DIY Macrame Coaster, Honeycomb Series. Macramé table Decor, Macrame pattern tutorial

In this tutorial video you will see How to make a Macramé Coaster using double half hitch knot!
Many more Coasters & Place mats patterns here:
• Coasters, Table/Place ...
• If you make this Project show it off by tagging @greysmade on social media platforms. I would be happy your Works.
• Copying and reproduction of the videos is not permitted.
*****************
The scheme of cords addition: 80-60-45.
1 - use 12+1 80cm cords for the middle of the pattern;
2 - add 60cm cords in the next row. You will need 6-8 pieces totally, you will feel the gap along the pattern (this depends on the cord thickness and how tight you tie the knots). Try to add them symmetrically along the pattern;
3 - add 45cm cords in the last row. Follow the pattern, sometimes it doesn't require adding the cords.
Not to miss new macramé ideas, please Subscribe to my channel and Click 🔔 to get notification on new video!
Please feel free to comment below. Leave your wishes regarding what kind of videos/macramé products you want to see. It gives me great pleasure to implement new ideas and designs.
Feel free to also check out my Instagram: @greysmade
#macrametutorial #macramediy #macramecoaster #howtomakemacrame

[@teresaporras2207]

Millon de gracias por compartir, hace dias lo vi, y he soñado con hacerlo, y te apareces tú! 🎉 GRACIAS! lo intentaré. ❤

[@GreysMade]

My pleasure♥️

[@9berebonit]

Que hermoso trabajo. Felicidades!🇲🇽

[@GreysMade]

♥️

[@marleneribeiro5099]

Muito lindo seu trabalho! Parabéns 👏 Obrigada por postar! ❤️🇧🇷

[@GreysMade]

Obrigada ♥️♥️♥️

[@carlaoliveira6674]

So beautiful!!! 👏👏👏

[@GreysMade]

Thank you ♥️

[@florentinakontou1561]

Beautiful!!!

[@GreysMade]

Thank you!♥️

[@charanjeetkaur4040]

Too good 👍

[@maricorreia6143]

Lindeza!!😍😍😍

[@GreysMade]

♥️♥️♥️

[@neelambhasin3108]

So beautiful Ma'am 😍 Thank you so much for sharing ❤❤

[@GreysMade]

♥️♥️♥️

[@timelesshappiness5330]

so cute and beautiul :))

[@GreysMade]

Thanks a lot♥️

[@jaquirox6579]

I was wondering how people start a center of a circle with only knots! Thank you! ♥️🙏🏽

[@teresaporras2207]

Me preguntaba lo mismo, hoy lo descubrí. 🎉

[@danam5266]

Thank you for sharing this, it's beautiful! How would you make a big one, for like a table centerpiece? My strings seem to be too short at the end. How would you add to them?

[@GreysMade]

Thank you♥️ so sorry😔 I think there are many videos on how to add a cord if running out. If you want to make a big one, repeat the steps from the previous row in the next round. But it's a good idea to do a remake video for the large one

[@claravera4630]

Me encanta!!!! Y ya lo hice ❤ muchas gracias, como hago uno grande? El doble de hilo ?

[@GreysMade]

you can make more rows, repeating the last row or use another wider cord 🪢

[@GreysMade]

Thank you♥️

[@sashaportal]

This is a beautiful pattern!💛🧶 If I use 5mm cord, how much longer I need to cut it approximately, please? Thank you.🙂

[@GreysMade]

Thank you♥️💛🧡 It depends on the structure of the cord and how tightly you tighten the knots. On average, the cord should be 1.3 or 1.4 times longer for the same pattern. The length of 5mm rope = ~ 1,4 x the length of 3mm rope. I made the same pattern with 4mm braided cord with the same measurements as in the video, but I tighten the knots very tightly. I haven't tried this pattern with 5mm rope

[@sashaportal]

@@GreysMade thank you very much for the detailed explanation!💜 I will try!🙂

[@gyartlessons6596]

When you measure to 12" (30 cm) it is off center-- Is the center design supposed to be not centered? Some of my strings were too short by the 3rd round.

[@GreysMade]

Perhaps I didn't quite understand your question. To begin with, you leave 30cm, and work with longer strands as you make one rhombus pattern out of them. That takes some length of cord. What is in the video is the actual measurements I worked with. The cord consumption depends on the thickness of the cord and how tight you are knotting. I can't give you too exact measurements, maybe I’ll make a remake of this video. Thank you.

[@gangotravibhuti]

Can you tell me diameter of your coaster

[@GreysMade]

18-19cm

[@makaylaking5277]

Beautiful but I found this tutorial really hard to follow.

[@GreysMade]

Thank you♥️ I’ll keep it in mind

[@danam5266]

@@GreysMade I thought it was a great tutorial! Mine didn't turn out as beautiful, but it takes practice. Maybe the last round of circles was my problem, I didn't add the extra string to mine so I had spaces between them.

[@GreysMade]

@@danam5266 thanks a lot♥️ maybe I'll remake this video🤗