DIY How to Install Hardwood Flooring

With the help of a professional tool rental and my tips you too can install like a pro! I will show you every trick in the book to get a perfect finish most installers would be jealous of!
#justdoityourself #lovingit #perfecteverytime
Shop Jeff’s favorite tools and great products and help support our next project!
► Shop Wayfair 🇨🇦: www.jdoqocy.com...
► Shop Wayfair 🇺🇸: www.jdoqocy.com...
► Shop Amazon 🇨🇦: geni.us/mlVE (Amazon)
► Shop Amazon 🇺🇸: www.amazon.com...
► Shop Home Depot: homedepot.sjv....
► For discounts on flooring, paint, hardscapes, soundproofing and more visit our website:
homerenovision...
*****Be sure to use the coupon codes before checkout
Did you know we launched a newsletter? Sign up here: homerenovision...
🔨 SHOP TOOLS 🔨
Tape Measure - geni.us/TapeMe...
DeWALT Mitre Saw - geni.us/MiterS...
Level - geni.us/BeamLe...
DeWALT Circular Saw - geni.us/Circul...
DeWALT Sawzall - geni.us/Recipr...
DeWALT Drill - geni.us/Cordle...
Makita Jig Saw - geni.us/TopHan...
Oscillating Multi Tool - geni.us/Electr...
Need Answers or Advice for your DIY Project?
BECOME A DIY MEMBER NOW!
Become a DIY Member by clicking the “join” button beside the “subscribe” button - / homerenovisiondiy
► Get FULL access to me and my team for Q and A’s in the DIY Crew Forum
► Participate in monthly LIVE streams for live consulting and Member support!
SUBSCRIBE TO OUR CHANNELS
► Subscribe NOW and hit the bell to get notified about new videos - / homerenovisiondiy
► Subscribe NOW to our 2nd Channel Reality Renovision - / realityrenovision
► Subscribe NOW to our 3rd Channel Home Renovision en Español - / @homerenovisionenespañol
FOLLOW US ON SOCIAL MEDIA:
INSTAGRAM: / homerenovis. .
FACEBOOK: / homerenovisi. .
PINTEREST: / homerenovis. .
TIKTOK: vm.tiktok.com/...
Music in this video may be used from Epidemic Sound. Download free copyright songs here: bit.ly/epidemic...
WANT TO WATCH MORE VIDEOS??
Watch our most popular videos:
► How to Tile Over Tile
• How To Tile Over Tile
►How to Paint Like a Pro
• DIY How to Paint like ...
Watch our most popular playlists:
►Our Latest Videos • Jeff's Newest Videos
► Drywall Masterclass Playlist
• What You NEED to Know ...
Produced by: Home Renovision DIY 2020
Video & Editing Services Provided by:
Subdivision Film LTD.
www.Subdivisio...
Disclaimer:
Videos produced by Home Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Home Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Home Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code. HomeRenoVisionDIY may earn an affiliate commission if you purchase something through recommended links. #commissionsearned

[@HomeRenoVisionDIY]

Click this link to see our in depth tutorial for floating floors like vinyl or laminate. Cheers! kzbin.info/www/bejne/hXvUnGWfiMSdr7M

[@mrpenn4613]

Do you have a video on doing a hardwood to tile transition? I'm considering putting tile in my kitchen, when I re-cabinet it, but transitioning to hardwood for the main room and hallway.

[@Chris-Alia]

You kept saying "this flooring"... but it's not clear. Exactly what type of flooring did you use? Depth of finish, etc, engineered, etc? Thanks

[@ፍቅርይበልጣል-ኈ8ኈ]

What kind floor is good for the basement ?

[@coolestdogintheus]

@@Chris-Alia Looks like 3/4 inch by 4 inch oak with random lengths.

[@HardNHandy]

Not for nothing or two or to sound any type of wayI have been a member for over a month and have not got any of the perks I was told I would

[@mattfederhofer4907]

A lot of video creators use the easiest project (perfect square room and easy cuts). You addressed the hard stuff with detailed explanations. Well done. Thanks

[@alexberry4758]

Personally I think the information was poor. Squaring off of existing hardwood hardwood flooring from an existing room through a cased opening like he does is relying that the hardwood in the adjacent room is square to the hallway or room that your flooring. The actual practice by competent installers is to find the center of the room or hallway on each end. Then snap a center line through the room. Then measure to snap a line for your starting row. This technique he is suggesting is never used and extremely negligent. This dude has no idea what he is doing to be truthful

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@ganjalfcreamcorn8438]

then what? you use an ugly Tmold when the doorway seems arent 90 degrees to each other? he did it this way so the transition from one room to the next looks good with no gaps. this is best way to do it in this scenario. if your floors dont sqaure up to each other then your doorway transition will look like crap.@@alexberry4758

[@TripedalTroductions]

​@@alexberry4758 thank you

[@aidaagha1659]

I can't believe they denied him from being on TV first time around. He's been around a number of years and watching him doesn't get stale in the least. I love how clear he is and demonstrates everything and the little precautions he offers before you start for safety are magnificent !

