DIY “ISX Cummins Air Compressor” Save Yourself A lot of Time and Money on Repair’s

Click here for merch!
www.caz-gear.com/partner-just...
Click link to enter to win!
gleam.io/uKKhM/justtruckin-cb...
Please like and subscribe! If you are already subscribed please go to our Facebook and share one of our videos! God bless
Fun Mail :
PO Box 80872
Simpsonville SC 29680
Email: JustTruckinwife@gm

[@pp1651]

The first video that I watched made me lean towards taking the 389 to a shop to have the compressor replaced. But then watching your video gave me the courage to do it myself! Thanks!

[@JustTruckin]

That’s awesome Bud 😎🙏🏽

[@AncientPharaoh]

Underrated channel. I’ve seen your video once before by sheer chance awhile back. I was searching for a charged air cooler and came across your video. Amazing details and tutorials. Thank you brother. I learned a lot in this 25 minutes and it felt like 5 minutes. You’ve got my subscription. God bless and be safe.

[@MegaAdviceMan]

Drove bobtail in Cali for 2 years just found your channel love the videos man really helps giving tips to all these new drivers much love 🙏

[@JustTruckin]

😎🙏🏽

[@markiefufu]

I like the tips you give on your repairs. I replaced an air tank this past fall and didn't pre-loosen any of the fittings before removing the tank. It was a bear trying to get those off with the tank trying to roll on the ground. I'll keep that tip in mind for future repairs.

[@ethankim2142]

Hey hey, Justin! Thanks for the tips on the ISX Cummins Air Compressor. I enjoy watching your videos every time you post because there is always something new.

[@JustTruckin]

🙏🏽 thank you

[@joshmcgrai1311]

Always enjoy watching your videos. Good to see you always taking care of your truck yourself. Keep up the hard work and stay safe out there

[@antwineprichard3943]

Thank you for the information I just bought my first truck and compressor went out so this is very helpful on my 07 9900i

[@skipperandy2199]

great job, nice to see others fixing things themselves too,...great channel.

[@jrgreene7617]

Good job.. I’ve changed several through the years and most were non eventful, but I remember doing one on an old Mack that just ate my lunch. I never liked working on a Mack after that 🤣 Be safe out there, always enjoy your vids

[@chriscash9313]

Thanks for this video man i just had to pull one of these compressors myself and it definitely helped

[@JimTomatore]

Those guys down at Haggai in Griffin, GA do awesome work. Don't trust any other shop to work on my tractor.

[@yomoma3719]

Good job on your attention to detail we appreciate it

[@truckinnuttz7038]

whats up brother. you make it look so easy. i take it in to the shop but thanks for the education. now i dont fear getting ripped off

[@staceydavis2016]

Your videos are very educating and a joy to watch learned a lot a give aways are great addition.

[@DallasBoricua]

Nice work my friend. I loved doing engine work. Now I rarely do anything. Great video. Keep-em coming. Be careful out there.

[@mikenatale5269]

Try auto paint paper filters. They work mint in funnels for antifreeze or oil.

[@chrisrice2083]

What a job that was

[@georgeesquivel8623]

Yep at Loves Truck stop in Edinburgh, Texas

[@ElEfectivovlogs]

I have the same issue with the air compression I'm fixing my this weekend thanks for the info God bless

[@wilE6764]

Good job Justin..cool that you show how to do it ..God bless!

[@JustTruckin]

🙏🏽

[@frfrpr]

Reality great content, film and editing

[@110texan5]

GB friend. so true, kn mechanic will save you big time. ❤️👍🇺🇸

[@johnrtrucker]

What ive always done especially in big rigs is never fill any fluids to the full mark, so for my cm2350 i keep the oil a half gallon low from full same with all the other fluids so as everything heats up to operating temps the fluid expands increasing the volume and can start blowing out seals but to this day besides a few external oil leaks ive never lost oil when i dont have an oil leak issue i can go 25k between oil changes and not lose a drop of oil due to piston rings, rear mains ect shes extremely reliable!

