How to remove curb rash on any wheel rim with a cordless drill!!

[@paulnunya3429]

Nice. I used to do mobile wheel repair. Did 12-15 wheels a day for dealerships all over Phoenix. You really only need to go 120-320-500 on the discs. If you deflate the tire you can get in there better. Also, when you deflate it, you can use playing cards to mask the tire. Then roll a card up and tape it. Then slide the rolled up card over the valve stem to mask it. I could refinish and paint 4 wheels in 45 minutes.

[@cvrpov]

Thanks for feedback mate. I have worked for dealers also and very similar to yourself. I really wanted to keep this one as DIY as poss 👍🏼

[@kimgray1606]

@@MICHIGANMIKE12 Go to church

[@MICHIGANMIKE12]

@@kimgray1606 will do that after you refinish my tyres so they look sharp as I wheel in to church parking lot....want to make good impression on the bishop...

[@kimgray1606]

@@MICHIGANMIKE12 👍😇

[@jr4750jr]

Great advice. Thanks.

[@HUMPTYNUGGET]

Its such a blindingly obvious remedy for kerb damage once you see it ....but you have opened my eyes to it ..never even thought i could do that at all......thanks pal .....

[@cvrpov]

I know haha. When u know u know

[@tactlcal_bacon_bits4773]

Every married man should learn this

[@MichaelTheArchAngel777]

😂👍

[@San-uu7qc]

😂😂😂😂😂 Drive normal and don't hit the curb.. done deal

[@tanyaerskine7657]

lol -- true. And all the men who drive long haul trucks. As a woman who happens to be a mechanic, the curb bite from a woman driving the family car pales in comparison to the body damage I repair on an almost daily basis thanks to their husbands who are trying (and frequently failing) to drive a long haul truck and trailer. Bottom line: everybody does it. Not all of us gals suck at driving 😉

[@San-uu7qc]

@@tanyaerskine7657 🙏🙏🙏🙏🙏 Goddess

[@davidblack4195]

@@tanyaerskine7657 I've been in the car with women who couldnt drive and they knew it. The more dangerous is the women who think they can being oblivious that they really shouldnt. There are a few exceptions. Lizzy being top of the bunch

[@helmar_rudolph]

You just saved me a fat bundle of cash, as my Quattroporte rims were due for a job this summer. Now I'm gonna do them myself. thank you so much for this most useful instruction.

[@cnovalles73]

Brilliant! I just bought a set of used wheels with curb rash on a couple and this just made things a lot easier!!

[@cvrpov]

Glad it helped!

[@Rajjjjjjjjjjjjjjjj]

Don’t think you can get any better than this ! Well done 👍

[@cvrpov]

Thank you! Cheers!

[@vincestyles1030]

I used your video to do my 2010 c300 my wife can’t park 🤣 it took me longer than 15 per wheel however they came out great and I did have them professionally powered coated then rebalanced before mounting them back on the car. Top tip this does work! It saved me a lot of money by doing the prep work. Cheers mate

[@cvrpov]

Great stuff

[@captainamericaamerica8090]

Didn't need to Rebalance. You threw good money away. You could not even weigh what came off. So little.

[@dwell7526]

Hey Vince, where did you get the pad from

[@phademusic4744]

​@@dwell7526its the same one used for doing headlights

[@jhennesay]

I hope KZbin has compensated you well for this gem of a vid. Agree, step by step, well-said, thank you for demo’ing and describing as you go!

[@cvrpov]

It's given me a few crumbs mate thanks for watching

[@industrialdrummer44]

Incredible!!! I was considering paying to get this done on my Lexus (previous owner curbed it), but I am absolutely going to go DIY after seeing this. Thanks for posting.

[@cvrpov]

Great stuff

[@seandrayer208]

How did it turn out?

[@ashlyzwolinski3178]

THANK YOU! This video inspires me to fix my stock wheel prior to painting. I curbed it last winter. Now that winter shoes are about to go on this seems easy enough for me to tackle. Appreciate you!

[@cvrpov]

Glad I could help!

[@Okole.Maluna]

This video boosted my confidence in my cars stock rims. I’m definitely going to use this technique to refresh my girls shoes! 🚗💨 Thank you!

[@cvrpov]

Nice one 👍

[@lillnemo1]

Confidenc in your stock rims..... Wth do you mean? I really dont understand. You were afraid they were goin to break or so?

[@therealsolo23]

The most simplest video ive seen. Well done my dude!

[@cvrpov]

No problem matr

[@af252]

I love how you reply to all new comments!

