DIY Mini Bender from a steel screw

Thanks For Watching Please Subscribe For New ideas
DIY Mini Bender from a steel screw

[@grassroots9304]

This is hands-down the nicest wire bender for this general-purpose wire bending I've seen and I've been searching YT for days and days in my free time. Nicely done. This design is what I'll build. Thank you.

[@lachlanraidal5100]

1:35 as someone who does machining for a hobby, the level of chatter in your drill press setup gave me an aneurysm. 10/10 subscribed!

[@lachlanraidal5100]

6:54 agghhhh the visible runout in that drill chuck! My eyes, my eyes!!! (jokes aside this is a sweet project)

[@DaveSmith-cp5kj]

Just goes to show you all the people complaining about not having quality machines doesn't mean one can't make a good product if we really tried.

[@beakittelscherz5419]

@@DaveSmith-cp5kj yeah.. but see what happens if you start with top notch and suddenly have to work with these machines : you are f#ckt! But starting with less fancy machine park and learn your trade... then after a while invest in the good stuff... You end up with precise Machinery matched with precise skills..😎

[@manythingslefttobuild]

Nice bender, thanks for showing your build.

[@bruisterlenoir6474]

Outstanding. Sometimes I just mute the background but I didn’t even notice the music because I was enthralled in all that excellence. Precision. Beauty. Thank you.

[@sofiatgarcia3970]

Very clever and well done. Thanks.

[@YooProjects]

Spectacular project! You are a talente man 🙏

[@theeastman9136]

Neat little tool, thanks for the method.

[@sddiymakeitworthit7512]

Excellent workpiece and that’s I need it 🙏 👍

[@nobodyhome8148]

should be called DIY Mini Bender from a steel screw, a bunch of steel and a machine shop

[@jimday6244]

Great project well executed. Grate music should be executed.

[@paulfrost8952]

Clamp down the machine vice it’s safer and you’ll get a better finish.

[@freenautilus1]

Super helpful, thanks!

[@thetwogardens6048]

Do you have another method for making a wire bender without using a Drill , Lathe , or Angle Grinder ?????

[@FAUZIAKBAR89]

Metal bender mini..bagus hasilnya 👍👍👍🤝🇮🇩 indonesia

[@veles566]

Отличная работа!

[@khilacemoi6800]

C'est beau à regarder, il y a de la magie dans ce travail 👍

[@jenskmigselv]

At 6:30 - that angle grinder less than a cm from your thumb. Oooh!

[@tiaan_va]

Yeah that was hands down the most retarded thing I’ve ever seen someone do. Definitely not keeping his fingers for long

[@cr4zyw3ld3r]

Are you able to share the schematics for this? I have been looking all over for something like this and this is the only tool that fits my needs.

[@k.venkatachalamk.venkatach5924]

Very useful superb 🙏🙏🙏🙏🙏🙏

[@legendarypolapain9875]

Excellent tool

[@user-sf3jh9si9l]

С наступающим Новым Годом!!! Успехов, счастья и здоровья!

[@joseantonionunez8252]

Buen trabajo... Gracias por compartir tu idea y desarrollo. Me interesa saber si haces este tipo de dadoso trabajo y lo vendes. Saludos desde México

[@johnmoses4667]

How or where can I buy a wire bender😅

[@Trapt4life]

Great idea bro...Music is awsome.,👍

[@SirHackaL0t.]

Nice video but the music doesn’t help at all.

[@gtechnosinc2518]

Watch the video and turn off the music and then replace it with your own music,problem solved, everybody likes their own music, I bet you don't like your young sons music.

[@toolazy6893]

That drillpress vice gives me anxiety lol

[@gustavomaciel787]

Do you make these to sell

[@ddistrbd1]

I like that.

[@nicolasparadis1407]

Loving it!

[@Max_Chooch]

Nice Job, I'm gonna stuff this idea in my idea file towards the back left side of my brain, right next to the file called "How to mechanize chain maille production."

[@Miniatures-And-More]

Awesome ! , Is That A Brass Tube ?

[@playgroundsandboxdigger709]

I am a beginning machinist. I am a avid fisherman. I would be glad to pay you for a drawing or pay you to make me one of these benders. Please respond. Fishing opener here in Mn is May 8th. Thank you very much.

