DIY | HOW TO MAKE A BLUETOOTH STEREO COOLER

#bluetoothcooler #coolerstereo #coolerradio
More Videos On Amazon - www.amazon.com/shop/influence...
Materials Used :
Speakers - amzn.to/2NkMIuT
Amp - amzn.to/2Nn6Dtc
Battery - amzn.to/2Jq1zC7
Power Button - amzn.to/2NSrZQr
Connectors - amzn.to/3OLexfP
Surface Mount Connector - amzn.to/2NRW4iU
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
Today we added a bluetooth stereo to a Ozark Trail Cooler. This cooler is very similar to the Yeti & Rtic Coolers. The cooler is all stock on the inside and can still be used as a cooler. This is how to make a stereo cooler! #bluetoothcooler #stereocooler #icechestradio

[@alvaradocarlos22]

Im been meaning to try something like this for the longest. Your video has great details and infor on how to run everything with out cutting the whole thing open.

[@richellenicholls6912]

I sold a cooler at work a week ago, that I nearly fell over when I realized the price of it! It was about $197.00! I did a double take. I told the guy for that price it should have speakers in it like you were planning to do to this one! I saw your video where you tested the length of actual cooling in it. And then how you installed the drain plug. Neat to see it full circle now!

[@BareMetalFabrication]

This is awesome. I don't know how you fit all of that in the lid but now I want to try lol.

[@KayakDIY]

Dig the video bud. Just bought this cooler for using on my paddleboards. Love your DIY. I subscribed!

[@Fentertainment]

Very Cool Man, I do appreciate it! I will be sure to check out your channel!

[@itscoolpapapump3812]

Another project for me to do😆👍🏻 great job!

[@johnyzx10r]

Great amazing video . How tall was that hatch once you took out the foam material .? The fusion has low clearance so is good but I need to know from the cut you made to the bottom of hatch ? Thank you

[@bang509509]

Great job!!

[@Backporch_bbq]

Great video. That would be great for a beach trip or a day at the lake. 👍😀👍

[@Fentertainment]

You got that right!

[@danaolivarez8995]

@@Fentertainment I cannot find the connectors. Is there an alternative

[@mauro928]

Wowww that’s the best I’ve seen so far

[@dssking]

Excellent work!!! What's the depth of the lid? Is it possible with these coolers (Ozark) to install everything in the front of the cooler? I'm thinking of doing with with the Kicker PX series amp with BT built in. Suggestions??

[@ricco0402]

Good job and thanks for sharing 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

[@scottgeoghegan1808]

Best one on KZbin 👍

[@cbauman222]

Check out mine kzbin.info/www/bejne/hWbbYmOJrc9maKM

[@Jewelrymaker]

Nice build!

[@cbauman222]

Check out my build kzbin.info/www/bejne/hWbbYmOJrc9maKM

[@MrSpanky473]

Nice build. I did one a few years back in a igloo cube. They didn't have bluetooth built into the amplifiers back then.

[@Fentertainment]

I agree. I used to sell plans on making bluetooth coolers in colemans on ebay back in 2013. I had to add much more stuff to make it also. This was pretty much a breeze. When I started the channel I had a yeti with a stereo in it but wasnt bluetooth. This isnt a diy but its an oldie. kzbin.info/www/bejne/fYjIlqtvrZ6grKc

[@carloscervantes4053]

Would you be willing to build and sell one?

[@tayloredwards6927]

Would u build one to sell me ?

[@kylewilliams3306]

@@Fentertainment how can I connect Maxmoral 3PCS DC-099 DC Power Socket Connector with Waterproof Cover Cap,Threaded Female Panel Mounting Adapter Power Jack 5.5 x 2.1mm to 6000mAh battery and also how to hook this APIELE 22mm Latching Push Button Switch 12V Angel Eye Ring Light LED... up to plye hydra 4ch amp ?

[@kylewilliams3306]

⁠​⁠@@Fentertainment hi there I was woundering if you could get a better view of all the components the way you hook up before you put it in the battery the amp inside the ice chest cooler lid I am trying to make one but I am not putting the batery and the amp in the cooler lid I want to put the battery and the amp underneath ice chest cooler lid thanks I would per a better view of all the components hooked before you put in the lid love the video

[@allkindsofoutdooractivities]

Great mod! Awesome

[@spawny6191]

Great video

[@seansieja6001]

I have used a pyle amp in other builds. I put it in a enclosed case and it overheated pretty fast and burnt up. Since then, I have added a little 3 inch PC fan in the wall of the cooler to vent the hot air. How do you prevent this one from overheating? Has anyone enclosed this style amp and had it not overheat?

