DIY mini bike pt 2 (bending the frame)

[@LNRRidez]

This video was awesome! I've been wanting one of the JD2 benders for awhile now. I'm actually building a mini bike trike but am using 1" square tubing for it! I can't wait to see how this turns out in the end. Keep the videos coming and I'll keep supporting and watching them!

[@MountainEagle77]

This is awesome! I’ve been looking for a mini bike build like this from scratch!

[@ironsandhammers359]

Tbanks for the video. Im looking to make cuatom bikes as a side hobby after my first build was so fun. Great work🙌🙏

[@TacoStand500]

Awesome start for a mini bike build for a custom mini bike frame! Very helpful!

[@speedrover]

Nice work!!! Any full suspension builds??!!

[@Kevin_747]

Nice work. Figuring out the rolled radius into the tight bends takes some work. I've had my JD2 bender since 1988, before they were called JD2. My 1" and 1.250 dies are the ones I've used the most. Has to be miserable working incognito with the full face helmet. New subscriber here.

[@bonnevillegarage]

great build guide. I always tell my students to have the seam line up when we use the tubing bender to help with bends and compound bends. Thank you

[@GratefulEd907]

You should make your students build these. I’d sign up for a class like that if it was available in my area.

[@bonnevillegarage]

@@GratefulEd907 we do. It an after school projects so that kids outside of my auto class can join in. Ever year we try to build 4 drift trikes 4 min bikes and 1 cyclekart

[@GratefulEd907]

@@bonnevillegarage that’s awesome what do you do with the builds?

[@bonnevillegarage]

@@GratefulEd907 scrap the metal each year, and reuse all the main parts.

[@FishingGuns]

Pretty cool seeing how to use a frame bender and tubing roller to make a homemade mini bike!

[@waynepearson7058]

Awesome pipe bender

[@noorbabelli]

Kindly question about the wheels how we can get it for international order? I couldn't find in internet 😪

[@RyanOfTheSouth]

This was a very informative video! Any chance you could make a video showing how to make a trike from like the big she trike Mini Bike Kartel builds? Or explain the changes you would need to this frame to build it into a trike like theirs?

[@dekaromcneil6333]

I would like to buy 1 of your frames how can we make that possible

[@kungfuclutch2788]

What's with the bike helmet on all the time ?

[@cybermavrik]

SAFETY FIRST ! Good work bruh !!

[@AshleyPalekotama]

Very well done mate great work keep it up

[@Josevargas-sb2ds]

What 1" CLR bending die are you using or prefer?

[@samsgarage1716]

Great job.I really want to get a pipe bender so I can make cool mini bikes like that.

[@mattburns9883]

I’m here for the ride

[@michaelosullivan4112]

Should try do some on trikes be looking awesome fun next adventure for trails ridings

[@Tampaboys]

Great job buddy how much would it cost me to get one of these frames off you bud

[@j8k3th3gr8]

I have a question- can you use a manual bender to bend these frames? I'm just asking bc I don't have the $ to invest into a hydraulic bender at the moment but I want to start doing some custom builds. I've been modifying existing minibikes but I want to take it to the next level. Appreciate your videos- let me know what you think if you have a chance.

[@mathewshackelford8037]

Solid video, new subscriber. Also, you can just use the WD-40 as a rust prevention. Two thumbs up man!

[@sarpergurbuz6318]

Can you please tell the wall thickness and diameter of the pipes? I would be really happy if you can.

[@pullstartpatriot]

do you happen to know neck tubing size and thickness? and bronze bushing size?

[@markgonzalez4070]

Awesome channel!! Great build and very helpful!! Do you sale the frames?

[@megoingfast]

No, but I will be getting more information online for area builders with the up and coming videos in the series.

[@trevinskiking2165]

@@megoingfast Captive Audience=Captive Market....it worked for Hughe Heffner of Playboy Fame.But do you have more of a vested interest down the track ..(no puny pun or offence intended ) Trev New Zealand 🙃

[@trevinskiking2165]

Who cencored or removed the "Like' within the last hour after a like notification came into MY inbox ? Now it's removed within the hour...we play FAIR cricket down here in NZ ,we don't get an advantage by the rulebook whatever.T NZ home of the world's fastest old Indian and the home of Indy Daytona Champ etc Scott Dickson !.

[@bigmacmillerlite8775]

What kind of tubing is this? It is kind of muffled in the video. Thanks!

[@edgarsanchez8537]

Did u know where can i found bushings fo the fork frame to hold to the bike frame

[@azrieldelacruz9379]

Do you have plans?

[@samkaplitz9036]

Pretty cool!

