🔥DIY: How to program a Gen 2 Toyota Sienna Remote Entry Key FOB. Easy Walk Through Guide🚗

[@craigsimpson3399]

I thought instructions in writing might be helpful: 1) open driver door 2) insert/remove key twice 3) close/open door twice 4) insert/remove key 5) close/open door twice 6) insert key 7) close door 8) turn on (not start)/turn off 9) remove key 10) press both fob buttons (lock/unlock) for 2 seconds 11) press lock button for 2 seconds (locks should lock) - signaling end of sequence My lock/unlock buttons work, but the sliding door and emergency buttons don't. However, I'll say - good enough! We'll see how long it lasts. I like how you say press both buttons for 1.5 seconds and then press the one button for 2 seconds. You're a better man than I am if you can be that precise!

[@thejungleexplorer]

Thank you for writing out the instructions. I would like to add your instructions to the video description with your permission. Would that be okay with you?

[@craigsimpson3399]

@@thejungleexplorer Sure

[@pqr2726]

This worked!!! Another video said to push the unlock button for 2 seconds then push the lock button for 2 seconds. Pushing both buttons, simultaneously, releasing after 1 1/2 seconds then pushing the lock button for 2 seconds worked great. Thank you!!!

[@margarettang910]

Thank you very much for sharing the video! I followed the instruction and the door can open or unlock very well. But it doesn't operate the sliding door. It is very important for me that I can use the remote to lock or unlock the sliding door. Do you have any idea? Thank you1

[@thejungleexplorer]

Sorry, I don't know why it is doing that. You may need to get it checked out.

[@Theoriginalbubbafett]

This worked perfectly. My repair guy said dealership or locksmith. This saved me so much money! 👍👍👏👏👏👏👏👏👏👏👏

[@I_like_pears]

Another great video! Thanks for talking me through the process of programming the key fob for our 2008 Toyota Sienna (which has more buttons than that one - has buttons for the side doors as well - but programming works just the same).

[@belleofbrightside97]

Ohhhhh man, I'm a locksmith and I dread doing these old Toyota remotes every time because sometimes I can do the magic ritual perfectly after 50 tries and it still won't program 😂 You explained it pretty well though.

[@thejungleexplorer]

Thank you for commenting @belleobrightside4349. I am very happy to hear that you enjoyed the video.

[@ArielBarkerViolin]

Thank you this fixed my keyfob for my 2010 Sienna!

[@thejungleexplorer]

Thank you for commenting Daniel Barker! I am so glad the video was helpful.

[@baba19802000]

Tried its works thanks man

[@nickaleaffan]

Will this work for a 2020 Sienna? And would it be any different for a remote that has the sliding door open/close buttons? Thank you.

[@thejungleexplorer]

No, it will not work for a 2020. the 2020 is 4th Generation Seinna. This guide is for a 2nd Generation Sienna.

[@nickaleaffan]

@@thejungleexplorer Thank you!

[@SyedAli-qz1cp]

Does this method works for 2016 sienna as well? Or have to buy OBD device

[@thejungleexplorer]

Sorry, unfortunately, I don't know the answer to your question.

[@JorgeGonzalez-bt6wz]

Saved me money . Thank you

[@thejungleexplorer]

Thank you for commenting Jorge Gonzalez! I am so glad the video was helpful.

[@edwarddorville9973]

Thanks for the great video will this work with the key with a chip in it? Thanks 🙏

[@thejungleexplorer]

Thank you for commenting Edward Dorville! I am so glad the video was helpful.

[@jimmyting6360]

Cool door button trick

[@thejungleexplorer]

Thank you for commenting jimmy ting! I am so glad the video was helpful.

[@keeleroykim]

If the door open warning is always on closed or open, programming wont work, will it?

[@thejungleexplorer]

Thank you for commenting kee kim! I am sorry, I do not know how to answer this question.

[@CopperPine]

I’ve been struggling to program my factory key remote, my door lock will always cycle twice no matter what I do. And resetting the stored key fobs won’t work either please help!

[@thejungleexplorer]

Thank you for commenting ImSo5! I am sorry, I do not know how to answer this question.

[@steverobinson3829]

I went through the video, wrote down the steps. I tried this 3 times and it didn't work. Does this not work for a 2014 Sienna?

