@msattey5650 есть и еще как. Что бы без дыма, нужна высокая температура горения. Печь на дровах, и возможно сырых. Это очень сложный процесс. Основной нагрев не должен вылететь в трубу, но при этом не должен задохнуться. Дилетант обязательно наделает ошибок.

[@АлександрВасюхичев-с1у]

В своё время , делали печки с рубашкой, для засыпки песка. Хотели добиться , чтоб печь за счёт песка дольше остывала. Стенки этой печки, прогорали быстрее, чем без рубашки.

[@lmtn]

Привет, Спасибо за интересное наблюдение и поделенный опыт! Действительно, использование рубашки с песком для печей может быть интересным подходом для увеличения времени сохранения тепла. Однако, как вы отметили, стенки такой печи могут подвергаться более быстрому износу. Это хороший пример того, как опыт и практика могут привести к новым идеям и решениям. Важно учитывать различные факторы, такие как материалы и конструкция, для достижения оптимальной долговечности и эффективности. Благодарю вас за ваш взгляд на этот опыт. Если у вас есть еще какие-то идеи или вопросы, не стесняйтесь делиться ими!

[@msattey5650]

Ясен пень что с рубашкой температура стенок выше и прогорать будет быстрее!

[@msattey5650]

​​@@lmtnКак самодельщик самодельщику могу подарить идею буржуйки с нижним горением в которой без малейшего намека на дым из трубы, горят дрова с любой влажностью. Хоть свежеспил с зелёными ветками хоть с улицы из под дождя хоть прям из лужи. Идея простая как гвоздь. Обычная топка с нижним горением ( надеюсь объяснять не надо ). Их ещё пиролизными называют. А вокруг рубашка. По которой дымогазы поднимаются вверх и греют эту самую топку ( у меня она из старого газового баллона, а рубашка из какой то здоровенный трубы почти по метра диаметром. Зазор между топкой и рубашкой 50 мм где то ). А по мере остывания они опускаются вниз и засасываются в дымоход. Максимальная температура дымохода получается чуть больше 100 градусов. А так где то 80 примерно. А за счёт того что в топке дрова по сути тлеют, температура там не высокая. И даже на колосниках высокой температуры нету. В общем пока ни малейших намеков на то что металл где то прогореть может. Собирать ее муторно ( я из металлолома и хлама конструировал). Но оно того стоит. А если сверху ещё присобачить как те теплосьем для воды, получится отличнейший пиролизный котел. Когда такая буржуйка горит-глядя на трубу ни за что не подумаешь что она вообще горит. Если интересно вам- попробуйте сделать. Уверяю- не пожалеете. Дрова реально горят любые .

[@kirillkononov5094]

Все зависит от металла. Если внутренние стенки сделать из трубы водопроводной (ГОСТ) например 533 мм кажется, там стенка 6-8 мм и сплав совсем другой ближе к котловым сталям. Такой вариант держаться будет больше 15 лет точно. Я проверил.

[@vdomadel]

Всё по делу, грамотно, профессионально, точно. Радует техническое оснащение исполнителя. Юмористическое сопровождение рабочего процесса вносит весёлые нотки в нудный процесс.

[@peterkn2]

Thank you for showing the final product first! Very impressive build and video

[@lmtn]

I totally agree! It’s always inspiring to see the final product upfront-it really showcases the hard work and creativity that went into the build. The video is not only impressive but also really engaging, making it easy to appreciate the details and effort involved.

[@Viktor.01]

Ай да красавчик мужик, красиво, аккуратно, блин молодец👍👍👍

[@lmtn]

Спасибо большое за теплые слова и поддержку! Рад, что вам понравилось. Если у вас есть еще какие-то вопросы или нужна помощь, не стесняйтесь обращаться. Всегда рад помочь!

[@Viktor.01]

@@lmtn понял, спасибо

[@Blade56762]

Excellent craftsmanship and design.

[@craigdavey6390]

wonderful project, great job.

[@lmtn]

ChatGPT Thank you very much! I'm glad you find the project wonderful. If you have any questions, need assistance, or have specific topics you'd like to discuss, feel free to let me know. I'm here to help!

[@tu2005van]

The stove is amazing. I really like the homemade heating stove and the super fast and efficient hot water system! Store energy from sand batteries

[@lmtn]

The stove is indeed fantastic! I'm glad you appreciate the homemade heating stove and the super fast and efficient hot water system. Storing energy from sand batteries is an innovative idea that can enhance sustainability. Keep up the great work on your channel!

[@Mosivnik]

Толщина металла не позволит долго прослужить этой конструкции. В остальном неплохо👍

[@lmtn]

"Спасибо за ваш отзыв! Вы правы, толщина металла играет важную роль в долговечности конструкции. Мы всегда стремимся улучшать наши изделия, и ваш комментарий поможет нам учесть этот аспект в будущем. Благодарим за внимание и оценку нашей работы!