[@aprilslone4542]

Please don't stop making videos because some people are mad that we want to do it ourselves. I can't afford to call someone I don't make a slot of money. So the option is either I do it myself or stay with the cracked tile that lift up everytime we walk on it. Your videos are very informative and make me feel better about doing it myself. You will have support! Thank you

[@bernarddouthit4647]

This by far the BEST video I’ve seen on KZbin on installing hardwood flooring! I really appreciate the tips about how to use the floor nailer correctly and how to handle a transition from one room to the next. Plus, you starting in a closet was also helpful.

[@TheHairyHound]

38 minutes of captive information. Totally relative to task in hand and excellent delivery. Thank you 👌👍

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@johnconeff5832]

Really enjoyed the video. Here are the time-indexes for things I found useful: 06:30 - Hallway tip, go parallel, not long ways 10:00 - Starting in the middle of the room 12:10 - Tip: Very few tools 15:45 - Tip: Nailer use 18:35 - Tip: Measuring for the wall 21:45 - Tip: Stapler out of nails ... how to tell & avoid, replace staple sooner 26:30 - Tip: PL Premium adhesive & brad nails. Brads only hold it so the glue can cure. 32:13 - Tip: Unset staple keeps tongue & groove from mating, use a knife 37:03 - Tip: Make sure you're happy before you commit. Having it just right is worth the effort.

[@thecleaner23]

Sir, thank you very much for all the amazing videos. I paid thousands to learn from a contractor and I have to say, you have taught me way more than him and it was free. So thank you, ignore all the trolls and negativity, and have a blessed day.

[@HomeRenoVisionDIY]

Will do, glad to help. Cheers!

[@paulbishal9177]

Great video but a few suggestions/criticisms from someone who installed hardwood for over 10 years (taught by someone who did it for over 20 years). The biggest criticism is: you already have a jam saw. You should have cut both jams where the new flooring meets the old. It would allow you to cut most of the way to the old flooring and usually a razor knife and/or a sharp wood chisel will get to the part you can't reach with the jam saw because it is too close to the old. Even if you can only go in 1/8 of an inch you can still cut the wood to eliminate any visible gap between the new wood and the jam. No need for the adhesive where you change direction. Just use the nailgun to nail through the sliptongue. Using a finish nailer (not pin nailer) eliminates the need for adhesive until you get within about 6" of the wall. The nails are thicker than a pin nailer and will hold the floor down fine. You really should use pieces from different boards for the 1" pieces between the vent and the wall otherwise you can usually tell they are all from the same board from the color/grain. When you are going the opposite way you can just cut them from when you are doing the end cuts. Just cut the 1" piece off first then cut the end cut to the final length. Helps eliminate waste also. If you have a table saw rip about 1/16" - 1/8" of the groove side of a piece of flooring about 4-6" long. It allows you to use it as a beater board to tighten the flooring without taking any chance of the top edge getting damaged like you chance when you are using the hammer. By cutting off the 1/16" - 1/8" it allows the beater board to be pressing again the tongue rather than the top edge. It would also stop from crushing the tongue like it would if there was no groove like if you used a piece of plywood. You say that it can be refinished down the road (which it can be, multiple times usually) but when you have the staple sticking up you cut the underside of the top layer of the other piece which means you would not be able to sand that piece of wood as much as the other boards without going through. One better way is to use the side of a wood chisel (usually 1" or larger so the handle does not interfere) which will drive the entire staple in at the same time. If that does not work then put in another staple about 1" away from the old one, use a chisel to cut the tongue on either side of staple then drive the staple straight down out of the way. You might have to still cut the bottom edge of the other board a little. You need to cut the tongue 1st otherwise when you drive the staple down the tongue can splinter in both directions (like you can see starting to happen in the video) for up to 3-4" in you are unlucky.

[@askinbayindir1491]

Why didn't you use paper under the hardwood?.is it not important?

[@jimgriffiths9071]

Really enjoy the way you explain things. 30 years of handyman experience and I learned a couple of new things! Great job.

[@neilfitch]

Great points about cost to install and the longevity of hardwood. Also some good tips. However if you're installing a 100 year, floor, skip the shortcuts and glue, take your time and do it right. Use paper underneath, drill and use finish nails when you can't use the gun and even drill into the face nail and use finish nails at the wall. Start at the closet and measure ever course to get the transition square.

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@hailuwoldemichael6840]

Thanks Jeff for taking the time to explain how to install hardwood floor. I installed my daughter's bed room with my wife a few years ago. I learned some tricks from this video. Thanks again.

