DIY | How to make a Silicone Mold/Mold Putty using SOAP - EASY

[@cynthiaknox9948]

I really love this kind of tutorial - no wasting time, no unnecessary chatter, clear and simple. Thank you for sharing.

[@alexbowman3719]

Does it matter what kind of soap and how much you use? And does the temperature of the water matter?

[@cm1point5]

yes it must be 100 degrees

[@NicksLegoBin]

Why the lemon? Lemons are kool and all (I got no prejudices) but like...why?

[@bwibwi5]

Did you mean... Prejuicedices?

[@NicksLegoBin]

Cindy Le yaaasssss

[@gaiamarchand9581]

*****

[@gaiamarchand9581]

*****

[@hayden1280]

To show how much detail it can hold

[@thenumberonecrafter]

Awesome!!! Never buying taht expensive mold putty ever again! :) Thankyou!

[@the_diamond_girl8956]

It really works !! I just did it just make sure ur silicon is 100% silicone coz otherwise it will just be goopy and grows . But yea it's really smart! And make syre u keep dipping ur hands in the soap and water coz it will stick I recommend every 30 seconds dip ur hand in soap and water.

[@AnilKumar-ti3er]

l

[@lydia8472]

You.Just.Saved.My.Life!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you sooooo much!!! Amazing mold putty or silly putty are pretty expensive online,but this is just perfect!!!!!!!

[@thebabyhandprintcodeb2506]

Are either of those non toxic since silly putty is played with by kids curious?

[@laurapalmer3403]

I love this way of making molds, but need a bit more information before i try it... How many ounces of water and soap did you use? Also, did you use tap water and a specific brand of soap? Thanks !

[@olgateway]

It is not a precise science. The water volume doesn't matter as it is not absorbed, the soap amount doesn't matter, it is there for the chemical reaction and to make things lubricated. Have fun!

[@cheeseinc2545]

olgateway One little thing to note is that silicone caulk makes acetic acid vapors after curing, so either work outside, in a ventilated area, or just brace yourself. It isn’t toxic, but it makes your nose sting.

[@katiemedford564]

Rev Bear why not dawn? Will it not work?

[@bubblyandchic]

Thank you, it looks so easy, I will try. What kind of soap did you use?

[@BumBumSurpriseToys]

Wooww!!!! :) Hi everyone!!!! Have a lovely day!!!

[@StrawberrysheepBlogspotcake]

Ooh, this is so helpful because the other silicone tutorials with the cornstarch never work for me. Then I got frustrated at the time and decided to just buy the putty. But I think I might still make this. It seems fun. Thank you! The lemon would look really cool if you painted it to look like a lemon after it was baked. I love how you used that for the mold!

[@zalakshah65]

Is there any other way of making the same thing , I mean without using silicon?

[@zalakshah65]

Okay , bcz I live in Mumbai , India and I hardly think silicon is available , so I asked you which there is any other way to make the cover of same type or something :D

[@cathybenzel6637]

+Zalak Shah Try searching in a hardware store or online shopping websites like Amazon, Flipkart, idk whether you'll get them but it is worth a try's! Good luck on finding one!

[@zalakshah65]

+Cathy Benzel Heyy , thanks for the help , I got it :)

[@gguk_7277]

Yes you can use hot glue or clay

[@visheshvs9027]

+Zalak Shah bro when did u get it even I need kt

[@scathecraftster4855]

That was so creative and resourceful of you! Good job! Now I don't have to spend a lot of money for making flexible molds! Thank you so much!💜💜💜💜

[@UzumakiNaruto-ln9kg]

This is so much better than the silicone mold with corn flour version. Thank you. :)

[@bonbon_aska]

i came from there also.. lol

[@chrystinawatson428]

Thank you! This way is easy and a money saver! No more buying cabochons!

[@LeleSweets]

Amazing! This is super handy, thank you!

[@kamidodson-perry8002]

Thank you for sharing. I have only seen the silicone + cornstarch method thus far. I think resin would work in these molds as well as clay.

