DIY Lil Rascal Mini Bike Kit Build

[@charlesharper7292]

Pretty nice, but I think I'll keep an eye out for a junker garage sale/ barn find with a good frame. Thanks for the fun anyway ☺️

[@skepticfucker280]

I see a lot of monster moto e1000 for sale about 150-100bucks, just remove the electric box and it's the same roller as their gas versions and there are a lot of videos on KZbin of people dropping predator 212s in them. So maybe 250 total with new engine and a day or 2 of building.....

[@ihavenoclue7279]

Well do u live near a place called quitman GA there's a junk yard there. We're I bought me a murry mini bike frame for 30bucks with a 301cc on it. All I had todo was rebuild the carb an get 2 tires an a seat

[@karlg1535]

Bought a ct200u clone kit diy for 250$ included everything except the motor which was another 200 shipped

[@GratefulEd907]

Just bought a complete Baja blitz minus the carb and air box for $150 it’s just a 3hp but that’s fine for my 8 year old daughter. Parts are on the way and I’ve already tore it apart and painted it. Putting it back together tomorrow. Also order a new chain and brake caliper so all together about $200

[@samkaplitz9036]

Is there an upgrade for the foot pegs? Like to see folding.

[@benjaminpraska6838]

I like the idea of a DIY mini bike kit, but for that price point not including the motor or mods makes for $1,000 mini bike project. Compared to a Coleman from tractor supply is $599. Thanks for doing the video, but I’d like to see a lower price before I spend the money.

[@againsthell1908]

Yeah its easier to just find a complete frame and just buy the motor etc

[@elijahmccartney2545]

I love go power sports but they really need to lower the price if they want to sell

[@user-neo71665]

They need to lower all their prices since they just sell the same Chinese stuff you can buy on amazon or fleabay for well over half their cost.

[@Agavegaming]

@@user-neo71665 Yeah I noticed that aswell, just a whole bunch of fake ass markups.

[@Nowayjose-z2r]

@@user-neo71665 And they say support local business. I would bet they don't sell the volume needed because people buy on the jungle site. Some, I would argue most, of the items they sell, are made in Texas like the minibike and go-kart frames and the specific parts like top plates, etc.

[@user-neo71665]

@@Nowayjose-z2r The do have a few special parts they make in house but most of everything else is still Chinese crap with a huge markup. I get they buy the crap and ship it over and have to make money on it. I've ordered parts from them and it's cheap chinese crap I coulda ordered 2 day from amazon. They try to make too big of a deal about how they are an american company and from texASS but at the end of the day they just the middle man for Chinese crap.

[@ghomerhust]

dude that little buggar rips! those tillitson motors are no joke

[@bryanmcguire6274]

I can't wait to see that build with that cute lil bike on the back of it

[@techhead976]

Yeah it’s cool and all but for $695 without an engine is highway robbery.

[@RyanTheWebGuy]

And no suspension... Lonnie looked like he might need some ice on his grown after taking that on the grass for 30 seconds.

[@techhead976]

Ryan Watkins It’s crazy what people will spend money on, Especially a useless mini bike like this unless it’s for a toddler. For $695 for a frame could get you 2 Coleman mid size mini bikes or 2 Baja warriors used of course.

[@skepticfucker280]

No fenders...

[@3v068]

For a used minibike or go kart frame, yes. But not for a brand new one. That takes work to make these.

[@DevonFerguson.]

You could probably home build one yourself for half of the price.

[@lizzard7473]

I like that you matched the shirt color. It's a neat little bike. Looks fun.

[@jasongoodin5728]

That's a cool little bike! I know the feeling of sketchy with my old Dixie Flyer with a degoverned GX200 on it and that short wheel base. I've hit 42MPH on mine and I am over 275lb. It's exciting and hair-raising at the same time.

[@edrose8358]

I really enjoyed the show. Great build!!! 🙂

[@fastcarsrule4790]

I bought the Coleman cc100x from Walmart for $279 plus shipping, bought the 212 hemi predator from Harbor Freight for $124.99. Stage One for GPS with shipping for $108 total gives me half the cost of the Lil Rascal and it is very similar in size and performance plus I have a brand new 100cc engine to boot. Love you RBG, and GPS but I agree just cant spend 1k for this.

