[DIY] I made a trash can that can't see the trash bag

  Рет қаралды 14,764

hanehitsuji/DIYstory

hanehitsuji/DIYstory

Күн бұрын

"Working process"
1. Material cutting (mm)
Main body 10 x 85 x 300 12 sheets (sugi)
Bottom plate 12 x 150 x 340 1 sheet (plywood)
Lid 10 x 25 x 360 2 sheets (sugi)
10 x 25 x 170 2 sheets (sugi)
Bag stopper
10 x 10 x 335 2 (sugi)
10 x 10 x 120 2 (sugi)
* Cut the lid off (cut 45 degrees) and cut it off.
Save the cut-off triangular scraps
Tool HIKOKI FC7FSB slide circular saw
amzn.to/3bH2ks5
2. Plate peeling (joining)
Make a four-sided board of the main body by sticking 10 x 85 x 300 boards side by side with a bond and a clamp with 4 pieces, 4 pieces, 2 pieces, and 2 pieces.
* It is better to hold down the material with a long scrap so that it does not rise.
Tool Kakuri Hatagane 900mm
Https://amzn.to/3bNSl4B
Kakuri Ratchet Bar Clamp 300mm
Https://amzn.to/2RKec1D
3. Assembling the lid and stopper
・ Connect the lid with masking tape, attach it with a bond, and fix it with a clamp.
・ The stopper is fixed with a bond and a nail.
Tools Daiso Clamp & Hammer
Kakushi nail amzn.to/2XHyGuD
Quick-drying bond
4. Assembly of the main body
・ Fix the four stripped plates with a bond and a nail while fixing them with a corner clamp.
・ When 4 sides are completed, attach a bond to the bottom plate, insert it, and fix it with a nail.
・ Fix the triangular scraps that were cut off when the clip was cut off at the four internal angles with bonds.
・ Similarly, attach the scraps to the lid with a bond so that you can get hooked on it.
Tool Daiso Hammer
Kakushi nail amzn.to/2XHyGuD
Quick-drying bond
5. Painting
The cedar board used as the material was left over from the previous wall production, so it has already been painted, and this time only the unpainted parts are painted.
Apply with a waste cloth, dry for 30 minutes, and brush with a brush.
Paint BRIWAX Tudor Oak
Https://amzn.to/3oMkRXX
Tool Daiso shoe shine brush
【Photographic Equipment】
◻️ Camera, lens
SONY α7c ILCE-7C
amzn.to/3nN3AfC
Tamron 20mm F / 2.8 Di III OSD M1: 2 (Model F050)
amzn.to/3nOBOQ5
◻️ Editing software
Lumafusion
◻️ BGM
epidemic sound
Mirror / Ciaran Delany

Пікірлер: 14
@diy-mom
@diy-mom 3 жыл бұрын
わー!めっちゃおしゃれです!!( ΦωΦ )✨ ゴミ箱の角度を変えることで、ストッパーが引っ掛かりやすくなるんですね!なるほど!💡✨ 角のところのマステ活用の手法も鮮やかで素晴らしかったです🤩 そしてコントロールも抜群!😁
@hanecraft
@hanecraft 3 жыл бұрын
よーるくさんあざます♪ ツイートしたからには作らねば!と思って頑張って作りましたよ👍 ゴミ箱は直角のただの箱で、三角の端材を内角四隅に付けてストッパーにしてます! 参考にしてみてください😁
@みっちゃんみちみち-w5y
@みっちゃんみちみち-w5y 3 жыл бұрын
シンプルでいいですね! 45L袋入るサイズ欲しいです 笑 動画が海外っぽくなってきましたね! かっこよく仕上がってて、好きです!
@hanecraft
@hanecraft 3 жыл бұрын
ゴミ箱なんてすぐいっぱいになるのでもってデカいやつ作りたかったんですが、余ってる材料で作れる限界の大きさがこれでした! 海外のdiy見まくってるので自然とそっちに寄っていったのかもですね🤔
@鬼湯汰華
@鬼湯汰華 3 жыл бұрын
めっちゃいい! 素敵すぎる( *´艸`) これプレゼント企画とかでだしてほしいな~(笑)
@hanecraft
@hanecraft 3 жыл бұрын
あざっす!え、こんなんで良ければ全然あげますよ?w
@鬼湯汰華
@鬼湯汰華 3 жыл бұрын
@@hanecraft えぇ!?まじでめっちゃ欲しいです(>_
@hanecraft
@hanecraft 3 жыл бұрын
@@鬼湯汰華 すません!こんなん訂正します!w全力でゴミ箱作りました!🤩
@hanecraft
@hanecraft 3 жыл бұрын
@@鬼湯汰華 いつかプレゼント企画とかもやってみたいですね😁
@鬼湯汰華
@鬼湯汰華 3 жыл бұрын
@@hanecraft プレゼント企画楽しみにしていますね( *´艸`)♡
@armeriagerbera656
@armeriagerbera656 11 ай бұрын
参考にしたいと思います
@ПортфельНЕкурильщика
@ПортфельНЕкурильщика 3 жыл бұрын
отлично получилось
@hanecraft
@hanecraft 3 жыл бұрын
Спасибо!
@蘭-e6m
@蘭-e6m 3 жыл бұрын
サイズ教えてください。
Do you choose Inside Out 2 or The Amazing World of Gumball? 🤔
00:19
[# 18 DIY] Make a trash can that seems to be in a cafe.
8:50
huhu /ちいさなふうふ
Рет қаралды 21 М.
My headphones had a major problem until I built this
5:48
Barnso
Рет қаралды 100 М.
Sanding sucks...until you do THIS
10:23
Northern Works
Рет қаралды 325 М.
[DIY]大型分別用ゴミ箱 その2
15:26
Craft nine / クラフトナイン
Рет қаралды 26 М.
DIYでキャビネット(チェスト)
16:35
JSK-labo
Рет қаралды 83 М.
断熱性大幅UP!DIYで見た目も満足な内窓を作る
24:06
99% DIY / すけチャンネル
Рет қаралды 754 М.