[@Flipping_Assets]

Your neighbors must love you with all the toy's lol

[@JustTruckin]

They have some too 🙏🏽♥️very Lucky and Blessed

[@richardtaglienti9477]

This video helped me so much , thank you

[@MyGarage-uu5ld]

I really enjoy your videos. Keep them coming. Ba safe out there. Prayers from Indiana

[@JustTruckin]

🙏🏽

[@markhouck5258]

Thanks For Sharing! ... Self Help Videos ...

[@TruckingToPlease]

Great video. Thanks. One recommendation would be an initial layout of tools needed for the job. We have a full 5 draw on step deck but some fellas might need a tool list for gear like a "big ass wrench"

[@jlhighfield9116]

Just came across your channel, watching some or ur older posts, seem to be a lot of incompetent drivers out there, this came to memory, "clowns to the right of me, jokers to the left" Stealers Wheels. Be blessed, stay safe

[@georgeesquivel8623]

Love you're boys,god bless!! Im replacing my air compressor, but on the road

[@JustTruckin]

TsPs 🙏🏽

[@thatswassupent]

I’m on the side of the road now about to change mine. Thanks for the video

[@Peekaboo237]

What brand did u purchase?

[@MrStephen54]

Yep..followed your instructions to the letter...i don't have a truck......or an engine.....the washing machine is in bits....and the wife is not happy........

[@JustTruckin]

Best comment of the Day 😆🙏🏽

[@spacemonkey2829]

Lol

[@offendedhullen]

Great job on those replacements. You're almost ready to open up your own repair shop lol

[@JustTruckin]

Lol 😆

[@offendedhullen]

And 👍🏼for the tutorial. Now I'm fully prepared to change my air compressor and do my own oil changes

[@ronaldking7180]

Good informative content also check into changing the thermostat. Peace and prosperity

[@BigDaddy-mv9qc]

Thanks Brother

[@jhonnygarcia7396]

Thanks for the video

[@Jeff250lbc]

Nice .. thanks ..

[@tutekohe1361]

You can rinse out the old coolant expansion tank with Sulfamic Acid and it will come out like brand new. The Sulfamic Acid will not harm the plastic.

[@JustTruckin]

Great info

[@ironmank9554]

Note* always slide your tandems. It's makes it easier on your equipment and most importantly easier on you and the loader. Alleviates a lot of that bouncing around.

[@kenmccormick3052]

Using the box end of wrench.

[@truckingwithking3825]

Great video!

[@Truckerdaddy]

If you can do your own maintenance then its a big plus because your saving upwards of $150 an hour at a shop. You'd be surprised how far regular oil changes, fluids checks, greasing, and etc will get you before you have to do the big stuff.

[@markoo83]

Good informative video

[@sturgis007]

Paul jr seems alot more mellow since he started trucking..... :D :p

[@ko9446]

Were the front left lugnut covers off at the shipper? The fitting on the compressor for air put looked a bit worn.

[@nautiquecowboynautiquecowb5317]

Nice job !

[@JustTruckin]

😎🤘🏽

[@jerometaylor554]

I changed out my coolant reservoir and had to remove the new level sensor because it triggered my check engine light. Switched it out with a new sensor and wire combo, check engine light went off.

[@jamesburns2753]

another top notch video. Peace.

[@JustTruckin]

🙏🏽

[@ronaldkilmer2542]

U are a good truck driver

[@vicpetrishak7705]

Detroit Diesel has also turned their radiator overflow tank into a regularly scheduled maintenance item !