[@scooott123w9]

Dude that thing is sick

[@kenamay]

absolutely killer design, bro!! A+!

[@raymondsteptore2458]

Installing the grips onto the foot rests with water makes things alot easier. It's an old bicyclist 'a trick yet effective.

[@Tampaboys]

Man these little rascals are so cool awesome video red beard it turned out really great I like your color choices very nice

[@otismurederface]

Seriously epic. Mini bike Monday !!! Plus that super sweet mustache Brax is rocking! 😎

[@rob379lqz]

Nope. Not even close to be affordable.

[@spicydeath82]

Yeah, that seems to be the sales pitch GPS gave all their partners on KZbin to use. Buts really not affordable, especially not right now.

[@mdcool3487]

Not at all with no motor.

[@AmericanDefender]

They sent these things to everyone!

[@SportbikerNZ]

Sweet little unit.

[@abrahampeshko1858]

Thanks for the video RBG and god bless you RBG

[@taoutdoorstorieswithterrya5411]

That's a cool looking mini bike. Thanks.

[@bryans3287]

thinking of buying one to put my kun way 3000w 72v electric kit on . That is such a good-looking mini bike

[@MonkeyMikeOutdoors]

Cool, nice little kit!

[@The_RC_Guru]

“By yourself if you’re lonely” Hes talking to me!!!

[@drewtooker4243]

Make a bolt on chopper front end for it. Little rascal mini chopper would be sick

[@CainSample]

RBG needs to start making these kits 👍

[@diamondthomas7778]

Racing time boys

[@Jack-bv7om]

@Red Beard’s Garage what happened to uploading the Coleman ct200u ex build today? In you stream last week you said you would upload it today.

[@JDWorkshop-wn9tt]

Cool build! Nice product from Go Powersports!

[@hemidart7]

the trick to putting grips on or peg grips spray a little Windex in it and it will slide right on then it will help it stick when its dry

[@greenstuffOG]

Cool bike. Congratulations on all your success!! Keep up the good work

[@michaellipe4889]

The Tennessee way to race a mini bike. I love it

[@JorgeRodriguez-ei2gi]

Great built run cool thanks, keep sharing. Joe.

[@cliftonperkins9071]

That bike is cool looking. Duce an bike billed would be epic

[@modelrc9500]

It’s cheaper to buy a trail master if you upgrade it (which most people will)... not worth it IMO.

[@samsgarage1716]

I like that mini bike.Great video 👍

[@spekky9012]

Love your videos! Can you tell me what performance carbs I can put on a GX240 Honda 8.0 Hp? I love the look of the Nibbi carbs but I haven't gotten any idea if any of them would perform well on it. Thanks -Pete

[@bwxmoto]

5:20 What's happening with the CT200U-EX in the background? 🤔

[@Deucealive75]

Looks like they have it mocked up for a jackshaft. Maybe they are going to do a suspension with a swing arm?

[@bwxmoto]

Yeah looks like it.. a few seconds later I think you can see the swing arm. Rear suspension would be cool on that bike! -Edit. Maybe it wast after that. I thought I saw the swingarm somewhere.. 🤔

[@bwxmoto]

Oh yeah I forgot they said there were going to in that vid a few back..

[@bwxmoto]

kzbin.info/www/bejne/oHbMmoZ6oN91b5Y

[@Deucealive75]

@@bwxmoto Want to see the results of that. Wow. Did you hear his comment at 4:48 in that video? They didn't like the 60 tooth. Said something about "more top end" with the 50. They must not have did that uphill test. The 60 would beat the 50 tooth there, even with the 10 tooth on the TAV.

[@steveott1884]

Yes. Lets see a rear mount for the bike! Thx.

[@javierpagan364]

Hey red beard where did you get that pullstart that thing looks sweet I want it so bad

[@Nitewatch-xc9yz]

Could it be ordered with front suspension?

[@ntj030885]

With the motor hard mounted to the mounting plate like that do you get a lot of vibration? I put a predator in a three wheeler and it vibrates awful. Shakes my hands to bad to hold at high rpm.