[@cvrpov]

I try to.. even thought a majority is abuse

[@af252]

@@cvrpov oh no! Oh well keep your head up anyway

[@Orlandojusticenomaga]

Wow thank you, watching something which actually useful on KZbin, how refreshing for a change.

[@cvrpov]

Glad it was helpful!

[@christinekane6059]

Well, you learn something new every day 🎉. Very many thanks for demonstrating how to achieve that task 👏. I've been wondering, for a while, how to improve the trim looking better 😀! Great job ❤

[@cvrpov]

No probs

[@gregtaylor6146]

Very nice mate, clearly explained, and a great help for those of us without all the gucci kit, Thank you.

[@cvrpov]

Thanks for watching Greg

[@lappydog9020]

My wheel damage has been driving me crazy!! Thku so much for the vid!

[@cvrpov]

No problem 👍

[@stevewalker9888]

Dude I’ve been putting this job off for months , the thought of filling and sanding and repeating process. Cheers mate 👍. New sub and liked

[@cvrpov]

Loads easier/quicker mate

[@greghart6310]

Cool tip. I had a blow out the other day and the rim got well worked. Glad to know there is a solution other than buying a new wheel!

[@jhart0512]

thanks for posting this. it's given me the confidence to repair and dip a whole set of wheels on a G37-S i just bought.

[@cvrpov]

Good stuff

[@mckav2358]

Hey Thanks!!! Soooo helpful Never in a million years would i have worked this out Thanks so much

[@cvrpov]

Thanks for watching

[@rotfan77]

Great video mate, thanks for spreading the knowledge. Looks quite a bit easier than I thought it would be . And you didn’t have to break the tire down.

[@cvrpov]

Glad you liked the video

[@Felix-tp8ch]

​@@cvrpovhow did you paint it, just paint or what?

[@leegould5306]

Great help for cheap DIY fixes thanks! ideal for those of of us who haven’t got expensive cars and don’t want to pay professionals.

[@Bella-e3x]

Professionals do the exact same thing he is doing but with compressed air tool then paint them if u have confidence in yourself it’s pretty easy to do it

[@stevenss9249]

@@Bella-e3x 1¹

[@heimatliebe116]

I will try this on my old Porsche‘s extra rim that I have laying around.

[@FRohloff-md7kf]

Pl 66

[@FRohloff-md7kf]

Parts catalog for Frigidaire stove model fcrg3052asc

[@davew3377]

Brilliant, I've done my wheels using an old cordless and a sanding disc kit I bought on line for £12. I used acrylic wheel paint in rattle cans and got decent results, all in only cost me a day in the garage and about £50. Thanks for the tips 🙂

[@cvrpov]

Brill 👍🏼👍🏼😎😎

[@nigelpeters2201]

Do you have a link for sanding kit please?

[@tooyoungtobeold8756]

Some places will do it professionally for £50.

[@robberhd3218]

@@tooyoungtobeold8756 Yeah per wheel!

[@insertnamehere4419]

@@tooyoungtobeold8756 Ya...try twice that, and per wheel.

[@peter-e2q]

Brilliant! I’ve just bought a kit and adapter from your links. Best video I’ve seen on this. Cheers!

[@hayleybutler4134]

5 year old car. Perfect wheels. 1 day of complacency, first bit of gutter rash. And now I’m here.

[@cvrpov]

Lol ok

[@747Durango]

This was a good video with fine workmanship and advise. Very thankful you showed the result of the paint job. Looks amazing.

[@cvrpov]

Thankyou

[@JayyBird93]

@@cvrpov how in the world did you match the paint to the wheel or did you repaint the whole thing?

[@allenrj1]

@@JayyBird93 Excellent question, pity there is no excellent answer to accompany it.

[@kevinshenton4745]

Excellent Video as said all Married men need to learn this as soon as we say. I DO

[@cvrpov]

Haha

[@Jlo-i5j]

Absolutely brilliant mate 👍👍👏👏👏👏they wanted here in Hamburg , Germany , €350-400 to do the wheels on my BMW 5 series. Awesome video 👍👍

[@haiticheri4631]

Thanks you so much .. I wen to a shop to get my rims fix they want to charge me $600 … I use your Method only cost me 50$ I’m so happy now cause of your video I did it myself 👍🏾👍🏾🤞🏾👍🏾

[@cvrpov]

Thats great news well done sir

[@haiticheri4631]

@@cvrpov thanks 🙏🏾 again

[@robertz5958]

Cheers and thanks for the video, like many other people I never would have guessed that kerb rash could be so simply repaired! Great stuff mate and thanks again! Regards Robert Z

[@cvrpov]

Glad its helped

[@dr_jaymz]

I'll test that out on the neighbours car when it gets dark.

