DIY LED RING LIGHT.

[@tereenastevielove3230]

Took me 5 minutes to watch then I placed my order on amazon. Thank you! I have been researching different lights and this is the best AND most affordable.

[@KetoKamil]

How big (diameter) of the styrofoam wreath is?

[@mzjourney]

Kamil Sur ,17 inches.

[@sydlaw2941]

Bought everything to make this light and it came out PERFECTLY. Thank you so much. Bought two boxes of lights because I thought one would not be enough but it was. It's so bright lol.

[@mzjourney]

Sydney Lawrence , I use a dimmer switch with mine so I can adjust the brightness. Glad it worked out!😊

[@sammiedav1053]

This looks better than the other tutorials. GOOD Job !

[@FunkyBruja]

@mzjourney - Were BOTH packs used?

[@mzjourney]

iamLacey, Yes I used both packs.

[@FunkyBruja]

@@mzjourney Got it! Ty for responding. :-)

[@harleylover4968]

I don't understand how the lights are attached to the ring.

[@mzjourney]

Audrey Leaton , the lights are tape lights, so just peel and stick them to the ring.

[@thead4]

What is the tep name?? And ring meterial what is buy?????

[@kylishadean7859]

I will be trying this. I like the way that the lights already have the tape on the back.

[@maryam9999]

Did you use two packs of led light or just one ?

[@mzjourney]

Queen Slime I used 2.

[@latoyawilliamssanders7693]

What was the link to where you found the lights? By the way this is the best DIY ring light I've seen yet and I've watched a lot of them!!!!!

[@mzjourney]

LaToya Williams Sanders. Thanks you! You can find the lights here... www.amazon.com/gp/aw/d/B00WQFP3AO/ref=oh_aui_i_d_old_o1_img?ie=UTF8&psc=1

[@ezralord4901]

I agree, best ring light video! Thank you!

[@ezralord4901]

you can use this one www.amazon.com/Adapter-Transformers-Supply-Output-Listed/dp/B00DKSI0S8/ref=sr_1_1?ie=UTF8&qid=1508723861&sr=8-1&keywords=12+volt+led+light+adapter

[@lorystein2156]

LaToya Williams Sanders i agree not only the best diy but also simple and clean👍

[@terricooper7234]

LaToya Williams Sanders yes it is. Very nice and neat. No zip ties at all.

[@MrsFearlessVP]

What size is your styrofoam ring

[@mzjourney]

Angie Spence, 17 inches, I purchased it from my local Hobby Lobby.

[@MrsFearlessVP]

@@mzjourney ok great! Thank you so much

[@PiggieBonita]

I've watched sooo many d.I.y. ring light videos and I have to say your is the most easiest one ive seen. I know I can do this one. Thanks love. Great video and straight to the point. Let me see what else you have on your channel

[@mzjourney]

Piggie Bonita, Thank you😊😊😊

[@jonileonard3936]

I just want to make sure I get enough lights, is this 2 strips of 16.4" 300 LED lights on one ring?

[@DaBesDiva]

On mzjourney ring light video, I can’t tell how are you attaching the led lights around the styrofoam ring.

[@mzjourney]

DaBesDiva, The led lights are tape lights, so they have a sticky backing. You just peel and stick them to the surface.

[@ValerieSofia0408]

how many inches is your wreath foam?

[@nhcharmedone]

That's one of the best looking DIY ring lights I've seen! Very nicely done!

[@mzjourney]

David D, Thank you!

[@markbrady6462]

I have been watching a lot of tutorials on how to make a DIY ring light and yours was by far the cleanest, and one of the lightest ones I had seen. Great Job! Thank you for your video

[@mzjourney]

Mark Brady Thank you!!!

[@vrc5107]

Hello I'm going to try your method .....I was wondering did u have to cut any strips to make them go around with no bulking

[@mzjourney]

Roshandra Crossgrove , no I used the entire 2 packs. I started out laying them closest to the inner rim, and I made sure to not leave any space between rows (laying them as close as possible without overlapping them)Let me know how it turns out! Good luck 😉

[@BeyondSideshow]

It's very nice! But does the reflective silver tape actually play any part in the outcome?

[@mzjourney]

BeyondSideshow , it just gives the lights a reflective surface to bounce off of creating a brighter light. I’m sure it would work great without the silver tape just slightly dimmer.

[@BeyondSideshow]

mzjourney - yeah. just asking because it kind of looks like the led tape covered up all the silver in the front.. i will experiment. thank again for a great vid!

[@TheIndependentRN]

How do you place them on a tripod?

[@mzjourney]

Mental Casualty, I just propped it up on my tripod.

[@TheIndependentRN]

mzjourney Thanks..It is a really nice looking ring.

[@mzjourney]

Mental Casualty , Thank you💖

[@bykendall]

This is the best diy ring light video I’ve seen

[@Envykillsx]

can you link the stuff??

[@tessavera]

This the most beautiful DIY ring light I ever seen

[@mzjourney]

Setiram Day, Thank you so much! ❤️

[@terricooper7234]

I absolutely love your idea! My daughter would love this. She does her own makeup. And I could use it for my home decor videos.

[@mzjourney]

Terri Cooper, Give it a try, it’s very easy and inexpensive! Let me know how yours turns out if u decide to try it😃

[@moniaphoto3492]

How long is the led tape?

[@mzjourney]

Moniczulki Monika , not sure the exact length, but they are pretty long. I used 2 complete packs on this project.

[@katherineyoung5043]

What size wreath was this? A 12 inch?

[@mzjourney]

Katherine Young , I used the 17” wreath.

[@glenbyrd3308]

How did you connect the two strips

[@mzjourney]

Glen Byrd , There is a small clear connector clip that comes with the lights. You just place the end of the 1st set of lights and the beginning of the 2nd set of lights inside the clip and press down to close. Thats it! (I forgot to mention in the vid sorry😐)

[@vp5202]

I think you can wrap the entire thing with butter paper to spread out the light further, it will smooth out the light more.

[@GotGood77]

I wish you would have shown how you wrapped the lights around at least just a lil bit

[@mzjourney]

Bonnie Bonèt , you just stick them on. Starting from the inner side of the ring. Continue taping the lights in a circular pattern (your just taping in a circle making sure that each layer is close to the last) hope that makes sense 😬

[@dianaseverns4607]

Best ring light I’ve seen but I’m confused as to why the tape is on back , how did the lights stick , glue? And what do you use for stand? Instructions are hard to follow

[@mzjourney]

diana severns , Thank you. The lights are sticky on the back just like tape so they stick to whatever surface you put them on. I used a tripod to hold the light up. I just laid it up against the arm of the tripod. Hope this helps 😉

[@dianaseverns4607]

mzjourney thank uuuuuuu I’m going to try it!

[@lindastevens7777]

mzjourney ty for sharing with you did a fantastic job .. GOD bless you ❤

[@dawntobin6463]

Thanks for the idea, will save me a lot of money. Your work is neat. What is the diameter of the ring that you have used?. Thanks

[@mzjourney]

dawn Tobin, Thank you😘 It is 17 inches.

[@dawntobin6463]

Thank you so much. I will make mine today. We dont get the ring here So I picked up two sheets of "Like styrofoam" and will cut it.,,to 17". :-)

[@roqayyahabidey932]

Nail polish colour is too pretty. Which company ? Swiss miss madora?

[@mzjourney]

Roqayyah Abidey, Thank you! I can’t remember what polish this was, it was done at my local nail salon.

[@roqayyahabidey932]

mzjourney , Hmmm , that's fine.

[@roqayyahabidey932]

mzjourney , upload beauty salons tip please forget these electrical and electronics engineering videos. Suitable videos for females are Beauty salons and beauty tips. And foods recipes beefburgers recipes pizza Broast yummy fried rice recipe upload zinger 🍕 recipes and earned million by KZbin Facebook page

[@lg8240]

Thank you for sharing. This is one of the best I've seen. Do you mind clarifying how you laid the lights as far as direction?

[@mzjourney]

Thank you so much! I laid the lights starting on the inside of the wreath in a clockwise direction. (visually imagine you taking your finger and drawing a circle, that's exactly how I laid the lights) I hope I explained it right:)

[@JonnieFox]

I agree. Watched tons. Love this one.

[@mzjourney]

Thank you ❤️❤️

[@mjay2872]

i loved it! Perfect, So clean and beautiful. Will definitely try this. ❤️❤️❤️

[@lifewithjas6109]

This was an amazing video, but would you be able to do a ring lights with items from Walmart ? Hope I make sense ...

[@kylishadean7859]

You did an awesome job

[@mzjourney]

Kylisha Dean, Thank you 😊

[@AbsolutEdd]

Did you use both strips of lights?

[@mzjourney]

AbsolutEdd , yes 2 strips was just enough to complete it.😉

[@rahulsaha3649]

mzjourney how did you connect the two strips together?

[@madtical777]

i keep staring at your hands, they are really nice! good video too !

[@nataliemananghaya7852]

Wow.. glad i found this video of yours 😁

[@lindastevens7777]

Please tell me how you stuck them on and were exactly did you buy everything and the price fantastic job

[@mzjourney]

linda 777, Thank you 😊, the lights are tape lights so they have a sticky backing. You just have to take off the paper backing and stick it on. The styrofoam wreath is from my local hobby lobby craft store. It cost $5.99 but I had a 40% off coupon. The lights and the adapter were purchased on amazon. Link is in comments below.😘

[@impotato4603]

But is that safe tho?? Cuz you use styrofoam...