[@littlemissmakeup075]

+Kami Dodson-Perry yep it dose

[@lvrrem]

Where do you store the mold putty after using it?

[@Musicgurlz17]

IN a ziplock bag

[@lvrrem]

Thank you very much!😊

[@Cmvle]

if u use a ziplock it with stick to it so use a playdoh container or a tight tube container

[@maggiem4734]

Thank you, thank you, thank you for such an easy, uncomplicated, and fairly neat project. THIS is the putty I will be making! Bless you 🙏🏼❤️👍🏼

[@suteeracrafthandmade178]

Can we use this mold to make resin?

[@cryptoriana9981]

thank you this looks very cool and easy to make! can i use it as a resin mold???

[@hannahkaticilla4592]

will this work with clear silicone? I bought some to go with a different recipe I found on youtube, but I think I'll try this one.

[@dogarethebest101hello6]

Try it

[@KKatee777]

@@dogarethebest101hello6 im pretty sure she has already

[@notanotaki8095]

Very nice, can you use this mold for cold process soap making?

[@anikahlyou1407]

So your making silicone with silicone

[@fluffycroissant]

Lol

[@chaylanicolee891]

+Anikah Lyou NO your making silicone molds with silicone. if your going to talk smack then leave

[@anjoliemarie]

Well it is called a SILICONE mold

[@thedtachannel6390]

+HowTos4U don't got to be rood

[@anikahlyou1407]

+THE DTA CHANNEL I'm not trying to be rood or rude

[@adrienk7186]

This is so handy and it really does captures detail really well!

[@3189maria]

muchas gracias por el fantástico video. Es el 1er video que encuentro para hacer moldes de silicona barato y sencillo. En este momento me siento muy FELIZZZZZZZZZZ. gracias desde España

[@SoundBlastMC]

how long does it harden?

[@Amber-zy2wv]

its got my hands all sticky lol i used alot of dawn dishsoap how do i get it off my hands i been washing them. can i keep it in a ball and not use it til later? im not sure how how? wont it dry up b4 i use it to make my molds? awesome vid btw & ty 4sharing!

[@fluffypandaproductions6605]

This guy sure loves silicone 😂😂

[@justyna4375]

xD

[@nessie505]

LMAO 😂😂

[@domingocruz475]

lol :3

[@duyenky9694]

Sprinkles & Glitter .

[@sneakyscamp3767]

FluffyPandaProductions why

[@thomasalanwoolley]

This is so super cool, I can't wait to give it a try! Can you please tell me though how long you have to knead the silicone or at what point do you know it is ready to have an object pushed into it to make the mold? Wondering bc I don't want my mold to be "underdone" or sticky and never set firmly enough and not work out. Thanks so much!!

[@OhhMyCasey]

This is so awesome! I'll have to give this a try :D Thanks for sharing this DIY with us!! ^-^

[@shazla_ziya]

I love it how you show us everything in detail ! Xoxo !

[@Victoria-ft1yl]

this didn't work! I tried it and it failed. the silicone was to liquidy!

[@carolynkuo743]

Was it 100% silicone?

[@Jesterclown17]

You can always try the cornstarch method.

[@MEPR03]

Use the clear is better

[@debraeller1653]

this is the best clay that i ever seen on here

[@kekekat212]

how long does it take the silicone to turn into the actual silicone instead of the clay?

[@Ivan-zp5me]

like one day

[@pscrafts192]

over night

[@CorenaGaroutte]

Depends on how thick and size of mold.

[@khamaniponder4328]

a few minutes

[@annho208]

Yes! Finally slime that I have all the stuff I need

[@silviasantoro302]

Ciao, io ho provato a fare la pasta di silicone per creare la cover dei minions ma L ho fatta 4 volte con pessimi risultati, tutte le volte non è mai diventata uniforme e come provavo a stenderla si sbriciolava, ho utilizzato un silicone 100% bianco professionale... Posso utilizzare questo metodo? Considera che io vorrei fare tutto il procedimento lasciando una cover da sotto, grazie ☺️

[@silviasantoro302]

+FimoKawaiiEmotions e tu cosa mi consigli?