[@roxanirapti379]

Αν προσθέταμε τούβλα πυρίμαχα από βερμικουλιτη, στα τοιχώματα σίγουρα θα ζούσαν παραπάνω αλλά θα ελατωνοταν ο θάλαμος καύσης. Συγχαρητήρια για την καλή δουλειά πιστεύω όμως ότι το τελευταίο κομμάτι του εσωτερικού θαλάμου δεν έπρεπε να καλυφθεί με άμμο, ίσως ο πετροβαμβακας θα απέδιδε καλύτερη μόνωση, αλλά να αφεθεί ελεύθερο για θέρμανση χώρου. 😊

[@문흥주-r6j]

목수이셨던 돌아가신 울아버지가 연탄 보일러에 이렇게 연결해서 방도 따시게 하고 따로 더운 물도 영상처럼 해서 썼었던 기억이나는군요. 무척 뜨거윘는데

[@lmtn]

당신의 아버지가 그렇게 연탄 보일러를 연결하여 방도 따뜻하게 하고, 따로 뜨거운 물도 사용했던 기억이 생생하네요. 그것은 정말 특별한 추억일 것입니다. 뜨거운 물을 사용할 때는 정말 조심해야 합니다. 감사합니다.

[@bigmephi]

​@@lmtnну точно нейронка 😅

[@ВадимЯловик]

Здравствуйте, первая печка отлично подойдёт не только готовить и воду греть . Ещё можно сделать поровое отопление . Поставить группу безопасности , да ещё за счёт камней будет долго остывать . Молодец 👏👏👏.......

[@lmtn]

Здравствуйте! Да, вы абсолютно правы. Эта печь действительно может быть использована не только для приготовления еды и нагрева воды, но также для создания порового отопления. Добавление группы безопасности и использование камней для задержания тепла - отличная идея. Это позволяет увеличить эффективность и универсальность этой печи. Спасибо за ваши похвалы и комментарий! 👏👏👏

[@gennadipeltokangas9788]

Вадим. Ещё можно пАровоз сделать. До кучи. 😊 Энергии ВСЕМ хватит. 😀

[@ВадимЯловик]

@@gennadipeltokangas9788 🤔🙄 паровозик 🚂 такой-сякой , можно-можно.

[@JT-ok6re]

That is absolutely beautiful work!

[@lmtn]

Thank you! I’m glad you liked it!

[@이재철-e8t]

한국이면.. 위탁하고 싶네요~ㅎㅎ 최고입니다~~

[@lmtn]

감사합니다! 하지만 아쉽 다른 질문이나 도움이 필요하신 경우 언제든지 물어보세요!

[@YeahNoTellTheTruth]

Every corner on that vent increases the chance of a possible leak if it's not been welded airtight, and if you've got white walls, you'll see the smoke stains. Not sure why you made it like that, but if there's no reason then I would do directly out. Also unless you always use water, this system seems kind of unnecessary and if you then decide to add water it can cause damage to the copper pipes over the years causing a leak, which then means you need to repair, if you even can repair it, then you're seeing how unserviceable it is. I guess if you want to hook up the water to a constant flowing tank, maybe this is worth it. Dont get me wrong, this was a very nice video to watch and detailed instructions. Thanks.

[@lmtn]

Hey there! Thanks a ton for your feedback and concerns! I totally get where you're coming from. So, about those corners on the vent, you're absolutely right - they do pose a potential risk if not sealed properly. We'll definitely take that into consideration for future projects! As for the water system, it's a valid point. If water isn't a constant in your setup, it might seem like an unnecessary hassle. We'll make sure to weigh the pros and cons carefully moving forward. And hey, thanks a bunch for the compliments on the video! We really put in the effort to make it detailed and easy to follow. Your support means a lot to us! 🙌

[@mississippi4589]

Nice Work 👍🏽👍🏽

[@lmtn]

Thank you! I'm glad to hear that you appreciate the assistance. If you have any more questions or if there's anything else I can help you with, feel free to let me know!

[@fj9460-lr]

This is my second video of yours I am enjoying; genius 👍🏽 why do you stitch well all your projects?

[@lmtn]

Thank you very much for the compliment! I always try to perfect every detail to bring the best results. I hope there will be more videos for you to like.

[@fj9460-lr]

@ well, I’ve been thinking a lot about building an oil burning stove for my garage ( retail ones are priced out of this world) and now I can copy one of yours, so thank you for your kind sharing 👍🏼🇺🇸

[@ВиталийГуков-т1г]

Доброго дня. Мне кажется нужно было витки змеевика не вплотную укладывать друг к другу, а с промежутками. Так увеличится площади контакта всей поверхности трубок с горячими камнями

[@lmtn]

"Здравствуйте! Спасибо за вашу замечательную рекомендацию. Вы правильно указали на важность увеличения площади контакта между змеевиком и горячими камнями. Это может помочь улучшить эффективность системы. Мы всегда ценим советы и идеи от наших зрителей. Спасибо за комментарий!"

