DIY カリンバの作り方 How to make a kalimba.

サペリの板が手に入ったのでカリンバを作りました！
初めて作ったので色々と不手際もありますが、大目にみてください.
カリンバはアフリカの民族楽器でサムピアノやハンドオルゴールと呼ばれています。弾いてると眠くなります。
I made kalimba use sapele.
Klimba sound is sounds good.
ご視聴いただきありがとうございます。
今回の動画ではサペリマホガニーからカリンバを作りました
工程
１木材を１８cmに切断し、切った木材を１８cm x １３cm に加工します
２再度１８cmに切断し、１８cm x ３cm と１３cm x ３cmに加工します
３加工した３枚の板を縦に半分に切ります
４半分に切断後、切断面に鉋をかけ平面にします
５鉋を使い全ての板の角を45度に削ります
６「２」で切り出した４枚の板を張り合わせて箱型にします
７輪ゴムで固定し接着剤が固まるのを待ちます
８裏板にドリルで８mmのトレモロ用の穴を二つ開けます
９表板にホールソーで２２mmのサウンドホールになる穴を開けます
１０１.５cm x １３cm の棒を二本作ります
１１一本をかまぼこ型に加工しナットを作ります
１２もう一本は中心に溝を掘り、鉄棒を接着剤で固定しサドルを作ります
１３表板にナット、サドル、ブリッジを取り付けます
１４全てのパーツを接着します
１５リンシードオイルでオイルフィニッシュをします
１６ブリッジにキーを取り付け、チューニングをします
１７完成です
サペリマホガニーは世界三大銘木のマホガニーの代わりに使われている木です
ギブソンやフェンダーなどの有名ギターブランドでも使われています
今後も多くの動画をアップロードしますのでよろしくお願いします
材料　木材：サペリマホガニー　厚さ１cm
　　　接着剤：タイトボンド
　　　　　　　エポキシ接着剤
　　　リンシードオイル（亜麻仁油）
　　　カリンバ用ブリッジ
KZbinでは他にも多くの木工・レジンの動画をアップロードしています。
気になる方はそちらも併せてご覧ください。
KZbinチャンネル：Tengu craft天狗
Twitter： / tengoooooooood
Instagram： / tengucraft
Thank you for watching! ご視聴ありがとうございます。
Please subscribe　チャンネル登録お願いします。
サブチャン： / @tsukumorepair6914
twitter　 / tengoooooooood
Insta / tengucraft
Mail [e-mail]
カメラ camera amzn.to/372VTMX
使用レジン Resin　amzn.to/2LsxST9
ベルトサンダー　Beltsander amzn.to/2LqxoNg
ルーター　Router amzn.to/2LnBLc5
ボール盤　Drill Press amzn.to/2IJ63bo
研磨剤　Polish paste amzn.to/2LDGrKL
シリコン　Silicon amzn.to/2PNVyHh
スケール　scale amzn.to/2PNYG5Z
旋盤 lathe amzn.to/2HMuWRo • DIY 電動ドリルで旋盤の作り方 How t...
バイト　amzn.to/2JP6ilv

[@rassamassa_]

3:42 *Scratching wood sounds* Subtitles: Music

[@kelthekid6940]

Deaf people: *groovin*

[@i_was_just_kidding_ah_dont_hit]

KZbin thought the video is *Benny benassi- satisfaction*

[@benjaoliva3383]

* me, search how to make a Kalimba *Video: you need a lot of kalimba tools to make a kalimba* * Again me, search's how to make kalimba tools to make a kalimba

[@wavesrasalhadd7572]

Good luck 👍

[@samsimpleway6007]

I went here to save budget.

