DIY lambo door kit installation, Step by step in 2021, camaro

[@JeffreyMitchell-qb5vw]

I was thinking about getting those hinges for my 2011 Nissan Sentra sr I have been working on it for the last few months and was thinking about Lambo hinges

[@trennisjack3016]

I have a 96 gmc Sonoma SLE do u have any Lamborghini doors install videos for it

[@myonlinecarguy1]

I have done the install on that many times, unfortunately i dont have any "how to" videos on it. Sorry my man.

[@trennisjack3016]

@@myonlinecarguy1 ok when I buy the door kit for my truck it should bolt straight up without no cutting right

[@trennisjack3016]

Am watching the video on the black Camaro n it seem those bolt straight up with no cutting

[@myonlinecarguy1]

I believe in that year. You have to cut. If I recall correctly, your factory hindges are welded onto the body side.. So theyll need to be cut off. You should be able to corfirm if they are no bolts holtong it on. It will also be in you instructions as well.

[@myonlinecarguy1]

Thats not a 96 gmc sonoma though. Whole diff vehicle my man. Sorry. Diff car is going to be a slightly diff install.

[@joser.rodriguez-rios4016]

Do you have any video of lambo installation on Mustang 2007 convertible?

[@valpo50]

18:25, are these doors heavy to lift? Sounds like it took some effort to open. Any measurement of force to open? Can a 110lb girl open it?

[@andycortez100]

You have the Link for buy this kit ?!!!🎉🙏

[@sfkillar]

you should develop a harness extension. would make it that much easier and customer friendly to install.

[@myonlinecarguy1]

Not gonna lie. I have very much considered exactly that. Lol. Many times.

[@Ganstacripmoney]

I'm working on a project, I'm putting sum on a 08 Dodge charger I have the universal kit, Can I use my original top holes for the new kit or I have to make new holes in the center??

[@myonlinecarguy1]

Unfortunately with a Universal, you'll have to assume none of those holes will work for your car.

[@quanbrooks5113]

Do you have a video where you take the Camaro fenders off to install vertical doors without speeding up video?

[@daniele7]

I was looking for that part too,sadly he didn’t answer your question 😢

[@JromeWrapsTints]

Thank you for sharing and DIY thing like this can make people learned and save more budget as well.

[@jaronh]

Hey what size allen bolt it to adjust the kit up and down to line up with the door I didn't hear you say the size

[@GerardPodoba-w7y]

What’s the average price to change a strut including part and labor cost on a Camaro?

[@Freeman-g3c]

Hi mate , I have done exactly the same process but at the end my car doors doesn't go down smoothly! Looks like the gas struts doesn't compress! Not sure if you have crossed by this issue!?

[@kidfusion3000]

How about a video showing the wiring harness. I have the kit. I'm almost putting it on myself but I don't know what you're doing to the wires

[@myonlinecarguy1]

Im sorry I couldn't help you in time. We actually ha e the harness video too. Just not edited yet.

[@kidfusion3000]

@@myonlinecarguy1 actually I still haven't done it. If you've got the video post it please. I've been waiting on my zl1 bumper since I'll have to take the front of anyway

[@Nodnarb69]

⁠@@myonlinecarguy1can you guys drop that harness video? Doesnt need editing or anything i need some help please

[@beauthelabdogtricks6415]

Who do you recommend for lambo door installation in the Dallas area? I have a 2018 Canaro ZL1.

[@myonlinecarguy1]

Ah man, im sorry but i dont know anyone in texas. Nobody who does these installs anyway. I can definitely say ive seen some fantastic show car builds out of texas, so theres absolutely talent out there to handle this install for you.

[@jayward6339]

That’s dope

[@Sgt-bmc]

Dude, I just wanted to say thank you for making this video. I was about to do my doors and I figured I'd probably should watch an instructional video, not that I'm an idiot but, I don't know everything and God damn all the little minor things that you showed me, like the part about the shock compression ratio relative to the door weight as I have extra speakers in my door. What a mess I would have made so again thank you, great video!!!

[@kmoney1838]

Did you have to cut/trim any of the fender off for it to fit?

[@myonlinecarguy1]

Always, yeah. That inner lip gotta go. I usually leave about 1/4inch.

[@kmoney1838]

Oh ok. Would a circular saw do the trick?

[@myonlinecarguy1]

I use an angle grinder with a carbide blade.

[@المذنبالسماوي]

Sir, is this piece installed on the doors of the Lexus IS 2010

[@luispadro1515]

Hi, I am glad to watch this. I wonder if I can make you a question? I have brought a Toyota cellica recently, it’s brought lambo door system, however the hydraulic has gone. The problem is that I don’t know how pressure is needed 850 psi or 900 psi? The hydraulic label has been erased. Please can you advise me? Lot of thanks for helping.

[@myonlinecarguy1]

Call the manufacturer of the kit. They will have proper vehicle replacement shocks for you. As they know what comes with the kit originally.

[@Camtsd]

You just stopped filming in one of the most important steps. While adjusting the door when it’s hitting the door striker. So are you telling me just tightening that screw will raise the door by itself? The door is really heavy..