[@amoskumar445]

I have watched so many DIY videos on these types of flooring and this by far is the best and most informative video seen. Thanks for the posting.

[@HomeRenoVisionDIY]

Always glad to help. Cheers!

[@MajorTonkins]

This guys got much longer videos than the other DIY guys but honestly he has a way of hitting on the details that I’m wondering about. Really feels like you could could pause these videos as you’re doing the work and be good even with no experience

[@annelandon7889]

Thank you Jeff for showing me how to install a hardwood floor! The prep work took so long, but after getting the rows lined up straight, my floor went in like a dream.

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@alexmorris6954]

Excellent tutorial. Lots of great info. I've done maybe 1500 SF of 3/4 inch hardwood. After a 10 year break I'm gearing up for another massive project. This was a great refresher course.

[@chevroletgrrl]

I bought a home for a great price but it needs quite a bit of remodeling. I tore the 20 year old gross carpet out to find hardwood floors underneath in need of tlc. A video about refinishing hardwood floors would be awesome. I’m still blown away that you offer so much great advice for free! I’ve binged watched hours and hours of your videos. Thank you so much for making them!

[@HomeRenoVisionDIY]

working on that this spring. cheers!

[@sahmadi1000]

The best I have ever seen!. I love the fact that you show how to deal with the problem areas. This is a true class and not a show. Thanks a million.

[@HomeRenoVisionDIY]

Just trying to show as many tips as possible in a quick video. This way I don't need to make 10 of them. Cheers!

[@tashaanderson2128]

best you have ever seen? amazing the crap a white guy with a power tool can put on the internet and get away with

[@frontierfabricators6703]

For those replacing complete home flooring or many rooms of flooring in hardwood, I recommend using a "jamb saw" to trim up door moldings. It will saw you hours of "on your knees, hand sawing", and when set properly this tool makes very fast, accurate and clean cuts. I use a "Roberts 17076 10-46 6-Inch Jamb Saw". Comes with a case, easy to use and adjust, and not that expensive. There are several other brand names available. I also use and recommend safety glasses with power tools, although they are inconvenient... nothing worse than sawdust in the eyes (for days), worse than sawdust pizza.

[@noahnewsome2050]

Safer and easier and cheaper to use a oscillating saw for door jambs. An installer who works at the same shop caught a subfloor nail with a jamb saw and blew out a sliding glass door and cost the shop 300 dollars. If you need to trim long lengths of base board and for some reason cant pull it up then get a jamb saw.

[@TheKamakuraGardener]

Well done! 👏🏾👏🏾👍🏾👍🏾👍🏾 I re-floored my mother’s home 18 years ago and they still look good! 😉😀

[@HomeRenoVisionDIY]

Hardwood can last forever if you keep the house conditioned.

[@TheKamakuraGardener]

David Vazquez: I suggest you ask your local DIY center for the best advice. It’s been nearly 20 years since I’ve done this.

[@abebouhadir5020]

What can we say! You’re a blessing!! Thanks for this and every video you’re sharing. I hope we can all pay this kindness forward. Please keep it up!

[@Ahyame718]

I agree

[@James-bv4nu]

Just did a townhouse hardwood floor. You touched on just about every situation I ran into. On the very first transition in your video, if you have to transition into, say, existing tile floor, then first run a couple of rows of planks PARALLEL to the transition. And then you can change direction, and butt up your subsequent planks to the first two parallel rows.

[@craigcode7103]

Excellent video,I don't know if it was mentioned but you should purchase your hardwood at least a week before installation and store it in the rooms you are going to floor.This allows the hardwood to adjust to the humidity level of the space,avoiding too much shrinking or swelling after install.

[@haribaraili9673]

Right

[@ricardoappelgren8257]

Craig Code that process is call acclimation and is not 1 week, actually could be several weeks depending on moisture content on hardwood and subfloor, for that you will need to use a professional tool. It seems easy to do , the truth is there are professionals who do this for a reason

[@daniels1293]

@1heavyhammer shows what you know, waited two months after wood was delivered to start it because of humidity issues.

[@ibealion1]

I have two questions: (1) Should the floor be leveled prior to installation to avoid dips in the final product? (2) Is there an underlayment product that you could put under the hardwood to help deaden sound for the lower level below the hardwood floor?

[@ljones4025]

Not him, but the answer to 1 is yes the surface you are installing solid hardwood on should be level, with all valleys, peaks, holes in subfloor repaired first to avoid problems later. The answer to 2 is if you are installing hardwood planks over a cement floor or over a crawl space than use felt paper (15lb+) to help prevent moister from reaching the underside of the hardwood. If installing on a living level that is above an underground basement use flooring paper. You can skip the paper or felt if you are installing on a level that is above a living level that does not have humidity problems, although some hardwood manufacturers now insist as part of the warranty that paper be used even in this situation.