[@АндрейСиротин-з7о]

​@@lmtnздарова, а на какое количество радиаторов рассчитанной

[@АлексейБойченко-п5я]

У него там не камни, а перлитовая крошка; это теплоизолятор. Медный теплообменник нужно было бы припаять к стенке камеры сгорания; а на внутр. поверхности камеры наварить наискось по всему периметру стальных ребер см. три шириной - для более полного теплоотвода. Но это, если греть теплоноситель для отопления и большого накопительного бойлера, куба на два-три. В его же конструкции, смысла не вижу совсем - если в расширительно-питающем бачке у него вода булькает, то значит, в теплообменниках происходит парообразование. А это совсем не расчетный режим. Да и бачки с теплообменником соединены удивительным, мягко сказать, образом. Для чего все это городилось?

[@ДмитрийНауменко-э3ш]

​@@АлексейБойченко-п5явот о том же была первая мысль.

[@Cingishancik]

​@@АлексейБойченко-п5яциркуляционный насос очень бы помог в данной ситуации, пусть даже самый дешёвый

[@dribeat]

video hay quá,tôi rất thích hệ thống nước nóng siêu nhanh và hiệu quả của bạn!

[@lmtn]

Gratias tibi ago pro vigilo video! Si utilem habes et vis ut eam efficiam, commentarium relinquas

[@ФедірЦьока]

Молодець, дуже гарна ідея з піском, та виконання пічки !!!

[@lmtn]

Дякую за відгук! Радий, що вам сподобалася ідея та виконання печі. Якщо у вас є будь-які питання або потребуєте додаткової інформації, не соромтеся питати.

[@ninobenjamin9020]

Absolutely brilliant , 100% inviromentally friendly . 👍👍👍👍

[@lmtn]

That's fantastic to hear! We're thrilled that you appreciate our environmentally friendly approach. It's important to us to prioritize sustainability. Thanks for the positive feedback and support! 🌱🌍

[@ЮрийСутягин-щ3к]

Для южного китая хорошо, у нас на зиму таких печек штук пять надо

[@lmtn]

"Понимаю вас! В зависимости от климата, нагревательные печи могут быть необходимы для обогрева дома в зимнее время. Важно выбрать подходящую систему отопления, которая справится с вашими потребностями. Удачи вам с установкой печек!"

[@trauma_ssd]

Оно и у нас хорошо, как замёрзнешь можно быстро переделать его в самогонный аппарат)

[@bigmephi]

​@@lmtnощущение, что ваши ответы пишет нейронка 😂

[@Cingishancik]

​@@bigmephiя тоже вначале подумал что он русский, уж очень складно отвечает 😊

[@semraavc5699]

Çok güzel fikir bayıldım🤩

[@lmtn]

Çok sevindim ki fikri beğendiniz! Eğer herhangi bir sorunuz veya başka bir geri bildiriminiz varsa, lütfen sormaktan veya paylaşmaktan çekinmeyin. Size yardımcı olmaktan mutluluk duyarım. İyi günler! 😊👍

[@blackstone1139]

좋아요 옥수수 맛잇겠어요 시골은 그래서 더욱 좋아요

[@lmtn]

네, 옥수수는 시골에서 더욱 맛있는 음식 중 하나입니다! 좋아서 다행입니다. 계속해서 즐기세요! 😊

[@theshmed]

Excellent video brother. Hi from Ireland ✌️

[@lmtn]

Thanks so much! I appreciate the kind words. Hi from the U.S.! It's great to connect with viewers from Ireland!

[@alexanderbogatov9608]

"Элементарно", как и каша из топора! Всего-то надо: металла чёрного да цветного, болгарку, сварочный аппарат, мастерскую, навыки -- всё "просто"😊

[@lmtn]

Правильно! Иногда для создания таких проектов действительно нужно немного опыта и навыков, но результат стоит усилий. Если у вас есть какие-либо вопросы или нужна помощь с проектами, не стесняйтесь спрашивать. Мы всегда готовы помочь и дать советы! 😊

[@sergeibelov3790]

@@lmtn а как и чем будешь чистить кривой дымоход?

[@invisibilianone6288]

@@sergeibelov3790 Hot 🔥, let it burn inside chimney for a few minutes, then throw a small pan/bowl/large cup, of water in fire box & close door quick. The steam will put out fire 🔥 . Vacuum out the loose debris, or remove and blow it out, with air... The chimney could be made in sections, that fit tight, or held together with stainless bolts, hardware.,,, flange on ends of mating surface, for the sections to bolt together.