[@GaryTruesdale]

Very nice

[@WhiteCloud37]

что бы согнуть проволоку, которую можно согнуть круглогубцами, мне потребуется целый станочный парк, и самый главный вопрос нахуя мне надо вот так гнуть проволоку? тем более радиус сгибания никак не изменить

[@steve_ancell]

Built the way you want it and will probably outlast a commercially available one.

[@gmanchurch]

Try bolting your vice to the drill press on your next video…..

[@tednelson5277]

Excellent but the music is super annoying and totally unnecessary.

[@dipakargade167]

I have requires this tool for 1.6 mm wire bending

[@homemadetools]

Nice little bender. We shared this video on our homemade tools forum this week :)

[@taufantastis]

music too loud

[@damojfowler]

From a steel screw..... And other bits.

[@MARCOSARMESQUITA]

👍👍👍🇧🇷🇧🇷🇧🇷

[@diymsthuanvt]

verry good

[@squiremc]

Please don't hammer on the open jaw of a vice. It will ruin its alignment and potentially crack castings. If you must use your vice this way at least close the jaws firmly. Just saying...

[@rayhein8205]

I guess everyone owns a lathe to do this DIY project!

[@pipoargenti6912]

well, you need a lot of tools to make that tool...

[@MastaRhee]

Music is fine with me. Better than just machining sounds, which is soothing to me

[@hardeepsingh6158]

Interested in buying

[@shekhareknathdeore6341]

👍

[@acemany1126]

Can you please make me one? Thanks

[@carlosalexandre7196]

I have CNC machine from this job

[@milekovac1695]

brao serbijaneeeeeeeee

[@OldMtnGeezer]

Nice. But that incessant, obnoxious, repetitious head-pounding "music" bed! Why is it deemed mandatory for every friggin' video out there to have a music bed? Adds nothing, detracts much.

[@Albertinhus]

E precisa de tudo isso só pra fazer isso???

[@bandk2000]

Nice tool but a totally clickbait title - hardly made from a steel screw is it!

[@bigbasil1908]

Well it's from chunks of metal and large bolts mainly lol

[@bricks2850]

@@bigbasil1908 and a large, fully equipped machine shop.

[@kutubuddinmolla9555]

Ak.ta.machin.paba.jabe.ko.to.dam

[@John-nl4lt]

I’m shore I have plenty of steel that size but no screws

[@markjohnson9402]

That's a bolt !

[@coptotermes]

Nice vid but terrible music…

[@larskjr6350]

6:26 - Oh my God!! Please be careful with your fingers! Could easily have used a set of pliers :-)

[@meshuggih700]

the guy hasn't even clamped his vice, drills and mills at all costs lol. I think he skipped mechanics class

[@robyoung1890]

lose the music, it ruins the video.

[@thechumpsbeendumped.7797]

That’s what the volume icon is for.

[@madzz180]

Sad old man 🤣

[@whiskeyrichards9973]

Why? Because it's not delicate harp backed by the tickling of ivory piano keys? If you don't like the music, or if it's distracting you from the video then may I suggest just turning the volume down as opposed to complaining? Just a thought.

[@yuvadanaledirne715]

Was the chicken you cut worth the frog you scared?

[@briangoldberg4439]

dude. your video is cool, i really enjoy the content, but your music is horrendous. it's super repetitive and maddening

[@alltypeofvideosenjoythis1269]

gjbbbbbbbb tollllllll

[@yurycz8933]

+

[@meshuggih700]

Je te donnes pas 2 semaines d'espérance de vie sur une fraiseuse si tu clames pas ton étau sur la table xD WTF sérieux ! Ca donne envie de montrer ta video en cours de prévention

[@user-vy4or3mz1x]

I can help you, just buy a round pliers and you will have more time in a place to invent unnecessary things.

[@user-pi8vt7ut3n]

... херотень какая-то безпонтовая 😜👎!!!

[@user-yt1in9zy9r]

А если ещё и стоимость этой хрени посчитать! Полдня работы...

[@MB-mh6xv]

seriously, why the music? horrible.

[@electronic7979]

Excellent tool