[@ibealion1]

@@ljones4025 Thanks! I'm asking more about sound-deadening... thinking about a first story above a basement. I want to install hardwood in the first floor, but I want to minimize the sound transfer to the basement below. I'm wondering if there is a product that is both (A) safe for hardwood and (B) effective for sound-deadening.

[@shericreates]

I am so excited! On Craig’s List someone had a pile of free wood - and I mean a pile! There was beautiful trim work, railings, and so much more that filled our truck. The best? Hardwood! There was beautiful oak flooring! I could only get about a 8x6 area but he said he had more under the house. Our truck was full so we left. A month later I called the guy and asked him if he had any flooring left. He said sure! Under his house was so much flooring! Some bundles were brand new! I just wanted enough to make a staging area for my furniture I sell. Now I’m thinking of doing my dining room. It’s absolutely beautiful! I’m so thankful you made this video!

[@ellesar04]

To prevent messing up the tongue and groove, I like to use a scrap piece of my flooring as a tap block. it locks together and protects it from deforming and making an easy fit with the next row.

[@adventureescape1929]

I second that.

[@zachattack83]

You don’t have to slam the poop out of it a little tap is all you need.

[@bhriz775]

This is hardwood not laminate 🤣

[@rjdunndeal]

Thank you I am redoing my kitchen floor and I have already done my living room and my bedroom and it was very difficult because I did not know the tricks that you have so thank you very much I have learned a lot from your video do more thanks

[@YeekTV_Atlanta]

I’ve watched hundreds of DIY videos and the way that you teach is by far the absolute best! Greatly appreciated!

[@HomeRenoVisionDIY]

I love the solid wood flooring. This is my favorite option if the house can support the investment. Cheers!

[@pharoahakhenaten6630]

I just put in laminate floors in one of my rentals (economics). I agree a natural hardwood is beautiful. Love your channel Jeff, cheers from Michigan

[@HomeRenoVisionDIY]

Hardwood is always awesome but not always the most practical choice. Cheers to Michigan.

[@ruslanotarov9727]

Don't you have to re-screw the plywood after the demolition?

[@zamboni2543]

Ruslan Otarov yes you do. Every hardwood I’ve installed, I remove the existing floor then screw the entire subfloor prior to new install

[@faridjahed]

Once I start your videos just can't stop watching

[@gabbierivera219]

Everytime I am starting a project in my home or in my families home, I'm so nervous! Because I look at one of your videos about what I'm about to do, the way you explain things, your enthusiasm, gives me the motivation and confidence to go ahead and just do it. Currently working on replacing stair treads and landing with hardwood flooring. The staining combination to get the color just right was what has taken me the longest time, up to now. Thank you, thank you and again I thank you for all of your videos.

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@Network-Mike]

This is may new favorite DIY channel! Such great explanation of everything, a bit of humor and great camera work!

[@HomeRenoVisionDIY]

Thanks Mike, Max and I really appreciate that. Cheers !

[@douglasglass5243]

So ive done ALOT of the renovations that you can do to a house over the years, and while i understand ill never know everything or all the "best" ways to do it all, i can honestly say im pretty savvy...That being said, ive watched your videos for a year or two now and i really enjoy them, you are an excellent teacher, very thorough...Thanks bud

[@paulrobert3284]

When I don’t hit the staple in far enough, I snip the top off with cutting pliers and drive the rest down with a nail set. Excellent video btw.

[@smiffersmaffer]

Paul Robert the cutters are called dikes

[@gregorioromero7514]

My extension entire wood frame rotted stud plate How I go About resecure frame or replace

[@SharkButtholio]

i just take an angle grinder with a thin disk cause im lazy af hate hardwood floor tho they warp to much i use engineered wood nowadays cost more but last waay longer and looks exactly like hardwood and i noticed he didn't use any underlay under the hardwood i wonder why

[@samuelclements1262]

Yes a spring loaded nail set.

[@spankiedoodlesteve2086]

Sometimes it’s Quicker to pull back out with channel locks and re-nail

[@RedArrowRemodelingLLC]

I enjoyed you video and it was very informative to get a homeowner going. Dont care about the shoes, but please dont show homeowners how to cut like that on a saw. Pros get injured all the time with those. Occasional users should be warry and respect the power those saws have. I do bend the rules a bit with saws but undestand first thumb the damage they can do. IYKYK. Second is I didn't hear any comment about reading the manufacturers instructions or warranty documents. Every manuf. I have installed requires an underlayment to validate the residential waranty. Just something to think about. Keep up the content. Hoping to one day put out similar informative content.