[@daniele7]

Do you need to trim the fenders to fit the kit?

[@myonlinecarguy1]

Only the inner door side. Yes. And only about half that area.

[@j.louis512]

Can you if you want too ...make the door lift higher? Higher than like a 90°? Or even higher? What about open like a regular door instead of that limited opening? What about the gassed air shock can it be replaced w another that lifts higher? & How much do these kits cost?

[@myonlinecarguy1]

None of those extra adjustments are possible. For many reasons. Each kit is to the max the each vehicle is capable of. (Very short reason-door would hit the fender/ hindge pivot point isnt the same anymore/ if ots free to move more it cannot ALSO be limited and tight in the same design) I hope this clears up some of that. On average these kits are around $1k give or take $200. (Again each car is slightly diff)

[@stevemelton4479]

Is it possible for you to make a wiring harness for my 2021 challenger superstock i sent you a commet yesterday steve

[@myonlinecarguy1]

Pm me, I need the VIN #. And I'll see if I can get your hardware.

[@DOUGLASBURNS-z3c]

What is your ruff price for a 2017 Silverado Lambo door conversion

[@johnclark290]

Will the kit work on Australian built ford territory Cheers John

[@lhalidaypn]

How much do you charge to install?

[@masterbuildingcontractingl6743]

HELLO HOW MUCVH DO YOU CARGE ME TO INSTALL AND PROVIDE LABO KIT IN MA 2020 CAMARO ZL1 PLEASE LET ME KOWN THANK

[@MichaelRamirez-p7b]

Where do I find a kit for an 87 grand marquis?

[@myonlinecarguy1]

I dont believe a good one is made. You're probably going to need a shop like mine, near you, to custom make a kit work..

[@gajju6222]

Hello sir can we use only single voice coil of the dual voice coil subwoofer / can we connect one voice coil to one ch and another voice coil to another channel

[@myonlinecarguy1]

This is possible, yes. But not the best way of things. But yes, its possible and would work.

[@gajju6222]

@@myonlinecarguy1 tnks sir

[@myonlinecarguy1]

No worries, goodluck with your system.

[@buddyvangend]

Great video come to Australia please and do one on my car 🤣

[@myonlinecarguy1]

we do a ton of these around here. it really is pretty cool to install. Such a dramatic change to any car/truck

[@gajju6222]

Hello sir I am having a 2 jbl svc subwoffer of 4 ohms 300 rms and sony 4 channel amp wich has a (70w x4 at 4 ohm ) (85w x4 at 2 ohm) at bridge mode it give (175x2 at 4 ohm ) and another amp which is cerwin vega which is mono amp its rating is 150x1 at 4 ohm and 250x1 at 2 ohm plzz tell me which above amp can i use to get a good sound

[@myonlinecarguy1]

I would use the mono amp. But thats just me.

[@gajju6222]

@@myonlinecarguy1how sir plzz tell me sir

[@stevemelton4479]

I have a 2021 challenger superstock i had vertical doors put lambo doors on it i am having trouble with electrical in car radio ac and windows keekin going out they told me they didnot cut wires on car door took it to dealer they told me they spliced doors so they would not watenty anything only 7100 miles on this car .now i have no warranty .any thoughts do you splice wires on the doors

[@myonlinecarguy1]

I build full door harness extensions for my clients. This is going to be a pricy fix. But it is fixable probably..

[@stevemelton4479]

Vin steve melton 2c3cdzl91mh554945 2022 challenger thanks for your help

[@volea1985]

Where can I buy this kit?

[@slickrickdarula9483]

Nice!! Where did your customer get that rear louver I haven't seen one like that

[@myonlinecarguy1]

I can find out, but not untill monday. I think one of the shop staff got it. 🤔

[@slickrickdarula9483]

@@myonlinecarguy1 OK cool yea I would definitely like to know thank you!!

[@myonlinecarguy1]

Ill make sure i message u here monday for sure.

[@myonlinecarguy1]

"Glassskinz", check em out. I didnt forget about u. Just could figure it out until today, lol.

[@thegreatarkanum3037]

Great job , great video .

[@12voltcarsecurity42]

Hello, how much does the installation cost in a 2009 Toyota Corolla and a 2014 Mustang?

[@franciscorodriguez6904]

Wondering if you also do installs??

[@myonlinecarguy1]

Yes we have a fully functioning shop. Was there some work you wanted us to take care of for you?

[@franciscorodriguez6904]

@@myonlinecarguy1 wondering how much for you guys to install Lambo door kit on my 2016 dodge challenger shaker rt plus??

[@myonlinecarguy1]

Each vehicle is diff. Especially depending in the kits. But generally speaking a basic kit+install+harness extensions woukd have that car start to finish somehwere around $1,800-2,200ish.

[@franciscorodriguez6904]

@@myonlinecarguy1 ok thank you! And you located in Delaware right?

[@myonlinecarguy1]

Yes. Harrington specifically .

[@CEOIvan2024]

Where ur shop located?