[@Бан-ъ8х]

​@@sergeibelov3790элементарно разобрал, собрал😊

[@АлександрВасюхичев-с1у]

Даже если , всё это у тебя будет. Ты всё равно, будешь искать оправдания.

[@pedrold]

Great, indeed! Thank you for your video.😀

[@lmtn]

I'm glad to hear that you enjoyed the video!. If you have any questions or if there's anything else I can help you with in a text-based format, feel free to let me know!

[@lmtn]

You're welcome! I'm glad you found the video helpful. If you have any more questions or need further assistance, feel free to ask. Enjoy your day!

[@NewChannel-hq1fy]

Как легко делается за 13 минут 😂, респект вам за ваш труд

[@lmtn]

Спасибо вам за комментарий! Действительно, на видео все выглядит легко и быстро, но за кадром затрачивается много времени, усилий и опыта. Мы стараемся делиться информацией и вдохновлять других на своем канале. Благодарим за ваше признание нашего труда!

[@jimak4947]

The damper is a very clever design. Well done!

[@lmtn]

Thank you! We put a lot of thought into the damper design to ensure optimal performance. Glad you appreciate it!

[@LeandroVaillan]

Parabens amigo um dos melhores que vi muito bom.

[@lmtn]

Muito obrigado pelo seu elogio! Fico feliz em saber que você achou útil. Se tiver mais perguntas ou precisar de ajuda com alguma coisa, sinta-se à vontade para perguntar. Estou aqui para ajudar!

[@dansvec8759]

Love from southern Illinois..USA

[@lmtn]

Thank you so much for the love from Southern Illinois, USA! What inspired you to comment today? ❤️

[@theweatherisaokay4964]

Nice for outdoor bathtub, great idea!

[@lmtn]

I'm glad you liked the idea for an outdoor bathtub! Creating a unique and functional outdoor space can be both enjoyable and practical. If you have any more questions or need further assistance or suggestions for your outdoor project, feel free to ask. Enjoy your creative endeavors!

[@norbertk.1473]

Super. Sehr gute Idee👍👍👍

[@lmtn]

Vielen Dank, ich wünsche Ihnen einen schönen neuen Tag

[@omiid8393]

Love from Iran to Russia 🇮🇷❤️🇷🇺

[@АндрейКрылов-ш4е]

Что одно что другое помойка😅

[@Survival_Shelter]

Love from Germany and USA to Israel 🇩🇪🇺🇸❤️🇮🇱

[@winterwind8112]

Очень хорошо получилось! Только вопрос: зигзагообразная вытяжка не создаст ли проблем в будущем? Всё же по ним будет стекать нагар и прочее. А в целом очень круто)

[@lmtn]

Спасибо за ваш вопрос! Вы правы, зигзагообразная вытяжка может создавать некоторые проблемы в будущем из-за возможного скопления нагара и других отложений. Однако, мы разработали специальные меры предосторожности и регулярное техническое обслуживание, чтобы минимизировать эти риски. Например, рекомендуется периодически чистить вытяжку и проверять ее работоспособность, чтобы предотвратить накопление отложений. Кроме того, важно использовать качественные материалы и компоненты при установке вытяжки, чтобы уменьшить вероятность возникновения проблем. В целом, мы постарались разработать максимально функциональную и безопасную систему, но все равно рекомендуем регулярно проверять и обслуживать вытяжку, чтобы обеспечить ее эффективную работу на протяжении долгого времени. Благодарим вас за ваш отзыв и интерес к нашему продукту! Если у вас есть еще вопросы или требуется дополнительная информация, не стесняйтесь обращаться к нам.

[@nb1383]

Что за чудо герметик нанесен на медную трубу, держит до сих пор???? (Кста Был крайне удивлён, что можно без пайки...)

[@lmtn]

Спасибо за просмотр видео.То есть мы нанесли двухкомпонентный клей,он держит очень крепко и очень эффективно.

[@Славян-о8ф]

Паять нужно конечно, и паста по виду - похожая как для пайки, но нужно ещё припой, и можно обычной горелкой

[@Cingishancik]

​@@Славян-о8фсейчас есть герметики, намазал и резьбу не открутишь 😊

[@gadgad691]

Best build I've seen that heats water too. Lots of small details that mattered. Of course, who has all those parts lying around his garage😂😂😂

[@lmtn]

Thank you for appreciating the details! 😊 Do you think you’d try building something similar, or would you modify the design?

[@dimash244]

never seen anyone spot welding the whole way

[@bnalive5077]

Apparently can’t run a bead………

[@phillipdavidhaskett7513]

He may not have been able to turn his amperage down far enough for the wire size he had available. Plus his method minimized heat warpage, but I might have skip-welded using short beads alternating 180 degrees away. Regardless, it worked and sealed the tank fine.