[@thejungleexplorer]

This video was for the older models. The Sienna it was performed on was a 2004 model.

[@steverobinson3829]

@@thejungleexplorer I discovered the 2014, of course it would be the one I have :-) , doesn't support the self-programming. I had to take it to a dealer.

[@alnguyen4396]

my 2010 sienna after re program and all the light such as engine, VSC, and TRAC OFF on. Car run normal but those light still on, how to fix those light back to normal or what wrong about that ? thank you very much for your video and time

[@thejungleexplorer]

Thank you for commenting AL NGUYEN! I am sorry, I do not know how to answer this question.

[@josephzou9181]

Hi there, thank you for you video.It doesn't work on my 2005 Markx, the lock didn't lock after I pull my key out from the ignition, any suggestions?

[@thejungleexplorer]

It is a very time sensitive process. Everything must be done within seconds of each other. It may take several tries. A single error and you have to start from the beginning.

[@lastotallyawesomebleach204]

Will this work on my 2000 sienna?

[@thejungleexplorer]

I do not know. You might look through the comments as many people have reported it to work on various year models. The Sienna in the video was a 2004, so there is a chance it will work on the 2000 model.

[@thejungleexplorer]

Thanks for visiting my channel and watching this video. If you enjoyed it, please punch the 👍 thumbs up button under the video. If you want to be notified when I release a new video, hit the SUBSCRIBE button and ding the BELL 🔔. Thanks for the support!

[@enriquefrias768]

Does the trunk button work? Cause I have a sienna 2007 and it didn't work

[@chachab9239]

Enrique Frias ...great question because trunk area door difficult to unlock.

[@MrHussei10]

worked for me

[@thejungleexplorer]

Thank you for commenting Enrique Frías! I am sorry, I do not know how to answer this question.

[@v1t0s48]

Toyota sequoia 2008 doesn't work

[@thejungleexplorer]

Thanks for the information.

[@maribethstein7424]

This unfortunately did not work for my 2015 sienna. Do you have the code for 2015 sienna?

[@thejungleexplorer]

Sorry. I do not know code for the 2015 model.

[@markrsolomon1]

Did you ever find out how to program your 2015?

[@billjoang]

I just went through this with a 2011 sienna. I used Tom’s key . Com. Look him up, he has a KZbin video on it. It worked for me. All the comments were positive as well

[@aughstanley3573]

What year "Toyota Sienna is it ?

[@thejungleexplorer]

2004

[@waterskidog1856]

How to get the door button to work?

[@thejungleexplorer]

Thank you for commenting Waterski Dog. Unfortunately, this question is too complicated to answer without visual inspection.

[@GinaMariaOpalescent]

What's the point of listing this under Sienna if only lock & unlock functions are programmed? I need my doors to open and close too.

[@thejungleexplorer]

Thank you for commenting GinaMaria Opalescent!

[@GinaMariaOpalescent]

@@thejungleexplorer I got a local locksmith to reprogram it. $350 and a 2 hr drive, but he got it to work in 5 minutes!

[@robertburns9596]

Google showed me how for my 2001 sienna and it was different from what you did and it worked. Tried your way and it didn't work.

[@thejungleexplorer]

Sorry to hear that

[@kikoooooo4619]

i think my remote does not work at all because i follwed all the steps and the door locks and unlocks but my remote just isnt doing anything!

[@thejungleexplorer]

Have you tried replacing the battery?

[@leojarecki3190]

Did not work for my 2012 sienna :(

[@thejungleexplorer]

Thank you for commenting Leo jarecki! I am so sorry to hear that.

[@OscarHernandez-rj1dl]

Yeah the 25 bucks but they don't last that long

[@thejungleexplorer]

Actually, the FOB in this video lasted for years, until the van reached 300k and two deer decided to kamikaze into the front of it. kzbin.info/www/bejne/jHy9i6mshrR7gM0

[@davedibbern]

Ta ta ta day buddy, um, uh, what ?

[@thejungleexplorer]

Can I help you?

[@xaviernj]

i know you meant to be helpful but this was poorly done

[@thejungleexplorer]

Sorry. Did the instruction not work for you?

[@KKKKAAAARRRRYYYYNN]

How do you turn the beep off?

[@thejungleexplorer]

Thank you for commenting KKKKAAAARRRRYYYYNN! I am sorry, I do not know how to answer this question.