[@toltecnightmare]

i used to cut flooring with the exact same saw just like that to save time. one day i was cutting a piece of cherry like that, and there was one little dense spot in the board that stopped the saw quick and smacked my fingers between the board and the cage so hard that when it broke my finger TIPS, it bent the cage. Take my advice and spend the time either using the right saw, or sitting in a hospital.

[@lenshandcraftedwoodsigns6033]

I am so glad I saw this. Those slip tongues are what I need. I am going to start at the top of the stairs to be straight, Then I need to go 32' one side and 10' the other. off that center mark I need to go both directions. This information will save me big time.

[@theothermarshal]

'Sir, what topping would you like on your pizza?' #19:50 'Hmmm, sawdust sounds delicious.' ;) Thanks again, Jeff, for sharing such excellent content!

[@chriscleave2173]

It was Littles Caesar’s. It likely improved it. 🤣

[@SomeOne-xr6wy]

I usually dislike most youtube flooring installation videos, however, you actually know what you are talking about. Good stuff man.

[@HomeRenoVisionDIY]

Thanks, glad to help!

[@robloxmaniacdanceandshake7871]

This channel is like a master class............ Flooring??... Now we are cooking baby!....Now only because he's a master Carpenter... Just a question.....Have been hearing allot of people moving to use OSB for flooring ideas.... By chance, in the future would he be willing to do a video on OSB flooring ideas??

[@HomeRenoVisionDIY]

I will look into that. Cheers!

[@lorenzoarreola5283]

Nice!

[@Maverick06723]

Yeah I’ve just done a project myself find myself coming along great new concrete new windows new floor new kitchen is looking great

[@michaelbergeron9862]

One of the best videos on hardwood floors that I've seen. You've prepared me for my next project! Thank you.

[@HomeRenoVisionDIY]

Glad it was helpful!

[@thomasfelder9885]

Great job.. thank you for showing us how to work through natural and normal errors... some similar videos are so perfectly done that you get stuck when you run into a real-world problem. Thanks

[@bearded_electrician]

Quick tip with the spline/double tongue/ slip tongue whatever you want to call it. glue it, throw in a couple brads to hold it in place, then run the stapler like you would with the normal tongue side. (Tip from one of those pros who dings the drywall 😉) On a side note, good thing I don't put any videos up of what happens on our jobsite. I think the KZbin safety trolls would have a aneurism with the "creative cutting techniques" we use. I love watching your videos, keep up the good work

[@HomeRenoVisionDIY]

Just something I will have to deal with until the jobsite finally kills me. Oh well. Who wants to live forever!

[@SportSoulLife]

Im a sailor, and I know that all too well. Cant ever really post any funny videos from the job to social media since everything that is fun/funny is prohibited by some safety law.

[@chriscoy1328]

Listen I'm a carpenter and I absolutely have the life hack for running floors without layout and thresholds at every doorway. It's so simple .

[@politicalpartyagnostic268]

I had not planned on putting hardwood flooring in my house but after seeing this video, I am going hardwood!!! 😁 Great Video!! Thank you!!!!!!

[@HomeRenoVisionDIY]

Price per sq ft it is the best investment you can make if you have the right environment for it! Cheers!

[@jackiemixon21]

Ive watched many of your videos, and I can't thank you enough for sharing your knowledge and being entertaining. You've help my personal growth in remodeling.

[@skg1217]

I’m a 28 year old with no home to renovate yet. But I still can’t stop watching your videos. Lol! Thank you for the great content!

[@rogerhodges9721]

Another good video. The only thing that I would add is to vacuum your floors before you begin installation. It is amazing how much dust and dirt that you will pick up. It will also help you find bumps, lumps and protruding nails that your prior inspections have missed. If you question the need to vacuum, watch the last few seconds of this video again.

[@ryantoms6061]

You do great work! There was a reason why I subscribed here when I was drunk. Best of luck!

[@HomeRenoVisionDIY]

LOL, that was awesome. Cheers!

[@matthewguthrie7675]

Great video! I have a house with all orginal wood floor build in 1919 and this will be so helpfully when I remodel it. I'm also working on a home I've owned for a few years and and having to fix a bad contractors work to sell it. Thanks for all your tips and keep more great videos coming. I love watching them.

[@HomeRenoVisionDIY]

Hi Matthew, in that age of a house I do recommend the kraft paper between subfloor and hardwood. In those old houses the basement usually has quite a different temp and humidity than the main floor space so managing humidity in you floor is very important.

[@scartcroatia]

Hi to HRV, I'm watching you from Croatia and I'm amazed with advises you're sharing with us. I'm building the house and you gave so much confidence to start DIYing by myself. I have technical skills but never tried the work by myself. You're the best!

[@HomeRenoVisionDIY]

Thank you for commenting. Cheers to Croatia!

[@srb2az141]

Haha svaki video koje gladam da nesta oko kuce uradim nadem neko nas isto gleda. Stvarno nas narod naj vise raid.