[@silviasantoro302]

+FimoKawaiiEmotions comunque ho usato il "sil-universale" della Bostik bianco verniciabile

[@radicefoglietta841]

+Silvia Santoro io ho provato con l'acrilico... ehm.. un casino ! ahahaha non si modella nemmeno.

[@giulianafornario4462]

+FimoKawaiiEmotions scusa se mi intrometto, dove posso comprare il silicone che usi tu? prezzo?

[@mariasolecorelli5049]

+FimoKawaiiEmotions posso usare questo metodo ( usando solo il silicone ) per fare le cover? Comunque hai un canale semplicemente fantastico😙

[@akanbiolatunde121]

Very good job, after the water what is the name of that liquid greet you add with water.

[@tarnsjohnson6924]

i watched this and then made some molds of my own....fantastic...thank you for sharing

[@scottsound4711]

How long did it take to go off/set? Thanks.

[@wubblybubbly5558]

Great Idea! Will this withstand the temperature of molten wax?

[@nene6257]

Per quanto tempo lo devo far asciugare?😊

[@nene6257]

***** grazie😊 ma se uso questo metodo per fare la cover quindi senza maizena viene comunque?

[@nene6257]

***** ah ok grazie mille 😍

[@nene6257]

***** ma il sapone quale bisogna usare? Qualsiasi o detersivo per i piatti?

[@nene6257]

+FimoKawaiiEmotions ho fatto un casino con la cover 😭 ho aggiunto l acrilico per colorarla ed è diventata tutta grumolosa

[@nene6257]

nono lo era ma magari è scaduto boh :( non lo sooooo

[@elizablanco4382]

This is so cool!!!!! Can I use clear silicon?

[@elizablanco4382]

Thank u!!!!!!

[@xXStolenSmilesXx]

just tried this. it isnt working. it keeps sticking. nothing like yours. what do i do? i put it in soap water as you did

[@xXStolenSmilesXx]

i tried. didnt work for too long. in the end i used cornflour which worked well. just rolled it in

[@jenniferk4615]

Make sure to lather your hands in soap before trying to pick it up

[@Nate_Lloyd]

sunny s. He used the wrong soap in this video! I have no idea how he made it work, but you’re really supposed to use the blue dawn dish soap! You have to use it with 100%silicone type 1! In all the entire project will cost about $6 to $8!

[@fredwoods2929]

Try mixing silicone with corn flour ...much better ..

[@jacqueslariviere2698]

MEILLEUR TUTO A DATE, (BEST TUTO SO FAR ) MERCI

[@guineagamer678]

what kind of soap did you use??

[@MisaAkaria]

it doesn't matter as long as it's Liquid soap

[@cekfgkekfkef7259]

Mrs_ SoDelirious so you can use fairy liquid in the UK?

[@jenniferelenbesunu8910]

please am I base in Nigeria so I don't know how to get the items used in producing the mold.

[@giovannipiccirilli5001]

Per fare gli stampi é meglio questo impasto o quello di silicone e maizena? Comunque bellissimo video e fantastica idea! Un po' di tempo fa ho provato a farlo ed era venuto benissimo!

[@sweetnessoverloaddd]

what a great idea!

[@yin9121]

Can i use Resin like Eastcast Resin in this mold? and what kind of soap can i use, like dish washing or shampoo or shower soap ?

[@BlackCat_2]

I have tried it and it was super fun but messy. :P I used a clear silicone so I could see through the mold because that is what I needed for the project I had in mind. It worked out really well. :) - Heidi

[@user-gw1bk1dw3z]

So you can use that seethrough silicone that smells like vinegar??

[@BlackCat_2]

Maki Garza The one I used didn't smell like vinegar to me but it didn't really smell great either. It has been about a year since I made it and it doesn't smell like anything now. I just went to the hardware department of a local store and looked for clear silicone.

[@user-gw1bk1dw3z]

was it like a teal color and said 1000?

