DIY How to test a mazda vacuum solenoids

Application for most mazdas.

[@ItchyKneeSon]

Thanks! I just picked up a Toyota/Denso vacuum solenoid from one of those 'bin' stores for $0.25. They're going for $80+ used.🤑 Thanks to your video, I can confidently sell it as 'tested and working'. 🤓

[@MyWatchIsEnded]

Awesome video. I needed to test my "EGR Boost / MAP" solenoid and I had no clue if it was even working even after getting a new one. Now I'll be able to actually test this solenoid. Much thanks.

[@roanvazquez3762]

Thanks . Good and simple explanation .. thanks again..

[@lawrencejames2915]

thanks , RFW light was flashing continuously when ignition was turned on and would only go off when disabled by button . found one solenoid to be faulty and this has fixed the problem .

[@hungrynapps]

My problem was vacuum leak .. i cleaned the jack contacts n zip tied my tubes ..to reduce chances of leaks. For my rfw

[@kaycee9337]

What was your car doing with the bad one

[@juanhinojosa9784]

will a bad solenoid thow a p2004 code?

[@will_n.t]

Was that throwing a p1569 code?

[@kaycee9337]

What was the car soing with the bad one

[@majstorcina1]

What are the symptoms?

[@joro8604]

Thanks!

[@carlosbanegas7577]

thank you

[@yusifresul5567]

Hello Ms. I have the same problem. Is it possible to repair that part?

[@trippleslots]

Nice video .Very few people show how to troubleshoot this part Let me add something I found out I have had two go bad Yet one of them will test good on a bench test like you are doing When on the car though they will not work This will also cause ready monitors to not go ready on a miata 1.8 Portege and miat 1.8 use the same control as well as A escort GT I believe For a PORTEGE IT IS 58.00 FOR A Miata it is 91.00 same part

[@wu64r]

1:57 be careful you'll burn your assistant 🤣🤣🤣

[@timk4502]

Doesn't show how to hook power up! Is it 12 vdc + to both connections?

[@pedrosantiago8026]

Ty ty

[@HotboiEngineering]

I think this might be the cause of the Miata Hot Start issue...

[@TrilogyBPM]

Brap Brap it most certainly can be

[@jesusramos7060]

Hi friends, can you help me traslation this video, í live in Colombia And here talk spanish.

[@arturosanz772]

Básicamente dice que el solenoide al conectarlo a 12v debe hacer un click (sonido). Y el solenoide tiene un flujo de aire de dónde conecta la manguera y sopla Cuando energiza el solenoide, este abre en un sentido y al quitarle corriente ya no fluye.

[@chilatre8009]

P1250