[@napolitanotile2919]

Ok,You rock it!! You are gifted brother 🙏! THANK YOU FOR YOUR INSIGHT

[@pattangelini1062]

Amazing tips. Went through some serious headaches on my first flooring job. Thankfully I got through it and a lot of these tips are helpful! Thank you!

[@donaldtoohey2380]

After watching several videos on this topic, I feel more confident with the installation ahead of our floor. Excellent tutorial, tips, tricks and techniques! Thank you.

[@HomeRenoVisionDIY]

Cheers Donald, glad to be of some help!

[@skiprope536]

Hey buddy. Great video. Transitions are a pain in the butt. Especially when there is an elevations difference. Example tile to wood after renovation. Tile required 3/4 additional plywood then thinset/hardibacker/then tile. Now you are 3/4 higher than finished floor. I love renovations. Great video.

[@alexberry4758]

Poor tips and tricks. Never square off hardwood from an existing room. That’s relying on the room your adjoining to was installed square to the room or hallway your installing. Every professional will measure and find center of hallway or room and snap a center line then measure off center to first row to ensure that the room your installing is square to the room itself. If you follow this abhorrent information he is peddling for views your hardwood will end up looking like a diagonal herringbone pattern when you reach the end. Also he left no expansion gaps, didn’t undercut and jambs and slip floor under, used PL Premium glue which expands and humps up and will create a buckle in the floor. No spacing on ends which will result in baseboard being pushed and pulled off wall by expansion and contraction. Litterally everything he suggested is negligent and completely wrong. Even a DIY channel would be better to follow, this is like watching an accountant go through Reddit and think he is a master carpenter from reading posts. As a fine home builder I was cringing so hard watching him give completely incompetent info. There are so many creators on KZbin that give great accurate info, please don’t give this leech views.

[@skiprope536]

@@alexberry4758 oh give it a rest. Speaking as a master carpenter there is nothing square unless I did the rough framing. Wing. A pro can make it all look square. A hack will make a square room look like hell. Which one are you.

[@alexberry4758]

@@skiprope536 but.. that’s my whole point. Nothing is square. And to square off flooring relative to another room is negligent. We always find center of the room we are installing. As a professional you can recognize this. Nobody uses a framing square on an adjacent rooms cased opening to determine the placement for a floor.

[@skiprope536]

@@alexberry4758 yes and no. Sometimes you gotta cheat it the sides maybe 75 degrees or more and the other side may float as well. Bottom line that is why I Dona flat threshold with wood I am using and cut the angle to meet the tongue then I under cut the angle to mate with the tounge. You can never tell what is off.

[@perrysleeman8203]

Great, covered a lot of territory in a realistic, easy to absorb fashion and obviously have the experience to back it up. Great job.

[@HomeRenoVisionDIY]

Cheers Perry!

[@charlesangeloirace587]

Love that belly support tilt maneuver to get a square cut on the chop saw. I learn something new every time I watch your show. Great stuff.

[@ryanpich400]

I have to say, great video! I've had a night of reading your replies and the comments of others. Lots of ignorance out there. I'm with ya! Some people are just so silly. Subscribed!

[@jakekraybill1723]

I like how the register perfectly matches the color of the pre finished flooring! So spot on

[@HomeRenoVisionDIY]

Thanks Jake, it is a nice look worth adding to the project.

[@frontierfabricators6703]

I like the way you do things... reminds me of myself doing contract work. I just purchased a "fixer upper" house in need of complete renovation (circa 1960's), and thought I'd see how others are doing things. Great job, thank you!

[@ahmadhussainwebshare1001]

Great job Jeff . I am software engineer was looking for someone to fix my floor. After watching your vedio i think i can do it by own . Thx lot bro great vedio.

[@daveshangar6820]

Thank you for this video Jeff. You make it all look so easy. I just bought my first home and the carpet in the front room definitely has to go so I was looking over some videos on choosing carpet and I ran across your video on hardwood floors and I might just decide to give that a try.

[@dfavilla2]

The most useful video on hardwood installation on youtube. Excellent tips, great presentation. Thank you.

[@parrothead597]

Love the videos. I was wondering what the procedure or best practice would be when installing hardwood flooring across multiple rooms with out transitions. For example, where would you start? Supposed it was from the front entry back towards the kitchen and extending left and right from the front door to living/dining areas? Do you plan on starting across your longest continuous run, make that square and go from that point?? Thanks for the great videos and amazing tips.

[@howielee945]

Even though your VD here is 2 years old, always fun watching you doing home renovations.

[@TheSilverHatchet]

This is a ridiculously good video. It was very honest and answered all the questions I had about the hard parts. Much appreciated!

[@Shad0wC0mpany2]

Jeff enjoys a handful of wood chips on his pizza every now and then. 😋 As always, great work brother!

