DIY HONDA AWD Trailing Arm Mod

BUILT2DRIVE MERCH ARE BACK ! !
built2drive.bi...
Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
STREET2TRACK
www.street2trac...
REDZONERACE
www.redzonerace...
/ redzonedb8
/ redzonerace
CJSWIRING
www.cjs-wiring...
/ c_zapien
KTUNED
/ ktuned
k-tuned.3dcarts...
Y&S Lexan
/ y_s_lexan
JBTUNED
www.jbtuned.com/
/ jbtuned

[@jdm_king27rx76]

Hey bro appreciate you making all these videos Helping the community learn

[@nestorurias9298]

THAT HARD RAIN WHEN YOU FINISHED WAS LIKE THE WORLD GIVING YOU A ROUND OF APPLAUSE 👍🏼👍🏼

[@robertvega4136]

i've been following this channel for a long time and i've been driving aw11 and sw20.i keep on waiting and hoping he goes aw11/sw20 kswap then now im married and got a son force me to move to honda for 4 seater cars and this is the best 4 seater project cars.... thank you so much bro.

[@nitrous07me]

You need to keep your torque wrench in its case. It’ll keep it within calibration so it doesn’t get bounced around

[@inzanegarage9318]

You're channel is way under rated bro!! You deserve way more subscribers, with all the hard work!! If I'm not mistaken you sparked the whole awd honda game!!! Much respect brotha...

[@beezie2566]

Purple power is probably the best store bought degreaser you can buy my guy. Give it a whirl. Wal mart and dollar general sells it

[@jamolepley9340]

Hey bro check out humble performance they have some pretty cool stuff they're making and putting out they have actually a special piston for the d-series to get it up to 10 to 1 compression check it out

[@631garage4]

Brotha if you could do this you can definitely build a and motor from the ground up you got this

[@NealDownBtch]

That Jig doe, That’s pretty sweet bro! Doesn’t have to be pretty, just good and functioning!

[@mariobarbosa3095]

Dana my mannn always turn the crank befor starting to pull out and engine. Remove sparka plugs while turning the crank to at least hear if you get compression

[@YoungStatic]

Should of been the first thing to check but when i saw this engine it was almost Closing time. Spur of the moment move to try and take it out

[@ernestomedrano7625]

Yo Static that's why before I even bother pulling up the engine I drop that oil pan... so I don't do work in vain... love the content bro keep it up... much love...✌✌✌

[@YoungStatic]

Should of been the first thing to check but when i saw this engine it was almost Closing time. Spur of the moment move to try and take it out

[@ccodydc]

Thinking out of the box production mode

[@tootallrichtall7924]

Use this chemical called nu-brite to remove the oil/grease for the engine. It works great

[@cbdreamer1709]

Sad ending. Appreciate you time son!

[@cky2k244]

Tekton tools are absolutely amazing. Please look into them!

[@upfactoryracing4148]

Nice throw back clip! Love those EF sedans!

[@dudleyperformancewerks7055]

Snow isn't too far away here in ohio, so we need some good positive winter content bro. Keep pushing 🤙

[@Medinabros2007]

Muy bien Bro saludos desde Honduras👍👍👍

[@impactajuvenile]

I think Dana meant hit the “Like” button cuz we already subscribed brother? That’s why we’z watchin up in here

[@malenialvarado8958]

Stupid is stupid.

[@WideOpenThrottleGarage]

That crv table tho! I use mine all the time lol

[@hectormlugo9631]

Wide Open Throttle Garage how did u make it send me a link

[@pnw_element9822]

This man stay putting in work Young Kampuchea 👍🏽

[@hspeedpro577]

Note to self, crank motor by hand before I attempt to remove🤔

[@YoungStatic]

Should of been the first thing to check but when i saw this engine it was almost Closing time. Spur of the moment move to try and take it out

[@majorkin19]

Good shit bro👌👌👌, your content is always A1, detailed and step by step if needed I like that keeping everyone on the honda community wrenching 👍👍👍

[@Questchaun]

My man got a jig for it. BOSS!

