DIY Making Cement Concrete Post

[@aragustin]

Very important when making the rebar triangles, to leave an extra inch at the both ends of the rebar so they overlap at the corner (like 2 hooks), this way ensures maximum connection between the steel components when the concrete is poured and u can skip the welding step. they way you made it makes one of the 3 sides not tied at all to the steel structure, beside the welding which can break easily when the post is flexing

[@Peirithous]

Good point🙏

[@eltonshamblen9766]

Salute to young man who mixed amd poured the comcrete. Ive done it. Its work and someone to be proud of. Good family project.

[@ROVITTv]

Thank you so much

[@HappyHouseIdeas]

Helo sir ganyan rin puba bakal na binebenta sa mga hardware?

[@ROVITTv]

yes sir ganyan din

[@AngieTV122]

Watching from dumaguete sir..Ang galing NYU Naman..done sana mapasin mu rin ako..

[@mixnikuya2946]

Ayos na kaalaman yan boss.na shout out ko channel nyo boss sa video ko na Labor cost ng Bakal.God bless

[@ROVITTv]

ay salamat boss.check kita

[@jayanunnithan7395]

Good 👍👍👍

[@ROVITTv]

Thanks

[@mixnikuya2946]

Boss Rovit ayos mga video nyo lalo na ito pag diy concrete post

[@ROVITTv]

salamat boss ha.

[@JoseAlvarez-rz6sl]

What is it a patio

[@nickgeorgie1957]

The ends of the stirrups must not simply close; they must overlap each other. Very important.

[@smeargut1809]

To prevent cracking right?

[@ROVITTv]

thanks you sir for your advice.

[@garyfegan9878]

What paid did you use on the timber before pouring?

[@tricksgum]

It's oil

[@ROVITTv]

use oil sir.

[@SamaesVlogs]

Thanks for sharing this my friend good job

[@ROVITTv]

Thanks for visiting

[@ShafiqulIslam-fp5dx]

I found this video very helpful. Thanks a lot my buddy for doing the awesome work for us.

[@ROVITTv]

thanks for watching my video buddy

[@user-jerry690]

Thank you for sharing this kind of video new subscriber from nonovlogtv ng bicol

[@ROVITTv]

thanks boss.

[@ryanguillermo7184]

salamat sa video bossing

[@ROVITTv]

salamat din boss

[@jigendaisuke]

ration ng buhangin at gravel sa isang sakong cemento boss?

[@LifeofClay]

following din sa sagot nito admin?

[@johnerickperalta3544]

Good day sir Thanks for sharing your idea May i ask ..what size of steel did you use ? Is it 9mm or 8mm

[@ROVITTv]

8mm boss

[@faycalelbekkali7977]

Nombre de la pintura que usaste para pintar la madera, por favor.

[@ROVITTv]

Solamente aceite usado amigo.

[@vincebismar3785]

Pwedi mag tanong po anu po twag jan . Sa black na ni lalagay sa kahoy para dumikit yung cemento

[@ROVITTv]

used oil yon para hindi didikit sa kahoy pag tinangal boss.

[@kh.kompot8634]

វិដេអូ អ្នកធ្វើបានល្អ👍

[@juanramonquintana8239]

Exelente idea maestro

[@ROVITTv]

salamat boss

[@minester625]

anung sukat at haba ng pinutol mong rebar para gawing tatsulok?

[@ROVITTv]

sukatin mo lng na hindi lalagpas sa 4x4.

[@rustommangagom3641]

Fren, Anong sukat Ng haba yong steel na na naghahawak sa tatlong mahabang steel bar?

[@ROVITTv]

mga 9-10 inches boss. basta pasok sya sa 4x4

[@Tamilselvan-gy4kb]

can you show how that iron rod bending clamp is making(i.e.) 5:10

[@ROVITTv]

Yes sir next time I make a video for that.

[@Tamilselvan-gy4kb]

@@ROVITTv I am waiting sir 😇

[@kuyawintvtech8931]

Wow amazing this beautiful event

[@ROVITTv]

Thanks for visiting

[@momiglefoodchannel9271]

Idol, saan mo nabili ung bar bender mo

[@ROVITTv]

hahaha.gawa gawa lang.