[@somosprolongaciondelsolasu2053]

dont "look 4 it" ( tools 2 "Made") MAKE IT DUDIEEE = just = ¡¡ make it !!! ad nothing about "good lucks" JUST D-DOOO = IIIT !!!...wish u the most abundant "luck" ¡¡ just make iiittt !!! ( just in case i *would YES* done it BUT PRIOR to watching this !!....leave all such guys on their owns TRUST ME !! : )

[@t6amygdala]

@@samsimpleway6007 I came here because I realised that these instruments had to have been made using basic materials somehow back when Africa invented them

[@riz823]

It's not that expensive, you know? You can just buy it online

[@user-bj3es7gm9b]

海外勢ばっかだから海外自作ニキの動画かと思ったら出てきた塗料的なのが日本語でびびった

[@user-xl3lt6pe3l]

綺麗な木だなぁ

[@user-mv1nw5gc3c]

凄すぎる。。

[@na0tar00428]

（開く前）カリンバDIYできるんだ！参考にしよう！ （開いた後）いや、職人やんか…

[@mimitabu_ura_shiawase]

犬神莉亜 この漢字ってどう見ても聞くじゃなくって開くな気が……… まぁいいやプリン食お

[@dngkshojo]

@@mimitabu_ura_shiawase 動画を「開く」で合っているかと^^

[@dch888]

Great work with simple tools! Great sawing!

[@_molly3000]

It made me so happy seeing you play your kalimba

[@calebj1442]

I love the planer jig you have for the miter joints!

[@chehwadhiabhihendu180]

I like your craftsmanship.

[@romelfranco3379]

estoy impactado de la meticulosidad de los japoneses para hacer artesanias y diseños! es realmente sorprendente

[@lolitawilson4970]

Great work!!

[@ilovebirds2094]

That’s amazing, i have no words!

[@nerveseus7069]

Wonderful work mate.

[@crisheathcliff1417]

Great work

[@MazzaCheewanich]

I am so amazed how he combine the box with wrap tape and rubber band...never thought of that before.

[@GordiansKnotHere]

Late response but that was my exact thought!

[@zhadann_]

That guy has some serious skill This is amazing!!!

[@joshuawest9438]

Wow nice build

[@tengucraft]

Thanks!

[@orion2668]

This is amazing!

[@eugenedemaestri7879]

C'est très beau, un travail de qualité, c'est impressionnant.

[@ozzybargainhunter2245]

LOL..... I love the way way effect at the end, i had a chuckle!!

[@sunstrikersunchild233]

I've seen some kalimba making kits online, but with flatboard walnut bases. Cool to see how box kalimbas are made. Have not heard one made from sapele wood, the finnished product looks awesome! 🥰

[@Mikichan85]

Amazing how you could be this instrument!!!

[@nu2981]

素晴らしい！Excellent！cool！

[@LanguageStuff]

Cool build video!

[@multi_misa72]

Awesome, now i have to make one.

[@user-lf8mc1ls6v]

自分で作りたいけど難易度高そう😱

[@alurang4647]

6:44 the cat

[@vivianshi9668]

MEOWWWWWWW

[@frankenstein6223]

Soooooo?

[@Akira_ei]

I thought its my cat meowing...

[@user-rd1zd7kj3j]

و بعدها:)؟

[@DeAdHiGh_666]

Very easy to make it

[@CHTvINVENTOREFUORINORMA]

Great work bro

[@doudoub2012]

excellent!

[@betulozgul252]

i think it is wonderful 👌🏻👌🏻👌🏻 lovely😍

[@Remi157]

Wonderful😍😍

[@parmit3915]

OmG, you are so detail! Love to see how the process of making kalimba.. 😊

[@eminaemadi3398]

Well that was satisfying

[@Amina-cs1zy]

У тебя золотые руки ❤️

[@viixine7666]

Title: DIY Me: Excuse me, sir, no one is going to have what is needed to make this!-

[@eggyboi1217]

Many people will have this problem, but the only thing I’m missing is the hand plane and the pull saw. I do have other tools I could substitute with though!

[@gwenshairdye5000]

I actually have the stuff to make this I bought a Kalimba but there wasn’t a wooden part 😔 T^T

[@01LunaMoonDragon]

Yes... But I have a friend who is a luthier...he might make me one.. :D

[@rodellol.5349]

Don't bother making a wooden box and use a solid block of wood instead. It will be much easier.