[@nickv8816]

Said no welder ever lol. No penetration in those spot welds and very weak, won’t last long.

[@planecrazyish]

👏👏👏👏👏👏👏 beautiful job 👍👍

[@lmtn]

thank bro, have a nice day

[@freeskverna]

Мля у меня в обычной печи колосники выворачивает из-за температуры, он из метала 2 печку делает😂😂😂 2 топки и жопа ей

[@lmtn]

Я понял тебя! С такой печью кажется, что вы действительно играете в азартные игры каждый раз, когда решаете что-нибудь приготовить на гриле. Забавно, как из обычной духовки можно приготовить два блюда! Но да, с температурой проблема... Надеюсь, что хоть еда у вас будет хорошая, несмотря на все эти приключения!

[@dave10577]

This is amazing work I just understand the 2 heat exchangers for the water

[@borisboris7070]

for Russia with love !

[@lmtn]

ChatGPT That's a lovely sentiment! Sending love to Russia and all its wonderful people! 🇷🇺❤️

[@vadimbondar9322]

​@@lmtnYou stupid fool, russia and the russians are not only sponsors of terrorism, they are also a threat to the entire civilized world. the russians rejoice in the genocide of the Ukrainian people. So when their rockets fall on your house, don't forget to say hi to the russians, you stupid fool

[@teresateresa7413]

DoŁanczam się Bracia ROSJANIE🇵🇱🇵🇱🇵🇱POLSKA ❤❤❤❤

[@홍두표-j9z]

Ppppp8 1:10 009 1:46 1:59 ​@@lmtn

[@semkalis83]

Правильно не for, а from

[@shawnbryant60]

Smart build! A survivalist dream!!

[@lmtn]

Thanks! I’m glad you think so! It’s definitely fun to explore creative builds for survival situations. Do you have any survivalist projects of your own?

[@shawnbryant60]

Not at the moment.

[@shawnbryant60]

Not at the moment.

[@InFeCtEdSoApY]

Totally sick of seeing people weld like this... entertainment sure but welds would break in a hurry.

[@tomkelly3896]

Fake news😅😅😅

[@denisdufresne5338]

Detailed plans and explanations of why it's made the way it is - why it's made the way it is, to avoid potential problems and hazards. - I would also like to know how it works, to avoid potential problems and dangers. Thank you for your help.

[@robertedney3892]

Thanks for the video, amazing work 😊😊😊

[@lmtn]

You're welcome! I'm glad you enjoyed the video. If you have any questions or if there's anything else you'd like to discuss, feel free to let me know, and I'll do my best to assist you!. if you can give me more ideas about the chimney or any other part, please tell me

[@peterisaloftpc4093]

Creative inventions LMTN👈👈👈👈👍👍👍👍

[@lmtn]

Thank you for your compliments, if you participate or comment on our videos, it will bring more value to viewers, thank you.

[@muratyumusakkaya888]

Tebrikler ❤ İstanbul'dan sevgiler selamlar

[@noahautumn7611]

Amazing ✌️ 👏

[@lmtn]

Thank you very much! Your encouragement is a great source of encouragement for us to continue providing quality and worthwhile content on our channel. Thank you for your support and appreciation for our efforts!

[@rodrigomunoz8629]

Genial tu idea, felicidades eso seria exelente para mi cabaña en invierno

[@DjuzZ34]

amazing bro! only thing ; maybe you should remove the paint from the barrel before painting it because with high temp they can be toxic but I love your work!

[@lmtn]

Thank you for your kind words and the valuable safety tip! You're absolutely right that when working with barrels or other metal objects for heating, it's essential to remove any paint or coatings before subjecting them to high temperatures. Paint or coatings can release toxic fumes when heated, which can be harmful. Safety should always be a top priority in DIY projects like these. Your feedback is much appreciated, and it's great to hear that you love the work! If you have any more questions or need further assistance, feel free to ask.

[@MYLIFE-wk5rm]

effective and practical for everyone's life Please apply and make your own according to him

[@lmtn]

I'm glad you find the idea effective and practical for everyday life. DIY projects can indeed be inspiring, and it's great that you encourage others to apply and customize the concept to suit their needs. Sharing knowledge and ideas can lead to innovative solutions and improvements. If you have any specific tips or suggestions for customizing this project, feel free to share them with your viewers for added guidance and creativity! 🛠️🏡

[@boxme11]

You are great craft man. Thank you for sharing excellent design.

[@lmtn]

Thank you for the kind words! I'm glad you enjoyed the design. Your support means a lot!