[@momiglefoodchannel9271]

@@ROVITTv Ayos 👍👏

[@juan-f1y7k]

boss, anong size ng steel bar gamit niyo?

[@ROVITTv]

8mm lang boss

[@delps9456]

Anu po ang ratio ng mixture and for ilang poste?ty

[@MichaelEvangelista-x2w]

Ano Yung black na pinahid niyo sir?

[@ROVITTv]

use oil boss

[@elainebenipayo6413]

Ratio na gnamit sa mixing?

[@andrewsantos4366]

Hi, amazing video! Ask ko lang sana kung anong concrete mixture ang ginamit mo? thank you.

[@ROVITTv]

wala boss.buhangin ,semento tubig lng yan boss

[@apolakay1520]

Dpat 134 isang balde ng semento 3 balde ng buhangin at 4 na balde bato.....

[@belmoriebartolome438]

Galing naman boss. Boss ilang timba ng buhangin at bato mixture nyo sa isang semento? Gusto ko lang pong malaman.

[@ROVITTv]

mayron ata sa video kng ilang sako ng buhangin boss.

[@johnsarosos4776]

sa isang saku ng cement ilang poste po ba ang magawa?

[@ROVITTv]

9 to 10 boss.depende lng sa yo.

[@boyscout-p3u]

pano yan nilalagay sa lupa sana may vlog

[@ROVITTv]

thanks sa advise.sa susunod boss.

[@romz253]

im new subscriber to your channel.thanks for sharing,better po pinapakita yung dimension at total amount of materials na kaylangan.thanks

[@ROVITTv]

no problem boss.salamat din

[@remcruz4403]

Magkano po ang isang poste sir, at saan location nyo

[@ROVITTv]

300 pesos boss.davao de oro

[@badburn]

use oil po ba yan? yung itim na inapply thanks

[@ROVITTv]

yes sir

[@defthrowde]

ilang cement bag naubos nyo sir sa 9 na poste?

[@ROVITTv]

isang sako boss.

[@marionneaya6618]

Sir anong ratio ng mixture po?

[@ROVITTv]

nasa video yon boss

[@PisongKaninAdventures]

Wala man

[@elainebenipayo6413]

Wala po sa video

[@socratesdoblas2034]

Boss,pila kasakong bas Ang Isa kasakong semento?

[@ROVITTv]

d ko sure kng ilang sakong bas,basta mga 10 na poste sa isang sako na semento boss.

[@teodulocabanerojr]

ilang araw po bago tanggalin sa molde?

[@ROVITTv]

2 days pwede na

[@BlameYourSelfandNotOtherPeople]

nndota aning DIY cement concrete post bai..daghan gyud mag search ani

[@ROVITTv]

mao dyud bai.salamat sa pag bisita.

[@alinesantiago2868]

How much cost per piece?

[@ROVITTv]

300 pesos boss

[@leng2xcastillon767]

Sir good evening, sa USA ka sako semento pila ka buok mahimo concrete post

[@ROVITTv]

yan ginawa namin isang sako yan boss.9

[@jhocarbon6584]

Magkano labor per poste

[@ROVITTv]

gawa lang namin yan para sa farm

[@brettcrawford8878]

You have some talent. You do well to use welders mask so you do not destroy your retinas in eyes and become permanently blind.

[@ROVITTv]

Thank you sir.

[@margeete3058]

Unnecessary no of bars. Just 2 nos. 12 mm bar is more then enough

[@ravenvalenzuela8001]

Anong size ng bakal gamit mo boss?

[@ROVITTv]

pwede na 8mm boss.

[@farmnerstv2311]

Ilang days po curing time bago po magamt ung poste?

[@ROVITTv]

5 days pwede na boss

[@justjc_69]

San to banda boss? Thanks bili ako sana

[@ROVITTv]

davao de oro boss.pwede rin ikaw ang gagawa

[@joynestumbado8813]

Idol I'm watching 🙂 👀 👁️ 👁️

[@ROVITTv]

salamat boss Joynes.

[@pritznelterly1774]

Boss ISA Ka kobiko Pila Ka poste mahimu? Tnx SA video..