[@BlackCat_2]

Maki Garza It was so long ago I am not entirely sure but reasonably sure this was it from my local walmart superstore: www.walmart.com/ip/GE-Clear-Waterproof-Silicone-I-Caulk/19902076

[@user-gw1bk1dw3z]

thanks :)

[@dieter893]

Hi, nice video and good result as cheap way to make molds. Will those milds also work when using for resin craft> Thanks a lot and best regards from Brazil. Dieter

[@fieldwork763]

Will resin be okay in silicone molds?

[@krazykrissy4350]

Kristin Nguyen yes

[@samanthageorge2533]

I have been looking to find a way to make this without corn starch for so long, thanks for the great idea x

[@morganseiler2832]

Is this safe to touch with bare hands? O.o

[@nielsen_]

Yup, it is, i've tried it several times an nothing bad happens. Usually this products are made safe because it would give them problems if someone got hurt. :)

[@morganseiler2832]

One more question! :) I tried this but the caulk was so sticky it was an umanagable wad, even after the soap water. How did you get yours to behave?

[@nielsen_]

i just followed the steps and it worked for me, the reason it doesn't work for you may be the proportion of soap or the type of silicone. The consistency of mine was really loose and soft but definitely manageable so i don't really know 😞. Anyways, have you covered your hands in soap before manipulating the silicone?

[@debracontreras422]

+Morgan Seiler try some dish soap if that doesn't work try pouring the soap in really slow and also mix slow:TIP😉💁💖

[@lavaavara264]

maybe just to be safe use gloves

[@inisdoida]

This was a very good tutorial 💜 but i'm having trouble to understand what kind of silicon is. Is industrial to put at steir? Or just that we put on the wall kitchen?

[@dabombdigitty23]

now I can finally make a homemade flesh light

[@mosasako4679]

dabombdigitty23 haha i thought the same

[@bassplayersweet6951]

dabombdigitty23 me to

[@Alexandlir]

Lol I was just here for that

[@francismorganstern6455]

Now I can replace my pocket pussy from 1978 I bought in NYC it's up for sale slightly worn price negotiable

[@lucistudios5699]

Francis Morgenstern XD Omfg

[@Themicrobakery]

This is genius! Can you bake it in the oven if you're using polymer clay?

[@frankhughes76]

please don't use this type of silicone for food applications you run the risk of poisoning yourself or someone else. there is food grade silicone available

[@frankhughes76]

***** I'm not sure what you're asking. I have been known to be random but certainly not the king of anything.

[@bbbeats72]

It's a channel on youtube LOL

[@SirFrancisBaggyPants]

Frank Hughes hahahah thats hilarious nah man its a youtube channel where he make a lot of cool stuff but he tends to make a lot of silicon things.

[@veronica918]

Bella idea !!! ma quanto tempo si deve aspettare per fare asciugare gli stampi?

[@misscucco4013]

Mine just stayed soggy and gross >.>

[@Lexibug444]

MissCucco sAme

[@marinskiify]

Thank you for the tutorial! May i use it for food mold?

[@Aangel452]

NO YOU WILL POISON YOURSELF. ONLY USE FOOD GRADE SILICON.

[@lirinlynn_lynn2255]

Why I can't do this???

[@Temetzk]

Angel Tips Because you are lazy

[@andyussery8495]

......and stupid

[@guillermomarmol6107]

Me encanto ...lo haré hoy mismo ...había visto muchos tutoríales y ninguno me convencía ,pero al ver el tuyo me e quedado atónito ,muy limpio todo 👍🏼👍🏼👍🏼👍🏼

[@guadalupecarteno741]

You have saved my life, I'm so happy I could shit...

[@KaylaLouisVideos]

Guadalupe Carteno lmao

[@RVS214]

ahahaahahhahahahahahahahh LOL

[@honeybunny5325]

Fantastic video.Can I use hand wash gel?im in uk so we have different brands,(as I don't have dishwasher soap as I don't have dishwasher.)

[@natalieaerenlund123]

Yeah u Can doesnt turn out the same Way though

[@honeybunny5325]

What would you recommend fairy liquid eg

[@ikizagirl]

Q: DOESN'T IT SMELL??? i tried making this but the damn silicone thing smells awful made my nose hurt, the whole house smelled like vinegar the whole day. Or did i get the wrong type of silicone?