[@BillyGoatsAdventures]

Dig all your videos. I'm preparing for 2 bathrooms and tile, you videos were very informative to this 30 year electrician. For my solid hardwood floors on sub floor I have been using red rosin paper, is this ok? Should I use something else? I'm installing solid IPE Brazilian walnut with stainless cleats

[@fieryred12]

Also wondering if wax underpayment is needed?

[@thegonzalezs4953]

I really like the way you explain the process, is been like 9 some years when I came across with your videos , I had never lay a floor before and it was our first home , so I had to do it ourselves, and now we about to get an other house and we’re thinking hard wood flooring this time , so I had to watch your videos again . Thanks for sharing your knowledge with us . Following from West Virginia 👍🏼

[@Werdna12345]

20:00 I normally like some Parmesan on my pizza. I've never tried sawdust ;-)

[@TheBruunz]

It's only because you have never tried it before! Delicious

[@hijackn2890]

You're videos are so good. I'm on a big Home RenoVision kick right now. My fiancee and I are home shopping and it's so helpful to see what would be possible to do with a place after we buy it.

[@HomeRenoVisionDIY]

Everything is possible. You can do it, I can help!

[@uzcontractor]

Hi , I was wondering why you did not use paper underneath to prevent possible sound. We always install paper sheet between subfloor and wood flooring.

[@laurenharper1510]

Thank you so much for transition advice!! That is always my hardest !!

[@HomeRenoVisionDIY]

You got this!

[@janetstone236]

Thanks so much, however, I am confused why there is not a paper/foam/something barrier under the new wood?

[@ryneholman6851]

It's called a lawsuit...no vapor barrier=installer gets sued by insurance company...plain and simple

[@kimKim-ph8ps]

If its plywood, doesn't really require underlayment. As he explained in the video, that place, the subfloor is not moist. If its moist and concrete slab, definitely you need it

[@joshleavitt2722]

This guy is an experienced craftsman!!

[@playful1510]

In regards to the safety trolls question, I'd say that for a homeowner who isn't wearing heavy-ass safety boots every day for 10 hours a day, the risk of a knee replacement is low compared to stepping on a nail... But I mean, to each their own... Everyone is able to make their own risk assessments for what is and isn't overkill...

[@HomeRenoVisionDIY]

no big deal. just a little pain and a bandaid and off ya go.

[@josephcarroll7027]

to be honest...hardwood installers do not wear big ass boots..they mark the floors they get in the way and since your not working in a steel factory you really dont need them..but you DO need to be able to move..same reason roofers and siding guys dont wear them..just watch what your doing.

[@tchance65]

Your footwear should match the industry/job you’re performing. Good pair of comfortable shoes for this job is just right.

[@WestFirstBooks]

This video was exactly what I needed... slip tongues. WOW= game changer thank you.

[@HomeRenoVisionDIY]

So many tricks to share, so little time. Cheers!

[@ferulloscoasting6432]

A true tradesman. Eating while working and cutting right next to the lunch box lmao

[@1leggeddog]

I am getting my floors put in professionally tomorrow but that's so I can have it guaranteed. Still a great video that's giving me confidence when I do my other floors!

[@HomeRenoVisionDIY]

Such a Shame. I have never met a contractor who cares about the job as much as a homeowner. DIY makes you a huge return on the investment and you can guarantee you will be the pickiest one on the job!

[@ForeverRed2011]

Instead of running your board across the hallway would you recommend running the boards lengthwise down the hallway? And if you do lengthwise what would you do under the door frame to join the two rooms. Love your video , great help. Cheers

[@Sea-cucumber1151]

He didn’t run them length way due to color mismatch. They didn’t make the same color anymore. What I have seen is just putting an alternate color or use a T fit transition strip. He didn’t have to use that since they butted together. He said since they were different colors, at that angle of placement the color difference isn’t as noticeable.

[@sparklander]

Great video. I am planning on installing 350 sq ft of prefinished hardwood flooring next month in two of our bedrooms. We paid for installation of the hardwood in the rest of the home (1400 sq. ft) 5 years ago. Hoping to save some money this time around.

[@porkbellyism]

I watched your vid of flooring a bedroom and thought "I can do that maybe", this vid just made me overwhelmed again so I probably have to hire someone

[@efrenjaimez3564]

extremely helpful... I will install my hardwood floor in the next 2-3 weeks.

[@SSLaplaceTransform]

I just found your channel, lots of good stuff Jeff, thanks. Question - I'm about to install this type of floor over 3/4 plywood (ripping up the carpet, second floor). I've read mixed opinions on underlayment. I've used rosin paper in the past. I noticed in this video you didn't use any underlayment (perhaps because you used adhesive?) What is you opinion? Thank you.

[@russellholt5004]

Came here to ask the same question....