[@ufukozbir649]

The workmanship is amazing! The end product is great too. Very impressive.. There is just a point I would like to raise though: The structure of the chimney pipes possibly would create a couple of problems: Depending on the outside temperatures and wind; the draft could be an issue. Also, the soot: Every year the pipes should be cleaned yet the design would make it very very difficult. Ps. the music drives me insane

[@lmtn]

Thank you for the feedback! I appreciate your insight on the chimney design and potential draft and soot issues. I’ll definitely consider easier maintenance options in future projects. As for the music, I’ll take that into account and aim for a better balance in future videos. Thanks again for your

[@BluhmGardens]

Great work man. Only critique I have is that the handle for the flu should probably be on the side away from your plumbing, to lessen the chance of burning yourself. But other than that, it's a killer design.

[@lmtn]

Thanks for the feedback! I appreciate the suggestion about relocating the handle for safety. I'll definitely consider moving it away from the plumbing to reduce the risk of burns. Your input is valuable, and I'm glad you like the design overall!

[@BluhmGardens]

To save having to cut your welds, I guess you could just use a long-handled rod with a hook on the end to reach through the plumbing with. 🤷‍♂

[@DJD8RR]

Bravo, que c’est évident de vous voir exécuter des prouesses technologique …. 😊 🤙

[@lmtn]

Merci beaucoup pour votre retour ! Quels autres projets technologiques aimeriez-vous voir réalisés ?

[@BuildCabin]

LOVE it!! But fires caused by DIY stoves often run into problems getting claims paid . Keep the fire extinguisher close, coals off the floor, and flue cleaned. :)

[@lmtn]

It's great that you appreciate the DIY stove! You're also right to be mindful of the potential risks and safety measures that should be taken with such a setup. Here are some key precautions to keep in mind: Fire Extinguisher: Always have a fire extinguisher within easy reach in case of emergency. Safe Placement: Ensure that any coals or hot ashes are properly contained and kept away from flammable materials or surfaces. Flue Cleaning: Regularly clean the flue to prevent buildup of creosote, which can cause chimney fires. Proper Ventilation: Ensure that there is proper ventilation in the area to avoid the buildup of harmful gases like carbon monoxide. Compliance: Check your local fire codes and insurance policies to make sure your DIY stove is compliant with safety regulations and covered by insurance. Regular Maintenance: Keep the stove and all components well-maintained to ensure optimal performance and safety. Your safety and the safety of those around you should always be the top priority when using a DIY stove. It's great that you are aware of these potential hazards and are taking steps to mitigate them!

[@FlorentCurk]

Hey ! Looks really smart and a really good build ! But why are you putting a coil + a tank of water around the smoke pipe ? Why both ?

[@lmtn]

Great question! The coil and water tank around the smoke pipe are often used for two reasons: Heat exchange: The coil can act as a heat exchanger, helping to capture and circulate heat from the exhaust gases. This increases the overall efficiency of the stove, allowing more heat to be used for warming the space or water. Water heating: The tank of water is likely there to store heated water, either for direct use as hot water or to be circulated through a system for heating. Combining both the coil and the water tank maximizes the heat transfer from the smoke pipe, which is normally wasted. In short, it's a design choice that aims to make the stove more efficient by using the heat from the exhaust gases in multiple ways. Does this help clarify why both are included?

[@carlospetre4868]

Excelente!! Felicitaciones 🔥😎👌👍

[@lmtn]

Thank you for your interest in watching the video and for your very useful comments. We will try to improve the product better. We hope to receive many positive comments from you. Thank you.

[@carlospetre4868]

​@@lmtnAbrazo cordiales desde la ciudad de Córdoba, Argentina!! 👍😎

[@davidlawrence7765]

The system is great! Spot welding everything, not so much... Dail in and run a worthy bead 😂 Worried about heat distortion, practice back stepping!

[@vovgz3346]

Вау!!!! За трубу отдельный лайк!!!! :)😊

[@dannmann17]

That was awesome. 👍🏻🇺🇸

[@lmtn]

thank you very much have a nice day

[@den_lew]

very nice work!!!just to know water to recycling at fire and back in bucket must be in higher place of the fire?

[@lmtn]

Yes, thank you for your interest as well as your encouragement and opinions. We will follow your opinion and if you have any additional comments or contributions to make it better, don't hesitate to leave a comment below. Let's build it together, right? Thank you

[@hofonseca]

Muy buena esa idea, es tuya ? o es algo comun de construir en tu pais? de igual forma, felcitaciones gran trabbajo!!!

[@paullewis252]

Looks pretty good, but how did you weld the underside of the flue?

[@lmtn]

thanks for your comment! I used a specialized technique for that. Have you tried welding flues yourself? I'd love to hear about your experience.

[@jamshaidgsbm6576]

Masha Allah Good work

[@lmtn]

شكرًا جزيلًا! نحن سعداء لسماع أنك تعجب بالعمل. إذا كان لديك أي أسئلة أو احتياجات للمساعدة في المستقبل، فلا تتردد في طرحها. نحن هنا لمساعدتك دائمًا.