[@Umski]

I beg to differ, unless you think he was going to use a cereal box and sticky tape to make it?! - he is using basic hand tools and has essentially crafted an instrument from scrap wood on a fold up workbench - watch any 'DIY' woodworking channel and they'd have used a whole bunch of power tools to do the same thing - splitting a board with a saw that accurately is no mean feat (usually done on a bandsaw) so the manner in which he has done it is eminently DIY IMO and yes I do have what's needed to make this, albeit I might go about doing some things slightly differently. It's an excellent piece of craftsmanship :)

[@calebj1442]

Ah the Japanese pull saw, my favorite

[@phillipjohnaraza2583]

nice work

[@Elegante.]

Le tout avec des outils à main, un savoir-faire rare !

[@elianesarnento4829]

Parabéns.

[@savalan2552]

Thank you bro

[@LopsideMakes]

You pulled out that wood and I was like “That’s too much for me, I wanted to build my kalimba out of sticks and mud..” Really cool to see you work though! Good job!

[@arthurvalente8508]

Incredible Luthier

[@syperc]

This was so crafty, very few electrical hardware needed. That was skilful

[@eduardacoimbra1702]

Amazing

[@isaiah-ni5oq]

Wow so pretty for howits made with mostly hand tools

[@alyssagriffin5781]

Woodwork talent

[@dinozaurka7004]

Actually didn't learn how to build kalimba, but there are so many tips.. i mean so useful

[@skymantelevision9654]

Wow!

[@vicro4193]

welp, I thought it was gonna be an easy tutorial lol

[@kom_5979]

I saw you on a slogoman video's comment sayinh I miss josh saying "Hell Yeah!"

[@vicro4193]

Wait wut - btw hey buddy!

[@user-fn2pt4ui1p]

just do one that’s without any holes

[@gregmatchett7110]

It's easy if you just source the wood at better measurements but they probably only get one size.

[@vicro4193]

@@gregmatchett7110 its kinda hard to find custom cut wood around here, normally they just sell a bunch in a pack and they normally have the same measurements on every pack

[@krammi]

this is so beautiful i want to make one for my best friend

[@tako5045]

I want to have you as my best friend 😆

[@jazzie2967]

Aww the fact that you wanted to handmake it will be even more special, h9pe your friend is happy ^^

[@shadowrose1130]

I want a kalimba 💖

[@WyldeChef]

I need to see how he got the keys installed

[@Jettie828]

Okay after many hours of struggling heres how u add the keys. Put all the keys in the bridge holes and keep the top bar in place. After set i taped the sliding buggers. Make sure the tines stick up a bit over that top bridge. Now the bottom wooden bridge thing with the metal bar. Thats going to get shoved in tine by tine sideways. The bridge will be way lowered on the instrument and pushed up after all the tines are on. I went left to right by hand, lift a tine and put it on the lower bridge. Slide said bridge over and add the next tine. Be sure to keep track that your 1st tine isnt slipping off the top brudge or its really hard to pry back on. Best of luck all

[@sevgi6026]

@@Jettie828 respect

[@oreosmooshy]

For any future readers, here’s how I did it. I’m gonna phrase things simply with minimum lingo. First attach your two wood bars to the kalimba body (but do not glue in the small metal bar, leave it off for now). Then screw in the large metal bar. Slide in each of the tines so that they’re resting on the wood on either side, going through the large metal bar in the middle. The fit should be snug but manageable. If you are having trouble getting the tines through, loosen the screws a little bit so that the large metal bar can sit a little higher. Once they’re all in, you will start sliding in the small metal bar along its wooden groove, lifting each tine one by one so that it fits underneath. This will give your tines a tight fit so they can now be tuned.

[@andreeadobre3190]

Wish I read all this before I built mine and murdered my fingers squeezing in the tines with everything else glued and screwed in place.

[@gregoryblair9810]

that is why I came, also. They skip right over the most important part!

[@eggyboi1217]

I really need to invest in one of those pull saws.