[@myonlinecarguy1]

We are in Delaware. Harrington delaware to be specific.

[@gonzalezpaintin1]

Donde puedo ir a istalar una puerta asi

[@daniele7]

Where is part 2 of this video?

[@jeremyridley4015]

I'm wondering the same thing

[@chriskarlyoung2much918]

Can you help me find a kit for my car

[@Babytwin_]

Can u turn them back to regular doors?

[@a3stv572]

Yes

[@deemack3719]

I wanna do this to my 2003 Monte Carlo

[@verticaldoorsincusa]

Awesome Video! A+++++

[@myonlinecarguy1]

Im glad you approve. We have been promoting and installing your specific products for years, since 2006 actually. Would love to do an actual sponsored video with you and REALLY showcase you product in a more specific light to our HOW TO: 38k views per month ch. Message me if your interested.

[@gajju6222]

Hello sir i am having infinty 12’’ subwoffer kappa 500 rms watts having a switch for 2 ohms and 4 ohms load adjustment I am having small dout sir if I put the switch in 4 ohms load will watts will be 500 and if I put the switch to 2 ohms load the watts will be 1000 is this true sir plzzz help me to clear my dout

[@myonlinecarguy1]

This will be told to you by the amp. The answer is YES, very possible that amp will give 1000 at 2ohm and 500 if 4ohm.

[@gajju6222]

@@myonlinecarguy1 tnks sir

[@myonlinecarguy1]

Your welcome. Good luck with the system.

[@krissingh3744]

👍👍nicely done

[@myonlinecarguy1]

Thank you.

[@gottistyle1250]

can you install it on my car for me?

[@gajju6222]

Sir small dout if am having a 2 svc subwoofer of 4 ohms each sub of 300 rms if i do the series wiering wat will be the rms out put of the subwoffer and wat will be the rms if wiered in prallel plzz help

[@myonlinecarguy1]

The rms of the spkr never changes does not matter 1 ohm, 2 ogm dvc, 2 ohm, nothing. Only the power coming out from the amp changes.

[@gajju6222]

@@myonlinecarguy1 i thought if doing series wiering it will give 8 ohms load and 600 rms and 2 ohms load and 600 rms in prallel wiering

[@myonlinecarguy1]

Yes the ohms change in series vs 7n parallel, but it doesnt change the subwoofers RMS. And the ohm of the sub tell the amp to give mote or less power based on rms. But the rms of the sub itself NEVER changes.

[@gajju6222]

@@myonlinecarguy1 thank u so much sir for clearing my dout 👏 i am from india

[@myonlinecarguy1]

Your wlecome. Be safe out there.

[@prod.antisocialflexerr]

how long does it take to install?

[@thebeast-zf6jb]

Like 2 months to install it

[@gajju6222]

Sir why some speaker has same rms output and different ohms for example a (speaker rated 80 rms output 4 ohms ) and another (speaker rated 80 rms output 2 ohms) why the rms out put is same but the ohms is diffrent plss clear my doubt

[@myonlinecarguy1]

Rms = how much ppwer it can hold. Ohms= tells the amp how much power to send.

[@gajju6222]

@@myonlinecarguy1 sir both the speakers they or giving same rms power they why they have given different ohms

[@gajju6222]

Sir I am having 2 ch car amplifire its specifications is rms @ 4 ohms is 60 watts and 70 @ 2 ohms and bridged 140rms at 4 ohms why they have given 140 rms on bridge @ 4 ohms as they telling 60 watts a 4 ohms then the rms watts should be 120 on bridge mode why they have given 140 rms on bridge mode sir

[@myonlinecarguy1]

Bridge is an extra way to wire for extra power if you have 1 speaker of 4 ohm only and need extra power.

[@myonlinecarguy1]

Also, it seems as you have 2 diff speakers. They should be both 4ohm or both 2 ohm. .. rms will remain, that wont mayter right now. But you have aquired 2 mismatch speakers.

[@Freeman-g3c]

Great 🎉

[@darinboykins12]

I have a 2000 toen car that I want to put this kit on

[@claudiocipriano7013]

Lindo carro

[@jumaakter1433]

Im denter. your need denter from bangladesh.

[@randyhubbard6537]

When I put a Lambo doors on a 2015 Chevrolet Camaro and I'm going to need a wire harness

[@myonlinecarguy1]

Unfortunately noone makes harnesses. I always have to hand make mine and for clients. But yes.youll jeed an extended harness of somekind. The door is like 1" too far for stretch.

[@randyhubbard6537]

Do you know where I can order it from

[@myonlinecarguy1]

No-one makes one my guy. Im sorry. Truth is, i might create them in time. But i dont have any ready just yet

[@randyhubbard6537]

Do you know when you can have some?

[@myonlinecarguy1]

Whatvis the exact yr and all of your camaro. I'll check on parts here.

[@CmaMobile-c3q]

Thanks for the video doing a 2019 Chevy Camaro SS and the video come to hand very well question do you have to do any shaving on the fender my first time doing it I do car Audio and lighting @cma_mobile_llc my name is Ramon