[@TopGearScooter]

This is better than property brothers :)

[@JuniperPaul]

Thanks. I'm curious why you don't recommend leaving an expansion gap between the flooring and the walls but instead knock everything in so tightly. If humidity and temperature cause the flooring to expand, won't it buckle?

[@anhonesthandprofessionalco6848]

Good question....

[@paulrnash]

Wood doesn’t expand very much long it’s length, and he left a 1/16th he said, which is probably fine for a 3ft wide section.

[@josevirola5082]

Thank you for the information and for the opportunity to meet with you

[@MontrealLather]

The heavy breathing 👌

[@Dantegnite]

Yes sir, please no kidding you may want to see a doctor. Great videos...

[@rickfraracci2619]

Great video Jeff. I have done almost every reno in many homes with the exception of installing hard wood floors. Your video was explained in great detail with all questions answered. Keep up the much appreciated communication. Rick. York Region Ont

[@duanemerritt6437]

I'm not trying to ridicule you bud. I always recommend a vapor barrier under your wood floors. Even if today everything is perfect. There's no telling what the future holds. I personally would never nail a floor in the same direction as the floor joists run. It promotes movement in the wood floors and I personally have seen sagging between the joists. Also undercut all casing. Always have a 1/4 to 1/2 inch expansion everywhere. As far as your cutting technique to each his own. I wouldn't do it because of the wear and tear on the blade. You do that with the right hardwood and you've burnt a expensive blade. Thank you for showing people it's okay to get off the couch and do something. Good job bud.

[@HomeRenoVisionDIY]

Cheers Duane, I get the opinion, just not a fan of a redundant paper moisture barrier. It does not make sense on a building science level. Just something guys have been doing since the early 1940's back when they were just starting to understand moisture and its effect on building. Up here in Canada we don't construct over a crawl space hardly ever so we have completely conditioned space under the floors where we are installing hardwood, so as you can see it is probably a regional issue more than a best practice issue. But yes if you have a crawl space it would make sense. It would make more sense to use a different flooring in those situations as well I would suppose! Cheers!

[@elmerlopez.9952]

@@HomeRenoVisionDIY Thanks for you information, im appreciate it.

[@anewstatic]

Home RenoVision DIY Moisture barrier is required by the NWFA so that explains a lot of comments asking about it. Can’t believe they don’t require it on main or sub levels in Canada.

[@bobby8719]

Not only for a moisture barrier but it helps with squeaks too!

[@nicholash8021]

@@bobby8719 In my experience it does not help with squeaks. That is a myth. The squeaks are coming from either nails going in and out or adjacent boards rubbing together at their edges. I have wood subfloor sheathing in place and I still get the squeaks from these two reasons I mentioned. Nails are better than they used to be so this doesn't happen as often, but you should always make sure the subfloor is flat and remember to screw down any squeaky or lifted areas before you begin. Squeaky subfloors equals squeaky finished floors.

[@alexmozmtl]

That tip on the "artificial lip" that you inserted into the "other side" of the plank... priceless (together with going both ways from the door opening)!!! Such a smart idea, wow! On the other hand, I'd use some no-slip rubber gloves when removing the old floors. It both helps you to force less (as anti-slip holds the wood better than finger) and also spares your hands from shards and nails. Just a tip :) Keep it up, love watching your videos all the way through!!

[@HomeRenoVisionDIY]

gloves are cool at times, however I do enjoy the odd injury. reminds me I am alive!

[@T.A.Persinger]

Love your commentary 🐸

[@HomeRenoVisionDIY]

Thanks Cheers!

[@stephengray1429]

thank you so much for your wisdom we will use it all

[@wfdrum]

Thanks for all of the videos you're a great teacher

[@jasonlevesque9303]

Wrong, 1st of all any professional floor guy know you run your wood long ways down a hallway, 2nd you never ever cut a board around a door jamb ,you under cut the door casings and jambs and slide the wood under it. And also no paper underlayment. That floors going to have tons of squeaks, always put pink paper or the white vapor barrier paper under hardwood flooring. And staples is a no!! They slip out of the sub floor, always use 2 inch cleat nails. I've been doing hardwood flooring for 20 years now. An in quite a few million dollar homes .

[@rasheed4585]

Bro you are expert. Thanks for showing us the way to install hardwood

[@ASR4703]

19:51 Saw dust and pizza is a great combination.

[@AtomTomic]

Just watched the hardwood flooring install and it works have been a nice touch if you would have showed us the job when you finished it. No reveal at all. All that work and no money shot.

[@KimberlyLPruitt]

Show us the finished product. 👍🏻

[@tanvigawde1612]

Very well done!! I so wish you could do my floors! I only trust that you’ll do the best job! I see how dedicated you are and doing such a thorough and perfect job like it’s for your own house!