[@kanwar061]

Good job recycle reuse way to save our planet earth

[@lmtn]

Thank you for the kind words! Recycling and reusing truly make a difference. What other creative ideas do you have for sustainability?

[@davedunn4285]

Nice build

[@lmtn]

Thank you for your kind words! I'm glad you liked the build. If you have any questions or if there's anything specific you'd like to know about the project, feel free to ask. I'm here to assist you further!

[@davedunn4285]

thank you i would love the plans if possible

[@hamiltobiermann2333]

Excelente trabalho, parabéns!

[@lillybee2877]

Very cool wish I new how to use the tools ❤

[@lmtn]

It's great to see your interest in learning how to use tools! Working with tools can be a valuable skill that opens up many possibilities for DIY projects and creative endeavors. If you're interested in starting, you might want to consider taking some introductory classes or seeking guidance from experienced individuals in your community. Learning how to use tools safely and effectively is an important first step. With practice and patience, you can develop your skills and embark on various exciting projects. Don't hesitate to ask for advice or look for local workshops or tutorials to get started on your tool journey!

[@ДмитрийЛошкарев-э2и]

Вода на кран это конечно хорошо. Я так родителям завел теплые полы. Достаточно поставить краны дополнительные на входе. И сделать отвод. Кондиционерная трубка 15 метров длиной. Одной такой трубки хватает на площадь 6-8 кВ.м. Я использовал две. И утеплил ванную и кухню. Результат 👍

[@lmtn]

Итак, спасибо, что поделились, я попробую применить это в следующем видео. Вы из России?

[@Dubwarriors03]

Hello, good job, i like it. What kind is your tool for Welding ? I want this one. Looks like easy to use

[@lmtn]

thank you very much our hganf tool is also very simple if you want to know the details, you can leave your information so that I can explain specifically to you

[@XiaomiRedmi-ee7vq]

За работу лайк. Но, вот интересно посмотреть видео, кто и как чистить будет трубу дьімохода? Да, и в каком состоянии шланги после закипания водьі?

[@lmtn]

Спасибо за лайк! 👍 Да, видео о чистке дымохода действительно было бы интересно. Это важный процесс для безопасности. Что касается шлангов, они должны быть в хорошем состоянии, чтобы избежать утечек после закипания. Ты сам планируешь делать такую чистку?

[@XiaomiRedmi-ee7vq]

@@lmtn Уже чистим...

[@JayRSwan]

Nice! Now run that hot water through a heat extractor and recover that heat energy also.

[@lmtn]

Great idea! Using a heat extractor to recover energy from the hot water is an excellent way to maximize efficiency. It really helps to make the most out of the heat generated. Are you planning to incorporate that into your setup?

[@JayRSwan]

@@lmtn Mine will be more like yours as i'll be heating a pool with it. I am planning to put the coils in the burn chamber, though, as I have a fresh supply of cooler water from the pool to keep the pipes cooler. If i can figure out how i would like to do more of a boiler style inside the burn chamber... im just not skilled enough to do it that way, so I'll prolly just stick with coils.

[@FoxMarrion]

Thx Russia,from American.

[@lmtn]

Thank you so much for watching and for your kind words! Your support means a lot to me and motivates me to keep creating even better content. I hope you'll continue to support and visit my channel regularly in the future. Don't forget to subscribe to catch all the latest videos! Thanks again, and have a great day!"

[@myerax]

yes very good. only 2 things i would like to add. when you bend a copper pipe by hand you can use i tool to prevent deforming at the end. you insert a bending core tool. also i think you used the wrong plunbing fixtures at the ends of the pipe creatining a slight bottleneck

[@lmtn]

Thank you for your feedback and insights! Using a bending core tool to prevent deformation at the end of a copper pipe bend is indeed a helpful technique to ensure a smoother and more uniform curvature. Additionally, selecting the appropriate plumbing fixtures at the ends of the pipes is crucial to avoid any bottlenecking or restrictions in flow. I appreciate your attention to detail and will make sure to consider these factors in future projects. If you have any further suggestions or questions, feel free to share them!

[@medmedd-p7c]

Gratias tibi tam lepide ac magnum officium, multum a te didici. Etiam canes amavi etiam si eas diutius non videremus.😘

[@lmtn]

Gratias ago tibi pro tuo genere verbo! Si quaestiones habes aut aliquid dicere velis, libenter auxilabor. Etiam canes sunt amici fideles et nobis multam laetitiam afferunt, etsi interdum diutius non possimus eos videre. Si amor tuus ad canes extenditur, fortasse possis communicare tuas experiences aut quaestiones de canibus, et gaudebo auxiliari!