[@mzjourney]

Wattpad Lover, yes it’s safe because they are LED lights they are low heat.

[@LauraSarchi-hf2xm]

Umm... I tried this but it looked so messy and yours looked so neat! The led adhesive wouldn’t stick to the duck tape so I ended up using clear tape because hot glue and gorilla glue didn’t work! Great vid tho!

[@mzjourney]

MyNameIsLAURA, Thank you. Sorry to hear that it didn’t work well for u.😦 I had to apply pressure to make sure they adhered on mine.

[@LauraSarchi-hf2xm]

mzjourney It’s fine😂, I ended up making do and it works as a ring light so thanks for the idea! This truly is one of the best ring light diy’s out there.

[@tereenastevielove3230]

You have to make sure the double stick tape is not stuck to the backing. That happened to me.

[@MarkFauntleroy]

Nice job! If you wanted to use it for blogging, you'd just need to create some kind of stand for it.

[@AbujaYummyMummy]

by far the best diy thanks, but would have been great if you tried out the light on your face.

[@mzjourney]

JENINENCE, Thank you. I was looking a hot mess while filming so I decided to no show my face lol! I did use it while filming my wig reviews if you would like a reference shot. Hope it helps💛💛💛

[@AbujaYummyMummy]

okay thanks, i will have a look at the wig reviews

[@jackraves7363]

well done, very well 👍 your ringlight shines forward AND backwards, all directions covered.... most DIY omly shine forward....

[@lorystein2156]

Your DIY tutorial is amazing...love it😍good job👍

[@mzjourney]

Lhou Rhein, Thank you!!😘

[@apyoutube5826]

wow nice idea

[@mzjourney]

AP KZbin, Thank you 😊

[@itsplaytimesisvssis9344]

Subscribed #100 Congratulations on 100 subscribers yaay

[@FunkyBruja]

You're the best! Thank you.

[@keenapearce7462]

Best one I've ever seen thanks for sharing ♡

[@marharytabahovich1185]

Love it, gonna make it soon

[@mzjourney]

Marharyta Bahovich ,Great! Let me know how it turns out🤗

[@jaelvictory3483]

The best one I've seen yet !! 😍😍

[@aishakamran2013]

Well done

[@YormanKungOfficial]

WOW 😍😍😍

[@mzjourney]

Thank you!😀

[@daranikolaeva6287]

This is so good. The Ader tutorials for ringlite turn so bad and ugli. Good job 👍🏻👏🏻

[@mzjourney]

😊

[@THEHAUSOFVNGRD]

good tutorial ...

[@wolflovesmoon]

Your hands are gorgeous

[@jigggro]

Such beautiful hands .

[@caballeropaladin1116]

Looks good but you should have shown how bright it looks when filming you face... using your hand was pointless... so i dont know whether to take thectime to build this coz i dont know how good it actually will be... also you should put something overvthe LEDs to filter the light so it looks like one continuous light.... thumbs down for lack of clear demonstration...

[@mzjourney]

Thumbs down to your spelling and grammar 👎🏽 Love and light😎

[@caballeropaladin1116]

@@mzjourney lol, sorry, i didn't realise i was taking an exam when i posted the comment... if you are going to make youtube videos, make sure you achieve the full point of your video.... coz the tutorial was great but without a clear demonstration of it working the way its supposed to be used, makes your tutorial worthless.... not gona use my time to make something if i dont know it works.... and learn to take constructive criticism....

[@mzjourney]

Bandari Chik if u would taken the time to read the comments below you would have realized that I have used the ring light on my other videos. Instead of criticizing maybe you should read🤷🏽‍♀️ it’s fundamental. I can and will do what I please on this channel. You have the option to watch or not. Now please exit stage right if you don’t like the content 👉🏽. I have plenty of time today...

[@caballeropaladin1116]

@@mzjourney lol you are so arrogant... yea i wont watch your videos coz, you dont make sense.... instead of spreading it out over other videos wasting peoples time put it all in one video.... im not going to waste time sifting through comments that i dont know are there and dont know to look for... if you had put it all in one video it would be clear.... and just coz you make videos on youtube does not give the right to talk down to people.... you are just arrogant, rude, and unable to take constructive criticism.... your viewers are your customers, their views pay your wages.... treat them with respect....

[@mzjourney]

Sorry, but this is a hobby not my career. You came to my page and criticized my video that you decided to watch and I’m arrogant because I decided to respond?? Here’s some constructive criticism for you... get off of my page. Have a good day😎

[@renzsilva2621]

Wow, ihope this can help me to make my toutube channel bigger

[@Shadman_siddiqui]

Suprb

[@marvona3531]

✳️👍✳️👍✳️👍

[@franciscoparra1260]

que hueso

[@fatbratdrea4676]

👍👍👌👌

[@VlogdoLisboaOficial]

oi