[@aaronkenley725]

Not sure if you've changed the plungers in the high pressure fuel pump but there is tsb out to replace the ceramic plungers and rollers with steel copies, not sure if its still warranty work but its a straight forward process, pull the p/s pump back and pull the perimeter bolts for the fuel pump head, plungers are in the head and a magnet will pull the rollers out of the pump bore. I'll see if I can get some tq specs if your interested

[@JimTomatore]

Any 2010 and newer ISX (cm2250, cm2350, x15) needs the fuel pump head rebuilt regularly. They tend to shed metal, often from the cam, tappets or rollers into the oil which is pumped through the engine before reaching the filter. Early 2010-2013 engines had ceramic plungers that would chip, but even the new steel plungers are affected by the underlying problem. X15 has the oil line isolated for this reason, however the pumps still suffer the same fate. Usually goes bad sometime between 400,000-500,000 miles. The parts to rebuild the fuel pump head run about $500 every 400,000 miles as opposed to $4,000 for a new pump or $40,000 to replace an engine with metal debris everywhere. The damage from a pump failure can damage every internal part in the engine from pistons and liners to cam and rockers to bearings and even the crankshaft. Search "ISX fuel pump failure" on youtube and google for videos, pictures and more in-depth info. For extensive ISX info see Rawze.com or Rawze on youtube

[@HolaHola-ul9nu]

Great video, Thxx you

[@JustTruckin]

🙏🏽

[@mikehamilton4357]

Nice job

[@JustTruckin]

🙏🏽

[@stevenjohnson664]

On the bottom mount bolt (through the front panel) is there a nut and washer like the top mount bolt? Or is it just a through bolt was no nut that would tighten on to the air compressor bottom flange?

[@clintonbailey3762]

Enjoy the video but you need to put a conditioner in the antifreeze so that it will come back electrolysis it's in them diesel motors keep getting pin holes in your liners I hope this is some help to you I've been a diesel mechanic for several years and if you don't do it it's just going to cost you down the road cuz you'll have 10 holes in your liners due to the back of electrolysis keep up the good work

[@franktrice1497]

What kind of conditioner? Give me a name. I've got that problem.

[@brianumberger8444]

You can just change the compressor head easy and about half the cost. Leave compressor bolted to engine

[@goodmorningcharlie1243]

Thx

[@hormgandeh2942]

TP for the people off the road, in case they gota wipe?

[@deepace3195]

I know this is somewhat of an old video but I'm getting ready to do my air compressor on same type of engine. Did you drain all of the coolant or just what was in the reservoir to replace the air compressor?

[@Stealthschannel]

A Paint filter is what I use to filter coolant when I reuse it.

[@JustTruckin]

Good idea

[@patryk2497]

when you did your inflame did you get your block cut? there is a very high chance that your liners dropped a bit and is causing your coolant to pressurize.

[@detreknash4505]

👍, some aren't mechanically inclined.

[@roadtrain5910]

lol

[@washmane]

Where did you purchase reman air compressor?? Any links to site? I noticed I have an oil leak somewhere in compressor. Hoping it’s just the gasket.

[@humanoverlord6708]

Oil valve seals on the Red Truck are a thing to be replaced commonly --otherwise a great motor

[@benames9398]

Where do you park your truck when you have to take old red to go to the truck?

[@kenmccormick3052]

Note, that is a star driver and bolt.

[@ceisarsrepair7958]

Torx

[@chrisaustin7731]

Good deal Justin keep them coming. Be safe.

[@JustTruckin]

🙏🏽

[@shanewinters8867]

I need to replace the air compressor mounting gasket do you have to pin the engine to remove and put the air compressor back on?

[@ChilleDxFighteR]

Currently I work in a factory where we have half of the doors where driver opens them for receving and the other half we open on the inside for loading

[@JustTruckin]

That’s cool 😎

[@thehoff1128]

Seems like an easy enough job to change that out if all goes well, but I wouldn't have had the confidence to attempt it already loaded with a delivery due in the morning.

[@JustTruckin]

🙏🏽

[@keithbender5759]

Yea same thoughts I would be missing a gasket lose a nut or compressor would not fit thread strip something would have gone wrong

[@triplehdieselrepair7194]

Keep the old radiator cap because they like to plug up and blow off

[@ironmank9554]

Where do you order most of your parts ?

[@hustonswanson4106]

I’m 24 and been driving half a year. Saved up enough money to buy a truck. Buying one this week. 2016 389 Pete with 500k on it. Even watching all the Cummins isx15 stuff I can. Getting my authority when I turn 25 since insurance is nuts til then. 864 rep up!