[@GreydeDeuil]

Thats just the way silicone smells, it will fade once its cured.

[@abbiegroves2921]

ikizagirl same but my silicone didn't stop smelling after it was cured

[@giacommetti72]

The silicone MUST be ACETIC acid cure, as the soap (glycerin) washes out the retardant in the silicone to make it cure faster. It will smell strongly of Vinegar , which is acetic acid in a dilute form. Other silicones are chemically based and will not work with this method of soap and water washing. Knead the silicone thoroughly with wet hands.

[@cadellinedevillina4570]

This is super fun and inexpensive. But, where can I buy the silicone like yours? I don't want that big so, is there a silicone in a small container?

[@popcorncentral6366]

Oh god, OH GOD!!! It smells like a toxic fuse even with soap!!!

[@oh5148]

yup this method sucks you can’t even cast resin

[@susivasquez7197]

Made a mold using the tutorial and its way more flexible than the cornstarch mold. Thanks for sharing with everyone😃.

[@shaikchandini9386]

Should it b freezed after making or left outside for sometime?

[@ethan8965]

"Easy" oh yeah let me pull out a fucking tube of silicone real quick brb

[@spacecadetdenny8530]

+Cant Hit Clips most people do have it actually, it can also be called calk, like whats in between your shower tiles

[@trashaccount5122]

lol. I have tons of Siliconetubes in my basement.

[@chaylanicolee891]

+Cant Hit Clips its cheap though

[@anikahlyou1407]

Ya

[@christindemarie]

+Cant Hit Clips you can literally get a tube of silicone at walmart for like $5 lmfao

[@auroravirginio6463]

Ciao! Fai delle creazioni bellissime! Una domanda: per questo progetto va bene anche il silicone trasparente o deve essere per forza bianco?💕

[@auroravirginio6463]

Grazie mille per aver risposto! Ti stimo tanto! Vorrei diventare brava come te!!💞

[@sizlax]

I'm super serious, lol. Can you use this method to make safe reusable sex toys? Also is there a way to add color to the silicone?

[@sizlax]

how?

[@supahx1421]

What the fuck is wrong with you

[@sizlax]

Umm, eww. Don't mention my mother and dildo in the same sentence... And no, I was actually thinking more along the lines of insertable toys(toys you insert into like fleshlight, not dildos).And no it has nothing to do with my mother, just the high cost of the ones I want.

[@sizlax]

Lol...

[@sizlax]

bird related items?

[@AlWolf]

so it's kind of a cast more than a mold right? still a very cool idea

[@ethansutton4860]

"easy!" pulls out silicone

[@dickgrayson2545]

Just buy silicone...

[@yoram9692]

you can get this enywhere

[@MasterlessVagrant]

$2 at target $4 at home depot

[@w3llplayedMTL]

So you looked up/watched a video on how to make silicone molds, and... you're surprised you need silicone...? Are you dumb?

[@ethansutton4860]

w3llplayed it was a joke xD

[@krazykrissy4350]

will silicone stick to your fingers before and or after you put it in the mixture of soap and water?

[@osteoporosisitself6726]

Who the fuck has silicone laying around at home

[@nancyhuang1398]

i do XD

[@t0nai]

me

[@brandonrenteria5947]

almost everyone you dumbass

[@osteoporosisitself6726]

lol not where i live

[@vertigoboosting2769]

i literally have 5 rolls of silicone and 2 silicone guns in my basement, i have no idea how...

[@katiebrady6601]

Are there specific measurements for the amount of water and soap you use? And should you wait before going at it with your hands?

[@tonybeadle8392]

That is a bloody excellent idea, thank you.

[@marywhite2436]

Hi .. thanks for the info. Can the mold be used to make soap?

[@carlycharlesworth1497]

Hi Agazio, thank you for this video. I have a few questions. If I add a few drops of food colouring to the silicone, will the silicone still work? Also, how long can you keep the silicone before it goes hard, and what should I use to store it in? Thank you. You have a really cool name. I really love your videos thank you for posting them.

