DIY how to float banshee stator

I know its not the best, i had someone record me on my phone so there is NO editing, so this is straight up how long it takes. Most go faster, been a while since i've done one. Have a good one guys!

[@dougweymer1832]

Such an amazing video. I literally have been watching this entire channel to help me through my banshee build. So many people do half @ss work but South Texas banshee takes the time to do nice clean build! Thank you for everything you put on here for us!

[@kevingalindo1]

361-243-0431 Call or message me to talk about that harness sir.

[@mathewdavila7719]

The banshee man is back ! Time to watch these new videos during lockdown!!

[@kevingalindo1]

Mathew davila lol. I'll be back soon with some videos on assembling and entire bike.

[@ronaldjohnson4971]

Dude I've been able to do everything to my banshee myself bcuz of your vids. Thanks you've saved me soo much!!!

[@kevingalindo1]

John Snatchko very much appreciated !!!!

[@kevingalindo1]

This allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.

[@YIRMASTER]

What kind of battery would you use and size of it, where would you mount it and how would you connect it? Love to see a tutorial on that or just a finished one pointing out what you did.

[@chrissauer6159]

Very informative! Do a video with the rest of the setup, connection to the rectifier and lights.....etc!

[@johntucillo5375]

Would love to see a video on this with the battery hookup before I finish my build

[@nathanielpena4474]

what happens if you run an led light bar without doing anything to the stator or getting any conversion kits ?

[@johnnyflores7032]

@@nathanielpena4474 youll burn the led

[@islamaustralia1]

Welcome back Kevin i hope you and your family are all well keep up the banshee videos👍

[@fatgabesvtcobra0397]

Thanks man I got a banshee for 800bucks and with your videos I got running great starts 1st kick every time n I learned so much from these. Stay safe.

[@SEEtheREPLAY]

Nice to see you back. You remind me of me, back in the day when I used to fix cars. Doing it right the first time. Love it bro!

[@marcusdowney71]

Maybe solder the new yellow wire onto the black one you are removing (at ~ 13:27) and when you pull the black one out, the yellow one is installed in the factory loom for you. it may work for ya. Great videos and subscribed!

[@dzolalaw]

You’re the best. Love your videos. Very informative.

[@shad3654]

Good to see that you are still doing good man hope all is well during these times. Will you ever go back to doing raffles again?

[@bansheemittenriders7060]

Glad to see you are posting new content!!

[@kevingalindo1]

Banshee Mitten Riders more to come!

[@mrrosadogarage7920]

Excelente video hermano.

[@juanmolina6]

Thanks for you videos man big help know wanna kno what kind of regulator can I used

[@tonyj5408]

Why would you need to float the ground on the stator?

[@kevingalindo1]

Tony J it allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.

[@tonyj5408]

South Texas Banshee I got you, Thanks Kevin keep up the good work

[@tonyj5408]

South Texas Banshee I bought your leak down tester and it works great , thanks brother its a quality tester , stay safe out there buddy

[@williamsaguilar2379]

Perfect brother

[@evanwilliams2602]

Yo where you been my man. I ordered a wiring harness off you the other day.cant wait to get it

[@andrewkelley9667]

Can’t wait to see more vids!! Hope your doing well

[@charliepapa5835]

Love your videos man....any way u can do 1 on installing and removing crank bearings from a crank?

[@RTrevino16]

Kevin, can I still run leds without a battery if I floated the ground already?

[@Spencer.76]

I would like to know if this is possible as well. Thanks Kevin. Blessings to you and your family.

[@ericramos5283]

Hi, everybody I want to know that too?!

[@joelmaassen7706]

Hell ya brother great video as usual keep em coming

[@Boosted86]

Flip that rubber boot around the other way, tube first so it’s easy to pull through the case :)

[@Handsofskills]

I bought a Ricky stator with floating ground but see no videos on the installation. Do I snip the ground like you did or is it plug and play?

[@ericbanks4537]

After u float ur stater so u hook them all back up to same spot u took them off of or do u have to get different stuff to run led headlights

[@kevingalindo1]

Here’s a full dc setup that can be used after your stator is floated. All years available comment here or text “DC HARNESS “ to 361-243-0431 www.ebay.com/itm/174757957798

[@Chadthemadlad23]

Does this work with an 83 Honda atc 200 if I want dc instead of ac

[@johntucillo5375]

Does it matter if you solder the wire back to the post. or solder the new wire to the post

[@thomaswicks5400]

Im rebuilding a 87 banshee im putting new stock cylinders on it but i bought 20cc domes i live in st george utah 2000 plus elevation what kind of gas should I use. Please and thank you

[@everythingloud4068]

Hey man what would I need to do for a fuel injection setup for my 87 banshee I live in Montana and ride from 1700ft to 8,000 feet in 45 minutes just curious what I would need to do or what it would cost to have done?

[@krismorrison1953]

Kristopher Morrison on fb great job bro any videos on kicker gear replacement

[@markcasillas2166]

Hello sir my names mark I have quick question,what size are the fuel lines on the banshee I thought 3/8 or 1/4 but not sure lol please help

[@streetrossi937]

What is the biggest boater you can get stock or a Yamaha pay the and do they only call with 2 stroke inches

[@tito02924]

Hey man I got a 2003 banshee 350 and idk what’s wrong with it I tried to work on it but I just cant I’ll be glad to see if you can! Just text me once you see this

[@jocelynlapointe6929]

What's the size of the bolt that hold the pickup coil in place?

[@kevingalindo1]

I believe they’re M4x.07 screws

[@gavinbarham542]

What voltage battery is the stock stator capable of charging? 6 volt or 12 volt?

[@hamaadyousif7618]

Shall i cut the black wire?? What is the purpose of the black wire??

[@jonpaulstevens8976]

Is there a way I can test to see if my stator is floated already??

[@wr4268]

Will it be the same on a 01wr426 stator

[@pitbikecookracing3324]

Can that work on my blaster?

[@jesstaylor3200]

Do you know the symptoms of a stator going bad? When my basically stock banshee gets hot it dies. PUTTING, FLYING doesnt matter iy just starts cutting out and 100% dies. Not a fuel issue, no blogging definitely a spark issue. Let it cool for 10 minutes and fires back up and rips till it gets hot...then dies. Wasn't sure if I should replace the stator or look elsewhere for issues.

[@mannieghee1370]

Ever find an answer? I’m having the same problem

[@jesstaylor3200]

@@mannieghee1370 I tested the stator and it passed the ohm test. But after changing the coil and cdi the banshee still did what I originally commented. I replaced the stator with a New Genuine Yamaha Stator and it fixed the issue.

[@mushmanist]

Do you have to buy a certain output stator or you can use your regular oem stator?

[@johntucillo5375]

Ever find an answer to this

[@krismorrison1953]

Never mind found it lol

[@LamzLamz714]

What's the purpose of this??

[@gompie250]

Its for putting a battery on the banshee to install LED lights

[@kevingalindo1]

Lamu Taafua it allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.

[@LamzLamz714]

Ohh sweet..can u post a video of the full set up?

[@kevingalindo1]

Lamu Taafua I'm doing a DC road legal harness for some guys out on the Virgin Islands. Give me a little time to get it all together and I'll cover it for y'all.

[@LamzLamz714]

@@kevingalindo1 sweet bro...keep posting ur vids...they're awesome