[@CarlosRodriguez-wh4qd]

so where and how you got the amp n battery in the lid? thanks

[@justingreenfeld]

Great tutorial

[@Fentertainment]

Glad you think so!

[@josh1m6]

How did you fit everything through the speaker cut outs?

[@5454commander]

How were you able to power the amp with the battery ? I have everything the same but how did you splice the wires from the amp to the battery ?

[@TheMiketuck12]

I am building one of these soon, but I’m doing it a bit different with 2 audio boss 6x9s. Would you still recommend this battery?

[@evan2290]

Really like the build man, want to duplicate. Need help with one thing. I know the connector you listed connects the positive and negative from the amp to the male Y from the battery, but how does the blue from the switch connect to that same Y from the battery. since the other one is for charging. I know it connects from your diagram...but it is never shown and I can't figure out how...please help! thank you.

[@caseymoto]

Do you think it sounds better with speakers facing upwards , I made some with speakers mounted vertically so the they can face me.. But wondering how the upward facing sounds, I wanna make another one

[@AllenS-of4nx]

I ordered all the parts that you linked. I’m having trouble with the battery shorting out when I plug in the external charger. Any ideas what would be causing that? I followed the wiring diagram

[@sfsaltwateradventures]

Wow it came out awesome! Btw what's the name of the song you were playing in this video? Thanks!

[@Jeremygarza89]

Is there a way to wire the button into the battery switch so the battery isn’t always on

[@14truelies]

Could you please show how exactly you got the battery to power the amp please? I’m very visual and trying to figure out how to connect power and ground to that Y off the battery. I’m assuming you have to cut the piece of the Y or could you wire in something that plugs into the Y connector?

[@jamesscrivner1645]

How did you mount the amp and battery?

[@ntilly]

Go Gamecocks! Thanks for sharing man!

[@devantecrear6522]

How is the battery pack wired up? Can you do a video of the inside setup

[@user-nf8iz2tp2w]

can you move the cooler way so we can see the way the battery is hook up to the switch and amp thanks. i want to make a bluetooth ice cooler with plye 4ch hydra bluetooth amp and plye 6.5 1/2 400watt marine speaker

[@stramel89]

What's the battery life on this thing? I'm afraid it wouldn't last 8hrs blasting music.

[@Marcosg231]

how long does that battery hold? how many hours of play time?

[@chino7930]

Your connectors link doesn't show up when I click on it, which external connectors do u use

[@Fentertainment]

Materials Used : Speakers - amzn.to/2NkMIuT Amp - amzn.to/2Nn6Dtc Battery - amzn.to/2Jq1zC7 Power Button - amzn.to/2NSrZQr Connectors - amzn.to/3OLexfP Surface Mount Connector - amzn.to/2NRW4iU

[@mikeyjoe0921]

Fentertainment will the will amp or battery overheat in the sun? Plan on building one for a river trip. Great job, best build I have seen.

[@jacobrogers2483]

What are the connectors when I click on the link it just pulls up Amazon

[@danaolivarez8995]

Anyone find connectors or alternative

[@kevinlowe87ify]

That stuff would work pretty nice on my kayak.

[@Fentertainment]

Sure it would jam!

[@chancebowring5330]

Any issues with amp overheating.

[@cuuduong3380]

Do you have problem with amp overheating

[@KR3WZ1]

In your description, what do you mean by connectors ? Can you comment another link because that one isn’t working anymore. Thanks !!

[@joshstewart7849]

What were the yellow wires for?

[@charliemcfunyin9121]

How did he fit the battery and amp in the lid

[@chayiyo123]

How much play time do you get with a full charge?

[@martinsalas4995]

I seen your video and its cool I'm ordering the parts to do it myself. The only thing I'm lost is the picture of the wiring. Can you show me how ? Or is there a better way so see how to Connect the wires? Tia

[@zekerodcom]

Howard hours do you get on that power pack.?