[@cvrpov]

im sure they will be thrilled

[@robroberts9051]

lol

[@ifyobi5342]

Time to go to jail 👁👀

[@user-ck6kq8zl2i]

When you need an 80s style CD holder to store your 70, 80, 120, 340,500 and 720 sanding pads . Good work tho.

[@foodparadise5792]

@@user-ck6kq8zl2i 80s were cassette and 90s were CD, stop lying.

[@howardkerr8174]

While I have only watched 2 or 3 videos on wheel repair so far, this was far and away the best one yet. The narrative was clearly understandable, and you went step by step showing and explaining the whole process quite well. Unfortunately, I am not sure, I will have to look, but I think the damage done to the wheels on my car by the previous owner may not be repairable, as the " lip " on the wheels is a bit more pronounced.

[@cvrpov]

Thanks for the feedback Howard

[@georgeparker555]

You might have to use bondo to recreate that lip

[@trentdaddydolla647]

​@@georgeparker555until you hit another curb and then the bondo crumbles lol

[@georgeparker555]

@@trentdaddydolla647 either way the wheel would be curbed and would need to be fixed

[@otipivitis5467]

Best application on KZbin thank you

[@cvrpov]

Thanks

[@eg4081]

Excellent video, thank you for sharing the step by step process for restoring the wheel , i will definitely be work on my wheel soon !

[@mikeellis9154]

Great tip for quickly and cleanly cleaning up those wheel scratches. Thanks!

[@cvrpov]

No probs

[@whales302]

Just did mine, had some roloc's, 120, 220 and 320. I used my die grinder, and a drill like yours along with some cotton polishing tips and tripoli compound. The only problems is clear coated Aluminum and painted wheel combo's. It's doable, just a lot more work polishing the sanded aluminum up to the original clear coated sections. Once I had the aluminum polished a little above satin I used some rattle can 2K clear to recoat the aluminum.

[@mpreiss7780]

Yeah I was wondering about that as I believe my Maserati QP does have a clear coating on the rims.

[@cvrpov]

Maybe check out my other wheel repair videos in the playlist for some answers?

[@LaTuyaa]

BALANCE YOUR WHEEL before installing again on vehicle. Knocking material off unevenly as was done will knock your wheel balance off. Will wear out your tire unevenly and will not be as steady on the road, if alignment is off any bit at all.

[@nexpro6985]

yep

[@cvrpov]

Been covered a thousand times

[@ssanford]

You could also do this right before you have your tires replaced

[@petemiller519]

Awesome video bro! I am going to fix my dually rims. Cheers from Canada!

[@Evan102030]

You're a magician! Very useful tricks, glad I found the channel.

[@e.v.gf.p1621]

Looks like.a brand new wheel bro good job

[@cvrpov]

Thanks for watching 🙏🏼

[@alancraigie7951]

Thanks for this video, I’m going to give this a go after watch this as the wheel turned out 1st class. Thank you. 👍🏻👍🏻👍🏻

[@cvrpov]

Good stuff 🤜🤜

[@jeffheineken6709]

I liked the vid, and you’ve shown me an easy way to cheer up some Old alloys cheap. But what’s absolutely priceless is reading your awesome reply’s to some of these comments 😂😂😂 Excellent

[@cvrpov]

Its amazing that you can make a video for no gain other than to maybe help at least 1 guy who's got very limited tools, which is completely free to watch.... and it infuriates certain people to the point that they have to take the time to abuse the guy who's made the video... incredible 🤣👍🏼

[@drumherodrumschool]

@@cvrpov you've helped me a lot! So thank you don't worry about the naysayers

[@peteredwardcraigie]

Brilliant video! thanks so much. Off to screw fix for the attachment now...!

[@cvrpov]

www.paintgear.co.uk probably has everything you need

[@terrycallow2979]

Thank you for that. Had some damage to my wheels from curb and potholes couldn't afford to get them cleaned up professionally but thanks to you I can now get this done on the cheap. Cheers.

[@cvrpov]

No worries mate

[@ChrisCorkPhotography]

Great video, shall have a go at it soon!

[@Darr733]

I used an orbital sander. Little bit more control but same result. Nice

[@cvrpov]

Yep sound mate

[@PETSH0PB0YS1]

Nearly 2,000,000 views ! Good job mate !

[@cvrpov]

yeah crazy. thanks

[@kianadanny]

At least 1,999999 married man had viewed this

[@pjackson65]

Brilliant. I never knew alloys were so easily sandable.