[@Saragranjesg]

Asombroso!!!😲😲😲😲😲 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@tengucraft]

Thanks!

[@thyaracastro4752]

Mencanto 😍

[@user-fm5wl3lq2p]

Good job

[@user-fm5wl3lq2p]

What wood is made of?

[@nataviva2562]

Я увидела как делают мою😊 калимбу🎉❤ Спасибо 🌸

[@sheilaezequiel9072]

Adorei o instrumento! Pena ser tão baixo o som...

[@graciapakpahan6530]

Good

[@Angelica-yn9rb]

Hope I can have one🥺

[@sheilaainarafales9774]

Wow great work! I wanna know whats the measurements for this so i can make one.

[@pamelavalenzuela3440]

UN TRABAJO PRECIOSO MUY DELICADO EXELENTE

[@sonycristina]

Amazing!!!

[@PIKACHU-jl3po]

I think it will sustain better if the bridge and backstop is nearer... All in all I enjoyed watching this video tnk u for sharing 💟

[@angelaschrapp3479]

Sehr schönes Video und tolle Grundlage zum Eigenbau. DANKE! Wie heißt bitte diese prima Säge?

[@ziaa4428]

Im so bored so i watched this Ngl this was good

[@DennisGarcia890]

Increíble

[@tengucraft]

Thank you!

[@YourMSG]

Ur hand saw...is sharp Dudee...😂

[@sullivan1390]

fantastico! eu aprecio muito esse instrumento!

[@atlaslearn8885]

Can you post the dimensions for this please?

[@DanielCardenas23]

Who needs to buy one? when you can make one. Lol

[@user-lu7fc2mb6h]

Hand made karinvaas to fan.

[@pqgoes]

you have indeed the hands of a mason. you can easily see that by the way he plays the kalimba. LOL so rough. jokes apart, you made an awesome work!

[@vlasya007]

Все гениальное просто) захотелось повторить, вот только тональность вообще не нравится

[@user-pl9zo9nz5c]

鍵盤を通すところが見たかったのよ〜(笑)

[@madebybobbie]

Also very nice 45 degree bevel shootingboard! What is that yellow coating on top?

[@user-nh9ht4fv5y]

Спосибо большое

[@5pp019]

O diy kalimba!!! :O

[@user-nr7xy4dx2k]

カリンバ作れるの！？ →動画ある！ →あ、そんなに本格的じゃなくて 大丈夫☺️ 買うよりお金かかりそ笑

[@sevgi6026]

Easyier to buy😂

[@JohnPorsbjerg]

Does anyone know wether the quality of the box is very important to the sound quality? I think it would be neat to make a kalimba out of a vintage cigar box :))

[@izakolanko3979]

Should I use a special type of wood or can I use plywood?

[@keterclassscenario6404]

Dose this require a specific type of wood or will any wood do?

[@josephjisa9788]

Sooooo where can you find the hardware and specifications to build it?

[@user-lk8yz6uv3t]

設計図と材料がほしい…

[@tang_kobe]

Can someone give me more details about steps and what's the length when you cut?

[@user-tv9jk8ts7h]

枠の作り方が意外w

[@Apetitegirly]

me:......mmmkay maybe next time

[@MBN_Trons]

The edited cuting speed like dril machine

[@user-in3gt6du9s]

次回「不審者の人と動画内容交換してみた」

[@mohitupadhyay8227]

For how much u will sell it i want to buy it

[@ownternal3953]

muito bom, queria saber fazer isso haha

[@abbyabby6598]

woah

[@lollarpalooza8853]

your keys and key holders are pre-made or machine-made, can you make an all DIY version?

[@justinharrington7842]

Well that could be difficult to get the keys consistent and precise

[@Enviotonin85]

Having to see how much a ready made one cost i guess i rather just op of the ready made ones. But its do much easier to make it using resin

[@Tome4kkkk]

What brands are your black and silver squares? edit: I can see the silver one is Shinwa.

[@tomzietgames9764]

I have a question scratching the wood must that??

[@jksprecast2957]

I think I will make one and add a electric amplifier connection.