[@ROVITTv]

thanks din.hindi pa namin nasukat boss kung ilan.

[@marbleandtoysmanai7359]

Ano po g size ginamit nyo na kahoy?

[@ROVITTv]

4x4x6 boss

[@roykirich]

Wheres the final product??🤔

[@ROVITTv]

nalimutan ko pad edit boss.e upload ko siguro yong part 2.salamat Roy

[@manolitoreyes2899]

ilang gap ng spacing nya

[@ROVITTv]

1/2 sir.

[@ivanromero4523]

Ver a una persona trabajando con sandalias me nerva.

[@ROVITTv]

gracias amigo

[@MangKanor-kc4xk]

Pano mixture nito

[@ROVITTv]

try mo lang isang sako cemento og 4 or 5 sako buhangin boss.kahit 7 or 8 na poste pwede na.

[@MangKanor-kc4xk]

@@ROVITTv walang grava?

[@rogercarrico4975]

I enjoyed the video. But Dude, Get you some shoes when your welding for Pete's sake! 😲

[@ROVITTv]

thanks sa advice boss

[@richyrich4672]

It’s either cement or concrete. Because they are both different from each other.

[@ROVITTv]

ok thank you sir.

[@kathyartieda5049]

ano po sizes ng mga bakal po?

[@ROVITTv]

8mm boss

[@robertaramirezolives4382]

Ilang feet po ang lubog sa lupa? Ilang inches po ang kapal ng poste? Ilan po ang standard na haba ng poste? Thanks po

[@ROVITTv]

2feet ang lubog,at 4x4inch ang kapal at 6 ft yan ang ginawa namin boss Roberta

[@aecs.constn]

Tagpila imong presyo ani bai? Mas mahal na ni kaysa akoang himo ky nag welding paka. Imong triangle stirrups buhati ug lapping o lapasan gamay para mag hook sya. Mas maka tipid ka kung tiewires nlng kaysa welding. Wala naka kuryente na expenses

[@ROVITTv]

hindi ako nag binta.pang sarili lang to boss.

[@aecs.constn]

@@ROVITTv pamaligya boss. Saleable mana

[@monetzambo54]

its very helpful but the welder is not safety..

[@ROVITTv]

thanks boss.next time

[@Bernie5172]

much easier and cheaper to go down to the rural store and buy a ute full of them

[@winifredriola4327]

Gud pm boss magkakano po isa sa concrete post nu

[@ROVITTv]

300 pesos boss

[@joka7316]

Is that aluminum rebar? lol

[@ROVITTv]

no sir.it's steel.

[@tiktokpilipinas6443]

mag kano po estimate isang post magagasto sir?

[@ROVITTv]

Mga P200 siguro boss

[@gonzowarburn7045]

Bottle cap opener ring on the middle finger... That's a working man. Working in flip flops (or Crocs)... That's a dad.

[@ROVITTv]

Yes sir.that's a present from my brother in law from Australia.Thanks for watching my video.I know your a good man.thanks again.

[@MEsmolinski1]

Welding with no helmet or gloves. Absolutely insane.

[@anthonyrandazzo8836]

Lol. My dude is working in flip flops. OSHA is definitely not on location.

[@TomBTerrific]

No OSHA in Philippines

[@nadimpalliKesavaraju-nm5wv]

​@@anthonyrandazzo8836m.noplease

[@apolakay1520]

Hnd nakagitna ang rebar dhl inilapag mo na lang sa semento na may sapin na news paper dpat equal ang distancya sa mga gilid ng poste ....baka may lumitaw pa na rebar sa ilalim pag binaklas na porma tapos ang mga naka usli bakal dpat hangang gitna na nakabent dulo para matibay hindi sa wenelding mo lang sa gilid ng rebar....

[@ROVITTv]

nag try lang boss pang sarili para sa farm.

[@johnbayangan9096]

Walang concrete cover sa likod

[@ROVITTv]

wala boss news papel lang.

[@patrickgibbs2984]

I never watch videos that play music when they could be talking and instructing.