[@amdz4696]

What loadboard website do you use Just?

[@THOMAS01ify]

I didn't hv. A house and loved where I live and had the money I would so go back otr I just couldn't do a company truck 60 mph would drive me insane.

[@user-fu4fo5ro1l]

Question do you have to time the engine?

[@vegasfox3896]

If truck building to much air about 140 PSI and didn’t dumping any air out, do you know what is that can be?

[@garyshope8378]

Little late to ask if u pinned crank and timed air comp

[@rushhookhornadventures20]

Do you have a walk in cooler in your garage?

[@ze_german2921]

Where do you buy your parts from?

[@saidabdulle7329]

bro is air compresor coast coolant and fuel isue, because i had coolant is lose when truck is running when i turn off engine coolant is normal also i had raugh idiling first morning start engine first 10 minutes after that is ok i open fuel filter i saw inside water look likes coolant all tha isue come when compresor is noising any advice thanks for you're video

[@chuckychuck]

👍👍

[@nicoc7024]

No specific torques for any of those bolts?

[@timflavin7090]

You let those boys off easy, asking how much candy and no "dad tax"

[@JustTruckin]

😂 wife checks to make sure there’s no “poison” in the Reeses first! 😂 that’s candy tax enough! Lol

[@johnlivulpi3367]

Did you have to time the air compressor or just slap it in

[@joseluisdavalos5162]

I have a dt 466 2005 my air conpresor is boowi g a lot of oil do they offer a o ring seals or repair kit for this part tia

[@michaelmcclure8673]

Can you show how to change a air compressor on a C 16 Caterpillar next?.

[@royandrade2929]

Did you have to time it before putting it back in.

[@stephenreed5522]

Awesome video Mr.Just Truck'in 🚚🚛.. you make it so easy step by step .. Love the two videos yesterday with you & your Family treat or treating 🍬🍭👻& the live stream at your Family house following your channel from Chicago, the wind City 🌬🌬❤❤

[@JustTruckin]

Hey Chicago 🙏🏽

[@stephenreed5522]

Thank you Sir 😊. & always 🙏 Hello South Carolina ❤❤

[@kiethlowry2862]

The reservoir does not have a vent to prevent pressure build up

[@henryg683]

didn’t think you would be able to get this job done today after the wild 😜 halloween 👻 party last night!!!!I should have known better!!!!

[@JustTruckin]

Lol get it done 🙏🏽

[@brianumberger8444]

You can just change the compressor head easy and about half the cost. Leave compressor bolted to engine

[@franktrice1497]

@@brianumberger8444 I would like to see a video of someone just changing the compressor head.

[@waynebrogdon9628]

Torx drive

[@bottlersolutions6739]

What you think of the x15?

[@aMMoNCO]

Great video, just a note, that was a torx bit for the bracket.

[@inezaj8014]

Did you time the compressor ?

[@TruckingWithKimlo]

Was that your problem cause I’m having same issue on my 2007 international to much pressure

[@1nicesonoma934]

I thought by now Chevy would have a 4/6 drop and 22’s on it with a built lsx under the hood

[@adrianspencer7743]

Can you bolt this on a 12 valve?

[@saidabdulle4592]

what about if you fixed head gasket compressor my coolant starting lose when engine is running after i turn engine off coolant overflow i think i have same issue but someone told me fix compressor head gasket i don't know, anyway thanks for showing this video

[@joka2200]

Greetings. Did you change the compressor gasket and did it fix the issue??

[@Ez-ko1gz]

Thanks brother love to save$$$ hope you had a great Halloween 🎃

[@JustTruckin]

You too man 🙏🏽

[@gregburgess6884]

Hey Justin, great job on the video. What clues did you have to indicate compressor failure? I think mine might be going out.

[@JustTruckin]

Biggest one is it takes a longer time to fill 😎🙏🏽

[@gregburgess6884]

@@JustTruckin thanks