[@yadieldiaz6395]

Awesome content like always Dana keep doing what you doing bro. To bad on the H motor

[@tristendecker5824]

I had the same problem with the eBay rings twice so now I just buy Hastings

[@hectormlugo9631]

Is there a DIY on how to make a table like that

[@brokemangarage729]

Dammm playboi you is killing it!!! 👍👍👍🤙🤙🤙

[@rickyharrison4431]

Love the vids mate Love the music at the end too epic mate

[@itsmrfaull]

It’s time for another ef sedan!

[@AJIMPORTS]

Damn you can't catch a break with these engines. All that work pulling the motor for nothing.

[@gemini3558]

Awesome Dana !!! Mate thanks for sharing dude !!! Please keep your new torque wrench 🔧 in its case and it will last you forever , just get it recalibrated every now and then cool 😎 peace ✌️ 😜👍🇦🇺

[@YoungStatic]

My snap on, never had a case lmao.

[@gemini3558]

YoungStatic hehe haha lol 😂 😜👍🇦🇺

[@brewskywayne3716]

🔥 Fire 💯💯💯💯👍👍👍👍

[@giovannifigueroa6307]

Lol hears a car in the distance "Hi I'm static" "Spool!?" "Yea so if you wanna do...." Such a car head lol

[@jaredthisdelle5617]

Learning Honda's ever vid u upload just like the other guy jdm king said young static (teacher ).im def going to build another honda just cuss one more for my fleet of cars that and I miss my old civic I use to tear shut up in my old home town the cops loved me ...lol was up Joe

[@leopaulevans7573]

hey do you hav any z6 or y8 intake mani

[@junkyard4999]

Thank you for.......shit Static you know the deal bro!!

[@budgetbuild914]

Great video....everyone go to the last video Humble performance posted and put on the comments that YoungStatic deserves to win the Christmas gift they are doing YoungStatic is a good guy and deserves a nice gift

[@thongdykhamta7382]

S one sells a kit but idk the prices. Good job tho. Im pretty sure u already know

[@YoungStatic]

Kits are 600+ from s1 and hcp kit starts at $1400.

[@jasonfairley3854]

Let’s gooooo

[@bos200409]

Please clean the surface better before welding

[@joshremy3826]

non crucial stuff like the rods or crank lmaoo

[@seanpek9]

With all the awd options I wouldn’t do this. Between time and money spent you could get a s1 built or hcp arms. S1 even has a do it your self that’s way easier. Solid material and some real abuse proven products.

[@YoungStatic]

Cost . I’m a diy’er. My car had the same half n half arm and PROVEN. Daily, raced, long travels and my alignment still went in spec.

[@seanpek9]

Proven what your car always messing up or you’re changing motors because of have ass issues. Which I don’t believe is your fault, but don’t say proven. Proven is s1 built proven is HCP. You do your things but something I don’t promot, buy the arms people. Be responsible. The average power now a days is 600+ is it worth taking that chance on some cut up arms? ?

[@hectorb1721]

YoungStatic you interested in some low mile B series AWD gear STACKs I went FWD2AWD conversion.

[@YoungStatic]

I’m going fwd to awd gsr stack in mine. Thanks though

[@keyz147]

How much would you sale them for vs how much if i sent you some to be done??

[@YoungStatic]

Awd kit from hcp starts at $1400. Finding wagon rta is about 4-500. Diy to stock rta ranges 3-400 depending on if you fab or buy Hub spacers.

[@kkkevv224]

Tough luck on that H

[@Cg6_4oh8]

🔥🔥

[@MoeGang96]

💥

[@hondaservicecenter]

Would you rent me that jig haha

[@jakeoddmonic2956]

Nooooo h22 no goood

[@jamesmeeks8949]

👊🏼

[@pgarrett6665]

Cute 🐕

[@mrincredible2330]

That’s looks dangerous 🙄

[@kevinjohnson1958]

6th baby

[@seantou]

First

[@eduardochavez8360]

1st comment boiii

[@JS-ru1wh]

the plane the plane boss the plane!