[@cvrpov]

With the drill and sanding pads they are ! By hand its not the case

[@patmccaffery1543]

Best tip on KZbin to date 👏👏

[@cvrpov]

👊🏻👊🏻👊🏻

[@oldgeezer3269]

Nice simple video bud just showing us that’s it’s not hard when you approach it the right way 👌

[@cvrpov]

Thanks for watching pal

[@mtnride4930]

Very nice! I have a very small 2" spot on the wheel of the car and some on the golf cart. I will give this a go looks like a fun little project. THANKS

[@cvrpov]

This should work great. If your in the uk you can buy the kit from www.paintgear.co.uk

[@Alanoffer]

My wife uses the wheels as a gauge to feel where the kerb is , , I’m hoping this will work ,,looks a good idea

[@cvrpov]

Mine does too

[@angelaregan475]

I don't suppose you have ever curbed your wheels!!!!!

[@TittieSprinkles]

​@angelaregan475 No because I have eyes

[@Mitsu1891997]

Good job! We would really appreciate it to see how you did the paint job ☺️

[@cvrpov]

I have a gloss black wheel spraying video to upload soon

[@P8FPV]

@@cvrpov gloss black yak what silver do you use pls😉

[@vtxdaryl]

I need to show this to my wife because she is the one that put them on her wheels. Thanks

[@cvrpov]

Get her involved in fixing them 😅

[@vtxdaryl]

@@cvrpov I wheel

[@michael_caz_nyc]

Great stuff. I'm going to do this to my car. Thanks for the info. oNe LovE from NYC

[@cvrpov]

From UK 🇬🇧 👊🏻

[@wivaquif]

Great video, after all my years I,ve never really considered grinding down alloy wheels , going to give it a try. Thanks

[@cvrpov]

No problem

[@ArchangelHornet]

omg thanks a lot, never thought it could be this easy!

[@cvrpov]

Now it is 👍🏼

[@3swyndal]

I will be doing this to my wheels tonight after work. Great informative video!!!!

[@stephenrose6039]

That is actually insane! Thanks for the tip

[@vincentcarabello8829]

Fantastic work, I didn’t think it was gonna look like that. Just being honest came out really well. Great work brother.

[@rovd4433]

Great video. However, I would have preferred you do both sanding and painting to reflect a who package. I know doing this would involves longer recording time yet you could do videos in bits and merge them. With that said, you're a great DIYer though. Thank you

[@Hazboy-ri2qb]

Thanks! Gonna give it a try. Only thing I was wondering was if there would be enough material removal (including the initial damage) to throw off the wheel balance?

[@cvrpov]

I always recommend balancing the wheel regardless

[@Charlie_Crown]

Very good, nice easy fix and some good useful tips, well presented 👍

[@cvrpov]

Thx

[@BettyKent-n9r]

GREAT JOB!! Your hired!! Thank you

[@rep001]

Ace video cheers, My old Boxster has rims just like those and i was going to have trouble taking them all off to be sent away but i think i will do it myself and see what happens.Cheers

[@cvrpov]

Good stuff 👊🏻

[@tonymorgan2813]

Fantastic video, probably the best video on KZbin! I have a couple rims that look exactly like those, they look bad, I'm going to take my time and do them the exact same way, using this video for reference...again great video!!!💯👍👍👍

[@cvrpov]

Cheers tkny

[@nelsonassis9576]

This is so awesome 👏🏽 and amazing 🤩. So cool and just simple!!! So clever! Thanks very much indeed for your video 👏🏽👏🏽👏🏽

[@cvrpov]

No problem

[@johngoodall7097]

Very useful video and simple depending on the style of the wheels and if you had a Drexel and similar attachments could be even easier so thank you for this video.

[@cvrpov]

Yes true and no problem 👍🏼👍🏼

[@chrisdevalcourt648]

Do you mean Dremel?

[@johngoodall7097]

@@chrisdevalcourt648 misstyped should be Dremel!!!

[@abdullahyusif6362]

Looks really good. I was sceptical till watching it and seeing the results. Thank you

[@robhargraves3805]

I was thinking exactly the same.

[@Justone372]

Beautiful video and work. Thanks.

[@cvrpov]

Thankyou

[@Justone372]

@@cvrpov You deserve it!

[@altonbradley717]

That's great. How about showing how you painted it?

[@secondlooksformen3836]

Great tips. Very helpful. Appreciate you sharing your experience!

[@cvrpov]

No problem

[@aussiecamperman8382]

Add safety factor note. Get rim Balanced after doing this, because you took away metal,it needs to be added back IE: Wheel Balance.

[@planje4740]

- but hi think not about

[@KBarron43]

@@planje4740 but, think not hi about

[@reeceiris4482]

@@KBarron43 hi, think not about but

[@thatsclassified1]

@@reeceiris4482 tf fuck is happening?