[@PatinatruckGarage]

What sizes did you order for the billet bolt covers

[@dormdazzze]

What size is that rear sprocket on the wheel?

[@absolutemadlad2671]

I've got a doodle bug that I keep in the back of my buick century instead of the rear seat.

[@christianruiz7129]

Same here

[@spicydeath82]

For how much it costs I'd rather buy a trail master MB 200. Already have a Coleman CT 200 u ex

[@rodneyws1977]

Have a Coleman 200 and the Trailmaster MB200-2. Obviously I bought the Coleman first and man I wish I had two of the Trailmasters now. I live in a ROUGH area and that little bit of suspension makes all the difference in the world.

[@jaredbudzinski9385]

"sometimes I wish you were mute" I am dead XD

[@jacobsebastien3910]

Tillotson 212 💪

[@Deucealive75]

Quit announcing this in every video. No one cares.

[@jacobsebastien3910]

Tillotson 212 💪

[@localearrape1467]

Ayyyyyyy I was waiting for an upload let’s go!!!!!

[@mwmuller]

Love it! Great video!

[@choppermike5162]

Can a torque converter be used on this rig versus the centrifugal clutch?

[@redsteam1]

To everyone complaining that it's overpriced........come on! Come out with something better for a lower price! This kit is sturdier and more thought out than the cheap models you keep naming.

[@nachodadsgarage1159]

Late Nite Mini Bike building with the Bearded Master

[@410013]

Love the videos guys 😎🔥 this rascal seems like it really gets for the size

[@MrTommytater]

Does Braxton has a dirt stash ?!

[@everywherelocal]

nice video 👌

[@ZVVWVVZ]

Would a predator 212 take a 3/4 as well?

[@MrTommytater]

What tank bands are those ?

[@SKATESPOTSWORLDWIDE]

Red beard, I put a “140” e tube with a .035 jet on my predator 212 and now it’s leaking, what do I do????

[@wheelerdealer4481]

Prime weld welder?

[@masonm255]

Anyone know how too contact gopowesports cuz their number ain’t working

[@rickallen3795]

695.00? That should be the price with the engine. Especially since you gotta paint and build it.

[@chrisperks1112]

Agreed

[@skepticfucker280]

Fenders too!

[@RadDadisRad]

Coleman makes a ready to ride mini bike for $699

[@johnconroy9555]

Loved it but GPS dont ship to Australia and they never have replied to my emails John....Australia....

[@starrider1900]

Here in the United States it's the same thing. Hell they don't even answer the dam phone.

[@marcosmellooficial7544]

👏top 👏top 👏

[@angrybill]

Sorry bud but I don't come here for commercials.Someone is getting greedy. I don't know if it is you or KZbin but I have enjoyed your videos for a while. Thank you for that enjoyment. I will check back from time to time and see if the commercials are yanked. By the way that gas tank looks like a very efficient testicle ripper. Scary stuff.

[@NoahGrace44]

Do you need to weld the exhaust together? Does it come with a welding machine? Because I don’t have a welding machine.

[@AT_motors]

The sped up footage makes it sound like a 2 stroke lol

[@weswestmoreland4270]

I bought one of the superchargers that you used. It really woke up my Grasshopper 21 HP diesel.

[@dumbstuffwithcaden7278]

Love the vids

[@LuchMobGarage]

🤘🏻🐿🤘🏻

[@mifferellis5578]

Can it fit a 212 with a cvt

[@Deucealive75]

Doubt it. A better question would be what does it take to install a CVT? 196 or 212, it doesn't matter. A CVT install would be the same for either engine.

[@mifferellis5578]

taylor yochum thank you for the response Taylor

[@mifferellis5578]

Deucealive75 that’s true but the 212 has the most available performance parts

[@Deucealive75]

@@mifferellis5578 I thought performance parts availability were about the same. But I wouldn't know for sure because I have 5 196's. No need for a 212.

[@mifferellis5578]

Deucealive75 I’m just used to the 212s is why I like them

[@LNRRidez]

I bet this thing moves fast then a Ford Fiesta as well

[@tristan3479]

9:59 wooooooo hoooooooo 10:02 ahahahahhhhhhhhhh

[@emiryolluu6873]

whats the top speed?

[@christophersmithsonian3350]

You put the master link on backwards

[@villijs33321]

Nice bike but that exhaust pipe have to be wrapped, I can see those burn-marks :)

[@andertopmobi9494]

Anda bastante mais não tem amortecimento nenhum...se botasse, um amortecedor monoshok, e um garfo de amortecedor top, ia fica melhor ainda... parabéns, pelos seus projetos, adoro seu canal...um abraço do Brasil Rio de janeiro, do Ander da Top Mobi.

[@Trains_n_stuff08]

Aren’t ya gonna give a give away, what you gonna do with all of those mini bikes and stock engines you took out.

[@vk2aafhamradio]

The solid bar footpegs scare the crap out of me. Young'un will dip one into the dirt, it will dig in & the bike will go flying, probably on top of the kid. Please lop those off & put some folding pegs on it.

[@sandmanbub]

Whoop!

[@josecadena4637]

🔥🔥🔥

[@skylerjohnson930]

The kit should come with shocks

[@sammyvaldez852]

I really wanna get it with my credit card so bad guys 🤠...but but I got drift trike going single axle , taco mini bike needs everything and pocket bike that just need chain and stiffen the chassis with bar since looks like rucus Honda the way it sits and two go karts that need 5/8 bearing

[@3v068]

I hate to be that guy but in this instance, ill make an exception. If you are selling a used minibike frame, its not worth more than 400$. Same with a used yard kart frame. Im not paying more than 400 for a used go kart that was not made for the track, or for offrading with suspension. Please do yourself a favor and have realistic pricing for second hand markets.

[@trailerparkgarage6574]

Will a 440 fit?

[@josepena2024]

you mean 420? don't know but 301 yes

[@trailerparkgarage6574]

@@josepena2024 Meaning Duromax 440

[@minibikemaster9067]

Can you buy just the gas tank

[@richardjohnson2778]

Hey there. I got the 212 installed on my bicycle. While I'm riding it as I give it throttle there is a sound and feel of a bumping. As I throttle. The TAV. I bought it from gas bike. Have ate 3 belts. Slipping like crazy. But I bought the Juggernaut driver thinking thank God my troubles are over. Nope I still have the banging and bumping. I'm thinking it's my Driven . In your opinion with what I've told you.What do you think it is. Dose the Driven go bad . I mean yes they go bad. But it's only 4 months young. Yes the Gov is out waiting on my valve springs the 20 lbs not the 18. But motor is running smoothly. Thank You for being there for all of us out here doing it.

[@rothgararms1860]

👍🏼🔥 I like this whole kit but the gas tank and those gas tank straps are a total fail … look at it !!! 💩

[@fordferrariandtherest2252]

"by yourself if your lonely.." :')

[@andreimecadroyd6707]

Parece um velocípede com motor estacionário potente, boa para quebrar a coluna kkkkkk

[@matthall9093]

Nice kit. But looks like it should be $300 max

[@Ohiocountryboy-se2cn]

I'd just buy a trailmaster

[@jesseshelby4383]

Engine choice is great but I'm gonna have to go on a diet to fit that tiny little frame.

[@wrenchinrust4741]

Citizens arrest! You didn’t stop at the stop sign 🛑😂😂😂😂✊🏼

[@paulbailey4152]

Yeah for that price you could probably buy a welder pipe bender and steel tubing

[@Lfrperformance]

The sped up footage at the 11min mark sounds so much like a weed eater lol

[@chestermcgillicuddy4368]

Cars and Camara's already did and as per the other comments, definitely not affordable for what it is. Good vid though dude!

[@pricetag30]

Still say for $700 it’s over priced for what you get.But hey spend away:)

[@user-neo71665]

They got is for free so yeah they gonna praise the goose turd welded pos. I paid that much and got sent that crap I'd be pissed and sending it back.

[@sifudank]

I am a big guy. I want to see Red Beard ride it. I'm tired of skinny little guys.

[@Greg-db3ib]

Prices on used mini bikes on internet

[@CR4ZYxRY4N]

I got to have it