[@Yarbullz]

Great tip for an easy way to make a super-cheap silicone mold. THANK YOU!! :D

[@mariateresadilorenzo8715]

ciao! complimenti per il video..volevo chiederti se questo metodo lo potrei utilizzare anche per il silicone trasparente e se è possibile realizzare delle cover per cellulari.grazie ;-)

[@varvarabarbara7471]

is that soap or detergent? looks great

[@PotataMarmelada]

I think it's detergent

[@amybradley4016]

it's dish soap or washing up liquid

[@taylor-om5xs]

Thank you so much this looks much better than with cornstarch I'm going to try it today :)

[@danielgu8247]

Just a quick question, would it be safe to put our finger into it to make a mold of our fingerprint? Also how long would we need to put it in for? Thanks a ton!

[@greenbean2222]

I am creating a Star wars Clone Trooper helmet, and wanted to know whether or not using silicone putty would be a good choice or not, as this would be my first time taking a shot at it. Any ideas?

[@arathduiliath9074]

Silicone putty itself isn't a good means for a helmet unless you mean to cast a mold. Either order 2 part silicone online in a large quantity to mold a sculpted form of the helmet then rotocast it with resin (look it up), try the same with tubes of silicone but mix in paint thinner (acetone works fine) and a little cornstarch to imitate 2-part silicone, or better yet just use foam matting with contact cement to make the helmet. You're on youtube, there's tons of cosplay channels showing tutorials.

[@auroradascenzi7727]

ciao seguo i tuoi video da poco e posso dire che i tutorial sono fantastici e soprattutto sono "veri" xke ci ho provato e i risultati sono ottimi 😘 volevo solo sapere dove acquisti i prodotti che usi e se potevi fare un tutorial apposito 😙😙😙 grazie 💟

[@vkassa]

Awesome !!! I just love your demo video. Can you please tell me how much of liquid soap to use for a bowl of water(approx 3cups pf water ) kindly reply. Thank you very much for the wonderful video

[@donnie9010]

These kinds of molds can be used for molding resin right?

[@Reddiana]

OMG my butt yes

[@Julia-qf8eh]

Great idea. Thanks for sharing with us

[@elflea76able]

Sa fonctionne super bien (j'ai raté avec talc, farine et maïzena) c'est la seule chose que j'ai réussi grâce à ce tutoriel (merci)

[@MemeApocalypse]

this is the first video that I watched of you and I honestly love your diys! Subscribed

[@yaohuwu59]

you have great ideas and I tried this method and it worked.

[@mgoc5010]

I'm gunna try this, because I need some castings of gears, but my only thing is the amounts. I have one of those smaller tubes of silicone, 2.8oz (82.8ml) tubes. So how much water and soap do I need for that size? or does it not matter? okay this one didn't work. After it was dry, my stuff was stuck and I couldn't get it out, I had to cut the mold just to get it out. On to the next tutorial to see if that one works. for the record, I made them thin so they did dry quick. Gears aren't thick. But thanks for the video and the try, it worked up until it was dry and I couldn't remove the item.

[@HappinessCreations]

Thanks very much! But the water is cold or hot?

[@danchodkd4064]

For how many time does it dry (The best tutorial I've ever seen)

[@Andromedalone]

que buena idea ! como la adaptarias para hacer un molde para dilataciones en la oreja ?

[@SaraJoy1]

We've tried this over and over with the clear,the the work time is so short, if you don't catch it at exactly the right time, the silicone is wasted, how did you get yours so well?

[@user-xx2xe5jb6i]

Oooommmmmgggggg amazing~~~~~~~!!!and the rilakkuma cookie is sooooooo cuteeeeee!!!!!

[@hifzakhan1431]

KIIS memo place p

[@mayrakopjansen2814]

Greattutorial thanks for sharing 👏🏻👏🏻👏🏻😘

[@pandoradoes1012]

thanks so much that idea is so great my last one came out really dry and hard because i used corn flour instead

[@emmamontgomery7675]

Do u think u could use this for ur starbucks coffee sharpener lid??