[@stevenwalker9013]

@@KBarron43 - hi but not think about

[@dshalley1]

Mmmmmm.......effing bloody brilliance in action! I have a set of forest stage alloys in the garage, I'm off to B&Q mate!!!

[@fadlimohamed2585]

Thank you so much very informational . Cheers from Canada

[@TheChemist2412]

Going to practice on my sisters car before mine lol but thanks for the video, subscribed

[@cvrpov]

Thanks for the sub

[@davidclark3603]

Absolutely brilliant. I instantly subscribed. Thanks!

[@cvrpov]

Great, appreciate the feedback

[@jeremyrigden9200]

Me to.

[@finesse7963]

Basically what the shops do for to much ...great vid my boi ...never knew this and who does'nt own a power drill ...although i hope i dont come across havin to do ...but its a good way to help others or even make lil cash if any wanted to tip a bit

[@cvrpov]

No problem at all

[@irishlad7458]

Don't forget to replace the alluminium with lead balancing

[@howner501]

Amazing, thank you for sharing this tip. I’m off to buy some sanding discs…..

[@cvrpov]

Great stuff

[@wayneyd2]

Don't forget to re-balance your wheel. You may of took off enough metal to offset the balance of the wheel.

[@cvrpov]

Probably need re balancing after serious kerb damage regardless

[@frshswagg1883]

Thanks for the vid fam‼️ it looks brand new‼️ 🙏🏽👌🏽💯

[@cvrpov]

No problem

[@Joe-qt2bw]

All that effort for the wife to curb it again... i’ll pass 😂

[@bigsquatchsasfoot1964]

Nice job bud , don’t listen to the no it all’s ...you’ve inspired me to do mine thanks 👍

[@cvrpov]

Thats what its all about mate. Amazing how many negative comments you get trying to share some knowledge

[@basslinefreshdetailing]

Wow very useful, can't wait to try this!! Thank You!

[@cvrpov]

Glad it was helpful!

[@zamsoniteb8306]

Very informative video but you should have shown the part when you painted the wheels too.

[@martinatkins1199]

I work as a chauffeur for multiple clients. I need to buy you a drink, probably saved me a few thousand. Ta matey.😀

[@cvrpov]

4 cans of bud 🤣👍🏼

[@BWater-yq3jx]

I reckon I'd wait until I was about to change the tyres. Effective though!

[@kirk3077]

Nicely explained buddy...cheers 🥂

[@pollatso]

Brilliant vid no need to remove tyres thank you 🙏

[@cvrpov]

Glad you enjoyed it 👍🏼

[@johnmcaulay5938]

Great video. Does a really good job on wheels. I'll remember this tip. Thanks for that.

[@cvrpov]

No problem

[@robertsemple299]

You forgot one thing. Teach the goose who caused the rash how to park! (It's never happened to me, aaaaahahahaha)

[@cvrpov]

It was a pcp return.. hopefully the next owner has more kerb awareness 🙏 😅

[@derekmulryne4304]

Ah sure you’re great

[@dumbeezy5480]

@@derekmulryne4304 then why you here lol

[@moseszarnighian4204]

I got dizzy watching this video. The camera is keep zooming in and out. Please keep the camera on a stand and let us see what is going on

[@cvrpov]

There is a revised version of this video if you check the wheel repair playlist

[@SuperBullyone]

looks a lot better. Thank you for posting

[@cvrpov]

No problem 👍

[@iandavies1893]

Really good video. Didn't realise it was so easy.

[@cvrpov]

Glad it helped

[@TimKellyMotorclaimguru]

I can give you a better tip for masking the tyre off, rather than taping off. Get a i bin bag, measure from the centre of the wheel with one end of the bag to the rim of the wheel. Give yourself a bit extra.the bit extra pull to a point and cut off. You should now have a bin bag with a hole the same size diameter as the wheel. Stretch over, and you have a completely masked wheel in one go.

[@cvrpov]

I have done this in the past but thanks

[@gordonrettmann8302]

A deck of cards works too

[@bigozzie75]

Great vid! Would you be able to show how to paint the wheel also? Thanks!

[@cvrpov]

I have done now thanks

[@JimR-km1yf]

Brilliant! Simple fix, thanks heaps for sharing, can't wait to cheer my mags up!

[@cvrpov]

No problem

[@chacoarreola3809]

Do you have us mags

[@timothysellers2994]

wonderful video. I’m feeling a little seasick but will remember the technique.

[@ThomasGillot]

Going to try this out on a set of winter wheels I bought for my Audi. Used filler before, but this looks like a better route.

[@cvrpov]

I think it is definitely