[@kiekelly9055]

how did you wire it I’m lost

[@jimholvey3568]

How long would that battery last because it is quite small?

[@peglegpirate2333]

How long did you get playing music on a single charge?

[@bobbylaird4801]

I played music on my exact same set up for 12 hours… 6 hours of that was continuous

[@AC-mb9ni]

🔥🔥🔥👍

[@chancebowring5330]

Thinking on building one myself. Curious if it’s possible to use 2 of those battery packs for longer battery life.

[@Fentertainment]

Probably so If you go with a bigger cooler.

[@Pursnikity_20022]

Not quite sure if I’m ready to drill into my 360$ yeti 😁

[@j.renteria3969]

Will you battery pack still charge even though you left it on “On” the whole time?

[@GenglishPLC]

I watched all the way up until 0:01 when I saw your hat... then I went to the next stereo cooler build. Seriously though, nice job. It would sound even better with Tiger Rag playing!

[@Fentertainment]

LOL I hear you. Appreciate it. Wish we were having a better season. Clemson is strong again this year.

[@user-nf8iz2tp2w]

how did you pull out the yellow wire and also can you show a better way of how to hook the Talentcell Rechargeable 12V 6000mAh/5V 12000mAh DC Output Lithium ion Battery Pack for LED Strip and CCTV Camera, Portable Li-ion Power Bank with Charger, Black and also hooked up to the amp thanks

[@kylewilliams3306]

How can I hook up the toggle switch to the plye 4ch Bluetooth amp and the charge port to the the 6000mAh 12v rechargable battery that 40 on amazon pleas let me know thanks

[@brianhale563]

How long does the charge last on average?

[@changemyname8693]

The link for connector is dead. Does any have a link or point me into the right direction? Thanks

[@jacobhubbard1714]

How long does anyone think the battery he used will run those speakers?

[@blaketyler670]

Where can I get all this to make one?

[@ricardostreete199]

How long that battery last with that setup

[@0801161215]

Great diy. At the beginning of the video when it was full of ice and drinks there was a light is that something you installed???

[@fomocowboy]

I believe so, I have the same cooler and it doesn't have any lights or wires in it.

[@MrKikis007]

They are led lights that they sell at amazon www.amazon.com/dp/B074T273SG/ref=cm_sw_r_cp_apa_i_bxMgFbGN1WAHX

[@elsuperpollo2273]

I would like to make one of these with two radios one am/fm with vhf marine radio for a kayak and to run some lights

[@Sancho2852]

I want to try this but I don’t really know if I can do it 😂 and I don’t really know how you wired everything in the lid

[@noegarza67]

How is the bass on it?

[@hurrikanegolf5274]

question i ordered one of the docks for a cordless 20v battery do i have to run a voltege stepdown on this amp or would it be fine direct wire to the cordless battery

[@westerntke]

Is there anyway you can explain the wiring better. I’m having trouble figuring out the diagram you showed.

[@allenwilson9656]

That's cooler than hell 😛

[@Fentertainment]

I see what you did there!

[@leroyrecio6397]

How is it Bluetooth. I did the exact thing you did but I can’t find it on my Bluetooth list.

[@stedepalahang7798]

With your set up, does the stereo still play while plugged in? Or does it have to be run on battery only?

[@Fentertainment]

either.

[@SavageDad_2]

I’m getting a static sound when I plug my speaker wires to the back of the speakers. Did you experience that?

[@GonzoD505]

Would’ve like to seen how you installed the battery and amplifier in the lid as well. Unfortunately you didn’t have footage of that. Great DIY nonetheless. Perhaps you can reply with the steps in how you did install the amplifier and battery though please.

[@gonzalosolis6923]

How do you connect it with Bluetooth

[@ferrarionemr]

How long does battery last.

[@acdiaz]

I click on the link for connectors but it doesn’t go to it. Can you send me actual link thanks in advance

[@a1cc236]

Link ?

[@supahmayne6103]

What do you use to get the Bluetooth signal? is it the amplifier?

[@priscillavaladez5612]

its the amplifier

[@dominickarango1010]

Do you sell them becuase I wanna buy one

[@scottmcleod2884]

Have you done a battery test? How long does that battery last?