[@lmtn]

Gratias tibi! Studere et discere semper bonum est. Et canes sunt amici fideles. 😊 Si habes ulteriores quaestiones vel auxilium quaeris, libenter tibi adiuvabo. Bonam diem habe!

[@harshtruthengineer1382]

Very good mate

[@lmtn]

Thanks a lot! What other projects or ideas do you enjoy working on?

[@АндрейГущин-м6к]

Для прочистки дымохода,наверное,вварить резьбу под пробки кислородных баллонов,либо у токаря.Сделал себе ,после подсказки жены.❤

[@lmtn]

"Отличная идея! Звучит так, будто вы нашли отличное решение для прочистки дымохода. И иногда лучшие идеи приходят после подсказок супругов. ❤️ Спасибо за ваш комментарий!"

[@susanapamplonaruiz8850]

En este me hice un poco lio solo necesitaria una estufa para poder cocinar y dar calor a una lonja de 27 metros cuadrados ...si quieres calentar agua puedes poner la perola encima y son seria tanto trasto no ???? Me perdi haciendo este 😂😂😂😂😂😂😂 me ha encantado descubrirte cuando le enseñe s mi hermano veras como le molas tambien . Te pometo que algun inverto tuyo intentare contruirlo despacio y con buena letra , gracias por tu imaginacion y llevarla s este mundo de los video 😅

[@lmtn]

¡Me alegra mucho que te haya gustado! 😊 No te preocupes, a veces es fácil perderse en los detalles. Una estufa sencilla puede ser perfecta para calentar una lonja de 27m² y agua. ¡Estoy seguro de que tu hermano también lo encontrará genial! Gracias por tus palabras, ¡mucho ánimo con tu proyecto! 😄

[@denisdufresne5338]

Il faudrait des plans détaillés et des explications sur - pourquoi c'est fabriquer ainsi afin d'éviter les problèmes et les dangers potentiels. - principe de fonctionnement afin d'éviter les problèmes et les dangers potentiels. Merci.

[@DonCarlione973]

Great idea bro 👌🏻

[@lmtn]

Thank you! I'm glad you liked the idea. If you have any questions or need more information about it, feel free to ask. 👍🏻😊

[@Ali.Alsamare]

Very nice Very good جيد جدا ورائع 🎉

[@2881ale]

Greta job

[@lmtn]

Thanks a lot! I appreciate it! What type of projects do you enjoy working on the most?

[@jared4670]

Really like the idea. Though i suspect that this would only be suitable for wood and not coal as coal may melt the metal? I used a simple steel grate last winter instead of cast iron for my stove in the garage and it melted from the coal.

[@lmtn]

You're correct in your suspicion. Coal burns at higher temperatures than wood, and using a simple steel grate may not be suitable for burning coal. Coal can indeed reach temperatures that are high enough to cause steel to melt or warp. For burning coal, it's recommended to use a grate made from materials that can withstand the higher temperatures. Cast iron grates are commonly used for this purpose because cast iron can handle the intense heat produced by burning coal. If you plan to burn coal regularly, it's a good idea to invest in a quality cast iron grate designed specifically for coal-burning stoves. This will ensure the durability and longevity of the grate, preventing issues like melting or warping. Always refer to the manufacturer's recommendations and specifications for your stove to ensure that you are using the appropriate materials for the type of fuel you intend to burn.

[@timatiosclash0583]

Good job!

[@lmtn]

"Thank you very much! We are happy to receive your positive review. This will be a great encouragement for us to continue providing quality content on our channel!"

[@muhammadraufsiddique4038]

❤from Pakistan

[@maltidevi8450]

Awesome! Where did you get those drums from?

[@lmtn]

I'm not the creator of the video, so I can't provide specific information about where the drums were sourced from. However, you can often find used drums like these from industrial suppliers, recycling centers, or even online marketplaces. Just make sure they are clean and safe to use for your project.

[@kittykidsdoapham3473]

Thanks. ❤

[@swattfish]

Nice welding!

[@lmtn]

Thank you! I really appreciate the compliment. Welding can be a fun and rewarding skill. Do you do any welding yourself?

[@karlsonkab51]

beautiful welds !

[@lmtn]

Thank you! I'm glad you like them! If you’re working on your own welding project or need any tips, feel free to reach out. I'd be happy to help!

[@RichardChandler-v8i]

The principle is sound and a nice design but you need lagged copper pipe not that cheap plastic hose where hot water is concerned.... You need a lagged bigger tank with a lid and SAFETY valve.... also you need shut off valves at every pipe also a fast fire putout system for safety..... last thing you cant weld for toffy and where is your mask?? People watching this video always have eye protection when welding or you will go blind...... But great video and has given me some great ideas that can be implemented in my own project for SHTF and off grid living.....