[@rntech2504]

goodjob master

[@edwinmiro5869]

Dapat diha ka sa duol sa proma nag masa utok bah gamita

[@ROVITTv]

deskarte lang nya yan

[@jonathandavedivina0131]

saan po location niyo sir?

[@ROVITTv]

davao de oro boss

[@boyetjavillonar3300]

@@ROVITTv Boss Rovit saan location mo sa Davao de Oro pwede malaman o contact number? Salamat

[@robertcoleman7047]

Good video. Ditch the migraine-inducing music.

[@ROVITTv]

Thank you Sir.

[@joysengeron7382]

,sir anong size po nung flyWood n ginamit m?Salamat po..

[@ROVITTv]

hindi yon plywood boss.kahoy yon 4"x1/2"x6' boss.

[@tommyungab586]

Magkano isang piraso nyan

[@ROVITTv]

250 bintahan dito sa amin boss tommy

[@jayanunnithan7395]

👍👍👍👍👍👌

[@ROVITTv]

Thanks

[@aquiseaprendecomsamuelcarvalho]

SHOW

[@ROVITTv]

thanks,gracias amigo

[@foldingchaise8387]

Need some shoes !!!!

[@ROVITTv]

next time sir.

[@roderickbollozos8517]

Pila ka days puede na tangtangon ang porma boss? Unsaon ka pag contact sa messenger boss

[@ROVITTv]

3 days pwede na.

[@francisoliva5020]

Pwede ba sayo mag order at how much?

[@ROVITTv]

gumawa lang ako pang sarili boss.

[@wakeupandlivelife5513]

The music is terrible. Ruins the process

[@tonymckay6556]

hey man you still use primitive tools. not good

[@ROVITTv]

thanks for advice.

[@davidlaw9686]

Terrible music

[@jamesward5721]

If you're watching & think those ^ won't snap like twigs with any slight impact, well good luck. Adding re-bar does not make a concrete thing "strong", it just means when the concrete breaks, the 2 pieces will still be some-way attached by the bars. In the case of these, you will be able to knock them over with your shoulder once they are concreted in upright. The mix is hopeless, the vibration used is hopeless & yeah - don't copy, because you'll be wasting your time.

[@dandavis8300]

Wouldn't dream of mixing that much concrete without a mixer. It would kill me for one thing... So what would be the right mix? Would redi mix be OK? You're saying his tamping is bad? Agreed; how should it be done? Any small machinery you could use to do it better easier? This video could use some captions. I found the music annoying till I muted it. Interesting video.

[@jamesward5721]

@@dandavis8300 You need to use a vibrating table, the mix needs to be pukka as hell - 40n minimum & readymix is waay better - plus when they make these commercially(I know, used to be involved) they pre-strain the rebar & cast them in long runs - without the prestress, the rebar does feck all. Even with a good mix, good vibration, minus the prestress, the post will still be crap & will break. The pre-stress used runs to tonnes btw - give making them a miss & buy 'em - it's cheaper. :-)

[@dandavis8300]

@@jamesward5721 --Thanks!

[@cowboybuilder]

Mistake you've made is assuming they're for structural construction use. Given the length dimension of the planks are 73 inches then they're 6 foot high. So they're almost certainly fence posts. The hash tags #concretepost #concretefence pretty much show the intent. If you want developing world costs, then you get developing world quality.

[@jamesward5721]

@@cowboybuilder I owned and ran Rock-Cast Fencing for years - we fenced half of new Dublin using concrete post/concrete baseboard & timber insert panels. I didn't make any mistake.

[@zelina364]

Irritating sound

[@AliyaZul-eu4xf]

Jelesin

[@ROVITTv]

thanks for watching

[@nimfalaganapan5620]

I find this video disturbing and not suitable for educational purposes...Welding without safety gloves and wearing sneakers...Kaya maraming gumagaya...

[@ROVITTv]

salamat sa advice,sa susunod.

[@alvirasomera1558]

TANG INANG POSTENG YAN DI NAMAN MAGKAKATAPAT BAKAL SA LABAS HHA

[@throwaway3661]

Not supposed to do the welding on the steel!

[@rashedsanico6158]

Location mo bos

[@ROVITTv]

nabunturan davao de oro boss