[@Timb0515]

I need to see how you connected the wires from the amp to the portable battery those connection don’t line up.

[@Fentertainment]

I made a wiring diagram and inserted it in the video. Once you get to that part just pause it. Nothing plugs in to each other really.

[@chelseyhughes3312]

is it water resistant?

[@jtsatterwhite694]

Is the stereo equipment waterproof?

[@rebornmotorsports1513]

Im a bit confused in wiring. In the video u said the battery button always stays on. Does the switch turn the battery on and off also if the battery switch stays in the on position? Or does the push button switch only turn on the amp? I guess im wondering that becasue if the battery always stays on does it basically just die on its own when not in use?

[@AntiTruth]

It will technically use a very small amount of battery since when you have the battery on it lights up tiny lights that tell how full the battery is. The amount used would not even register though so i wouldnt worry about that. It has to remain switched on due to the build of the battery that requires it to be in that switch position to take a charge.

[@medinaaler7]

You don't happen to sell these?

[@muddychevy8807]

Hey I was going through your links in the description the connectors would not come up on Amazon what is a alternative that will work in going to do this to the same cooler

[@Fentertainment]

I will update the link now but these should do the trick. amzn.to/3OLexfP

[@marcusrocha2012]

Hey man. Umm what little led light did you install inside the cooler when you opened it?

[@Fentertainment]

kzbin.info/www/bejne/hYS5hJZqi6-LmLs

[@BigGuyCustoms]

What's the name of that song?

[@zacharyhudgens2464]

Is this louder than a 4 wheeler engine?

[@NirvanaWoodWorksbyJanie]

This is amazing!!!! Would a power bank be the same thing or similar to this rechargeable lithium battery? Would it be enough? It's a power bank for laptops, phones and so forth. Thanks in advance for your time :)

[@Fentertainment]

I think so, just wanna make sure what ever you get will fit your cooler and the opening of one of the speakers.

[@hardhits881]

Are you selling these completed ?

[@NVMYTA]

@fentertainment your video doesn't show how much installation you carved out or the insertion of the amp & battery.

[@Fentertainment]

I didnt show it but it was a good bit. Basically I removed some and then test fitted until I removed enough. If you get this same cooler there is a plug underneath the lid where the manufacture filled the lids with foam.

[@abrahammares]

Hey man do you have an alternative speaker, it shows that this speaker is unavailable?

[@MrAlvarez919]

Polk audio marine shallow mount. Double check the depth

[@jasonmontet653]

Did you have to secure them or just pushed them in snug?

[@victorbustillos8746]

Have you ever had any heat issues with the amp?

[@seansieja6001]

I have on other builds I did. I'd be hard pressed to imagine that the amp doesn't overheat.

[@shawnpaul7226]

Do you have to use the volume control on it? Or can it just be controlled via Bluetooth?

[@rebornmotorsports1513]

How big of holes did u drill? Did u just eye ball it?

[@1madrs637]

Showed him tracing the speaker ring

[@rebornmotorsports1513]

There is a link in the description that says connectors but they're not available on Amazon anymore what are those exactly?

[@AntiTruth]

There are 3 different ones you need overall, the male and female 12v 5amp connectors, these are 2 different connectors sold as one pack though. The the ones linked arent available, however there are other brands available. And then you need the 2.1MM 5A DC power jack socket. The one linked for that shows still available.

[@CK956]

Can you add a link for the connectors in the other brand

[@michaelknight6608]

Where did you put the battery and amp? How long does the battery last?

[@danaolivarez8995]

The adapters aren’t available now what would I use instead

[@djmrtdfw]

Im interested in this info as well....

[@priscillavaladez5612]

what other speakers do you recommend? the fusion speakers aren't available on amazon anymore

[@AntiTruth]

You need to get speakers with a < 2inch depth so they fit in the lid. I got a pair of magnadyne speakers that worked great. Im doing another cooler now and using a pair of pyle marine speakers with blue led's inside that will hopefully look very nice. Most marine/hot speakers will work great as long as you keep the depth correct so everything fits well inside the lid.

[@priscillavaladez5612]

@@AntiTruth perfect thanks!

[@jakemyers5703]

Can you send a workable link for the connectors?

[@peanut032208]

Did you find them?

[@juantienda1301]

The connector link doesn’t work..