Learn how to change the oil on a Royal Enfield Classic 500cc motorcycle. The same procedure will work on a Royal Enfield 350CC and the Royal Enfield Bullet with minor modifications. Remember to get the right fuel for your l.
Пікірлер: 41
@usurpinesusanti31492 жыл бұрын
This language everyone will understand. Nicely done !
@alexsandovallapostol99983 ай бұрын
Well done ! no mindless chatter ! good video quality !
@Makermook4 жыл бұрын
Great video. Visually well done, nice background sound, and no blah-blah needless commentary.
@justincutajar74243 жыл бұрын
Bro your video was amazing! High quality, clear and concise and entertaining. Extra points for the classic military in the background (same as me)
@SUNSINSTUDIOS3 жыл бұрын
Thank you! Appreciate the feedback. The green is the wife’s motorcycle, I almost went blue or sand but am glad I went with chrome (though she gets way more compliments… I’m sure it’s the bike)
@gregburke7737 ай бұрын
Step 1 - ride bike for 10 km's. A 2 minute 'warm up' is nowhere enough. Bolts for mesh screen are 8mm - same for oil filter cover. Removal of oil filter - there are two O rings to be accounted for and replaced. While draining oil, rock machine front to back, and tilt from side to side (slowly) to get as much oil out as possible. After replacing the drain plugs and adding the oil, while the engine is running, get back under the thing and check for leaks on your various drain points. Wear rubber gloves when changing oil - saves burns, and that stuff is not so good for your skin. If you have a sump guard on your RE Bullet, remove that before you go for your warm up ride - saves you getting burned removing it (ask me how I know)! My comments come after 2 years and 29,000 km's on a RE Classic 500
@MSR_Robi_Garage3 жыл бұрын
Hi Sunsinstudios, congrats for the neat video and thank you for the tech knowledge you are sharing. I am going to change the oil on my Classic 500 and I found your guide very useful.I like the look you gave to your video-editing. I subscribed your channel. Help growing the channels with RE contents! keep on like that!
@SUNSINSTUDIOS3 жыл бұрын
Thanks for the kind words!
@MSR_Robi_Garage3 жыл бұрын
Keep on doing filmmaking on motorcycles : I am sure you can do awesome riding video! If you want, take a look to my RE Classic engine modified Hitchcoks kit 535 cc, Oil cooler, free flow filter, Dynojet V5 and a custom exhaust. If you like, please consider subscribing my channel ... Enjoy and ride safe!
@david81lop5 жыл бұрын
Excellent video man! 👍
@SUNSINSTUDIOS5 жыл бұрын
David Lopez thanks!
@ahnafalavi17343 жыл бұрын
I have 2009 bullet I’m just wondering if that the same filter that you use in the video?
@SUNSINSTUDIOS3 жыл бұрын
I believe so. Mine is a 2012 and I think classics started production in 2009 (so should be similar)
@Con.D.K3 жыл бұрын
Nice work!!! Thanks!!!!
@SUNSINSTUDIOS3 жыл бұрын
Thanks ! Hope it was helpful!
@jeegarpatel26432 жыл бұрын
Best oil change video bro.will able to change oil myself....keep posting 👍..bro I have classic 500 stealth black with efi and usage is Max 20-30 km a week,shall I use mineral re oil or semi synthetic?i prefer to change 6 monthly
@juanito6147 Жыл бұрын
Great job
@bebop25994 жыл бұрын
Nice vid. Any torque values for the all the bolts featured in the video?
@Kiret123 Жыл бұрын
I know someone with one of these, and oil is leaking out of the sightglass. is that a common fault, and what usually remedies it? a new seal?
@honkybrookster89784 жыл бұрын
Thank goodness......No yatta yatta listen to me I am a Tosser commentary !....Thanks !
@yardenl19983 жыл бұрын
Great video, just a small questions. Are the copper washers needs replacement? Or is just a clean up to them enough?
@SUNSINSTUDIOS3 жыл бұрын
If you mean the magnetic bolt or other metal washers, just clean and check it (replace if damaged). If you are referring to the rubber seals, then yes I recommend replacing.
@nischalrana24474 жыл бұрын
Hey mate u did a big mistake u didn't removed the 3rd bold where the crank oil is stored 😕😕😕😕... half litre is still there in engine which is old oil get it checked brother...
@dhananjay5554 жыл бұрын
Not necessary.it harms crank. There should be 400-500 ml oil always in the crank case chamber.
@nischalrana24474 жыл бұрын
@@dhananjay555 Mate when you add new oil new oil gets there without any problem... That nut is made to be open to drained out
@bijojoseph16592 жыл бұрын
@@nischalrana2447 u correct 👍
@bijojoseph16592 жыл бұрын
Yes correct 👍
@pavankumar-kp1wb4 жыл бұрын
Great...can you please share the link from where you purchases the spanner..
@SUNSINSTUDIOS4 жыл бұрын
Hi! I got the wrench a few years ago at a local hardware shop. Sorry no link :(
@yogiraj7824 жыл бұрын
How much quantity is needed? Is liquy moly full synthetic good ?
@SUNSINSTUDIOS4 жыл бұрын
For the classic 500 made sure to have 2.5L but as you can see the best way to know how much to add is by the engine oil window. Yes I used full synthetic. Dug Dug
@yogiraj7824 жыл бұрын
@@SUNSINSTUDIOS thanks man.. appreciate your help.. how much in general you need in your 500 classic. 3 lit or 2.5 ?
@SUNSINSTUDIOS4 жыл бұрын
I think 2.5L, but if you have 3L you can add when it gets low (from leaks lol)
@TheMojo783 жыл бұрын
Hi does a brand new classic 500 come with all the tools necessary to do this oil change yourself?
@SUNSINSTUDIOS3 жыл бұрын
Hmmm good question, I believe so. Mine doesn’t have the full kit (lost in the garage) but looking at google it seems you should have all the wrenches needed.
@himalayanamansinghchoudhar87514 жыл бұрын
😉👌🏻🇮🇳
@ahnafalavi17343 жыл бұрын
Is this for 2009 bullet ?
@SUNSINSTUDIOS2 жыл бұрын
No it was a 2016 with the green one in the back being a 2012
@kristenkumar83152 жыл бұрын
You removed the primary drain plug but not the secondary. Also o ring not replaced
@philrobinson23273 жыл бұрын
Don't follow the instructions on this video. There are 2 drain plugs plus the sump filter. Also the oring for the filter was not removed!!