Tap to unmute

DIY Leg Vise (Abbreviated Version)

  Рет қаралды 37,576

Jess Cretney

Jess Cretney

Күн бұрын

Пікірлер: 17
@fabiomerlin8820
@fabiomerlin8820 Жыл бұрын
Intelligent people make it look simple. Thanks for the video.
@jromhek2070
@jromhek2070 8 жыл бұрын
Thank you very much for this informative video . Keep up the good work .
@TheLayla33
@TheLayla33 5 жыл бұрын
Very good explanation, good job, simple and easy to do. Thank you for this video.
@attheworktable
@attheworktable 8 жыл бұрын
Very impressive - nice work! Can you add a link to where you found the materials for this build? I am in the process of designing my table and gathering ideas and I like both vise videos that you have produced. Excellent and clean work.
@JessCretney
@JessCretney 8 жыл бұрын
+morrixwarlock For the leg vice, the major component that you will need to find/buy is the large lead screw. Fortunately for me I have a good friend who gave me the lead screw. It was from his grandpa's leg vice, and likely at about 100 years old. I found it amazing how well this held up over the years. The phrase "They don't make'm like they used too" definitely comes to mind. For the chop, I made that out of 4/4 quarter-sawn oak that I planed down to about 13/16" and laminated 3 of these, as shown in the video. The rest of the materials are just various wood or decking screws I had laying around. I did reference plans that you download at BenchCrafted website, and while I did not follow them exactly they discuss lots of important features. Benchcrafted sells the lead screws and last I looked your talking $200-350, just for the screw. That's lots of cash in my mind. There are cheaper lead screws, and I know you can buy them at Woodcraft, look for Woodriver item #01H41 Good luck. Please post some pictures when your done on KZbin or other site, and send me the link. I love seeing and plagiarizing others ideas! Any other questions, just ask, I will do my best to answer or at least point you in the right direction. Diameter Screw, 1-1/4", 32 mm Item #01H41 WoodRiver - See more at: www.woodcraft.com/product/01h41/diameter-screw-114-32-mm.aspx#Reviews
@danielgardiner214
@danielgardiner214 8 жыл бұрын
Look for a scaffold leveling screw at your local hardware store.
@20utube10hs
@20utube10hs 6 жыл бұрын
You can find the scaffolding leg adjuster screws on Amazon for not too outrageous a price.
@JoeCarron
@JoeCarron 8 жыл бұрын
How well does the box fan with the homemade filter work for you? That seems like a neat idea.
@JessCretney
@JessCretney 8 жыл бұрын
The filter works fine for removing the fine dust in my workshop. Quick, easy and cheap. Since my shop is in my basement I find that if I don't use this fan will sanding/machining wood, that I (ok, my wife) finds everything in the rest of the basement is coated in fine dust.
@glumberty1
@glumberty1 4 жыл бұрын
Outstanding video.
@JessCretney
@JessCretney 4 жыл бұрын
Thank you very much!
@embwee
@embwee 8 жыл бұрын
Real fine build, and thanks for the abridged version...reminds me of the Stephen Wright joke about drawing a map of the U.S., full (1mile= 1 mile) scale. Any regrets about not putting dog holes in the leg vise before you made the angle cut? Someone, possibly Jay Bates made that comment about his leg vise. I am by no means a pro or a perfectionist. If that were the case, by the time I finish, all of Venice beach would have their roller blades jacked, wheels stripped, and up on little tiny cinder blocks! Thanks again.
@JessCretney
@JessCretney 8 жыл бұрын
Thanks for the feedback. The lack of dogs has not been a real issue, as I can use my other bench vice with the integrated stop. I could still add the holes in the future, since it would be easy enough to remove the leg and mount to my drill press. I definitely would watch Jay's video, which is much higher quality then mine, but I also find it useful to see how multiple people build basically the same thing. Lots of opportunities to plagiarize!
@bilal11
@bilal11 7 жыл бұрын
Hi. Beautiful vise and thanks for the detailed installation tutorial. I was wondering... do you think the Lee Valley tail vise could be re-purposed to use as a leg vise? It looks very similar to the unit you got from your friend. I was thinking of buying a scaffolding leveling screw ala Dema's leg vise videoo from Dema's Workshop KZbin channel but when I found this Lee Valley tail vise, I considered it as an option. I think it would preclude the need to build a custom hub and garter. I'm very curious to hear your thoughts! This is the vise in question: www.leevalley.com/US/Wood/page.aspx?p=41664&cat=1,41637,41659
@JessCretney
@JessCretney 7 жыл бұрын
Yes. That would work fine. I would use the Lee Valley before using the scaffolding leveling screw. This is a much better option. Good Luck!
@bilal11
@bilal11 7 жыл бұрын
Great. Thanks so much for the response!
@dustyhush
@dustyhush 8 жыл бұрын
very cool vice
Hickory Workbench Leg Vise and Dog Holes - 299
22:10
Jay Bates
Рет қаралды 245 М.
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
My Leg Vise
15:50
Sharp Workshop
Рет қаралды 4,3 М.
$24 Wagon Vise - 365
9:07
Jay Bates
Рет қаралды 239 М.
Easy Quick Release Vice Mechanism
14:33
Pask Makes
Рет қаралды 897 М.
Benchcrafted Vice Hardware Review - 8 Months Use
18:18
Matt Estlea
Рет қаралды 178 М.
Fitting the Glide Leg Vise with the Crisscross Retro
14:54
Benchcrafted
Рет қаралды 15 М.
$40 Moxon Vise - Easy to build in an afternoon!
15:06
3x3Custom - Tamar
Рет қаралды 1 МЛН
Building My Version of a Leg Vise
12:18
Mark Hanson
Рет қаралды 54 М.
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
Making and Installing a Leg Vise
12:03
Bruce A. Ulrich
Рет қаралды 34 М.
How to Make a Leg Vise With A Wooden Screw All Hand Tool Woodworking Bench
13:26
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН