DIY lowering C4 corvette 2 inches

[@CaseTheCorvetteMan]

I've struck that with the front Bilsteins a few times and had to cut them off. Those were probably rooted anyway looking at how quick they return. I hope you glued the lowering wedge to the frame of the car where it is meant to go and not to the spring top!!! If they come loose from the spring, they will very likely fall out. Come loose from the frame and they are stuck in place provided you cut down the spring retainer clamps the correct amount before bolting them back in, you don't want those loose.

[@yamahchopper]

Yeah that Suspension has seen its better days 😅

[@jimmyscars1337]

I’m assuming it’s sitting lower now aye? Sometimes have to drive around for abit let the car settle… any updates? Because my 1992 c4 sits lower then this and its stock, with good shocks

[@patrickgazley8111]

Thanks for this video, very helpful. I too am trying to lower the front....Im having trouble with getting the lower control arm out. The outside nut I can get to with a 15mm but how did you hold the inside larger bolt for it to stop spinnkng???

[@eflinegarage]

@@patrickgazley8111 I used a large wrench I believe.

[@blakewildgoose5450]

could you also just put the rubber you took out of the front back on the opposite side it was removed rather than cutting the pieces that hold the front leaf in?

[@eflinegarage]

I Suppose that could work, but the new rubber is angled in such a way it gets held in

[@robertoferrari5397]

What material are those inner wheel well liners made of?

[@quintenbarker6620]

What kit did you use to lowercyour car? I really like the new stance.

[@eflinegarage]

Rear bolts. amzn.to/3QftkSZ Front rubber: www.zip-corvette.com/84-96-front-suspension-lowering-wedges.html

[@absoluteoutdoorz9823]

@eflinegarage did it settle at all or is it still in 4x4 mode? Lol, that's what I call mine!

[@eflinegarage]

Yes thank goodness it dropped about 1.5 inches and sits perfectly now.

[@aydenroller5021]

​@eflinegarage you just waited for it to settle? I put the 1 inch bolts on one side to see the comparison and I see no difference...

[@themanthemyththelegend7234]

where did you get the wheels and wondering the size those are sweet!

[@eflinegarage]

I got them from JEGS believe it or not. I believe they are 12 rears, and 10 front. 17’s

[@brianr1036]

The shock shafts have flart spots you need to hold while you loosen that nut...

[@yamahchopper]

Coilovers are the real way to go if ya got the cash$$

[@eflinegarage]

agreed but not for this car and how I’ll use it.

[@greekc4]

I think something went wrong, my rear tucks tire with lowering bolts

[@thinkgolden]

Should've went with a 19" rim

[@eflinegarage]

Not a fan of anything more than 18” on the C4. Personally the proportions are not right after 18. But that’s me

[@thinkgolden]

@@eflinegarage I get it. I got C6 rims on my 94. 18” on front and 19” on rear