[@miketripletfab4098]

Did you use one of the dies that came with the harbor freight roller or did you get a 1” roller die for it.

[@israelalcantar8765]

At where can buy on of this

[@archi.001]

Good afternoon. I will be glad if you help me. I really want a bt200x mini bike, but there are none in my region. I'm ready to do it myself. tell me please, do you have a drawing of the frame, AutoCAD?

[@megoingfast]

Not the frame, the dimensions and angle measures are given in the video series. On the website, there are downloads on the bottom of the page in .dxf for cad use for the metal plates if CNC mill or plasma are available: megoingfast.com/custom-homemade-mini-bike-build-plans/

[@archi.001]

Thank you. Your experience will be useful to me

[@mrjoshua2791]

This dude is awesome. I think he's a character from one of the early seasons of south park.

[@megoingfast]

Kenny.

[@mrjoshua2791]

😆

[@trevinskiking2165]

@@mrjoshua2791 I go back to the ORIGINAL Minibikes of the 1960's & 70's & the hot engine to run was a McCulloch MC10 ? 10 HP 2 stroke with a Karting cast alloy header & I'm down under in New Zealand Cheers for leaving the comments switched on, you fella's in the states have now got it easy ! Trev

[@mrjoshua2791]

Ya i just recently pick up an old tote goat frame . I'm giving it a going over and having to tweak a few things putting in a predator . Back in the early 80s I got to ride my grandfather's on his farm so this one's near and dear to my heart. Cheers my friends.

[@steventwiddy3402]

Ok great video but why are you wearing riding gear while you’re building it ?

[@megoingfast]

Eye protection... but also to hide my face of which at the time I worked corporate world. You ever seen someone climb the corporate ladder while also being a goofy mini bike rider in their spare time? Free speech ain't free, sadly. Can't keep personal and business separate any more. Ditched the 25 year long career and the helmet in the latest videos. ;)

[@steventwiddy3402]

@@megoingfast I completely understand, lots of backstabbing sorry ass people in the corporate world , I was a territory manager for Nabisco for 18 years and they restructured and I lost my job but now I’m a sheet metal artisan on military aircraft and I love it to finish out my working career

[@mozzde4675]

Could I use conduit steel pipes

[@TheKenbotin]

Great job I hope you can notice my comment I hope u can weild a body frame for pocket bike that can fit the 43cc 47cc 49cc engine hope u can make a video doing pocket bike

[@fatbuddycat]

Nice work brother!

[@andyp6351]

Did you order special bearings for the pit bike front fork stem? Most of the small pit bike front forks that I have found, have a 22 mm steam, but with ~47mm od on the bearing cups

[@joshuagerlach6943]

I ride a 70s Cat Duster Chopper Almost every day the weather is good just beyond the edge of the paradise campfire. 212 governors removed, velocity stack , foam filter, jet , springs, 4 feet of 3/4 galvanized homemade header pipe, Honda thumb throttle, Suzuki foot pegs, I’ve had it for years She’s eaten many engines I used to go long distance rides with a hot rodded brigs & Stratton 8hp l head 14 tooth sprocket straight on its shaft no clutch I’m sure someone know how rad of a ride that would be. I’m 30 years old & just ordered a bt 200 x , predator 212 & a torque converter... I don’t even have a car These mini bikes are my daily drivers .

[@megoingfast]

Nice 😎😎 that BT is very versatile and a brute!

[@willylickit8694]

I had a cat duster chopper

[@Hollywood4Fun]

Tubing costs around here are too expensive to play around.

[@druface12345]

Make a frame for big tires next with a rear swing arm for extreme off-roading.

[@MrSlickPulla]

Man this is so awesome thanks bro

[@megoingfast]

No thank YOU! Took months to get it all together and it's still in filming! Compliment is appreciate! 👍😎

[@Pilotforlife555]

I’d love to get some actual drawings for the frame sides

[@anthonyreddy2834]

I personally use brake or carb cleaner because wd40 leaves an oily residue.

[@michelevitarelli]

Great video. Thanks for sharing.

[@skylark4901]

What brand name tubing roller do you have there? Thanks, Merry Christmas!

[@megoingfast]

JD2

[@goldyfourtyfourty]

Hi, do u mind to share your frame dimension?

[@themechanicman3865]

did you add that hydraulic cylinder to it or did it come with that cuz I've looked at a few of these and they don't come with that hydraulic cylinder that looks like a high Harbor Freight cylinder

[@megoingfast]

"S.w.a.g. off road" kit to add it.

[@JolicoeurAbear]

sorry for another question, why did you change to the second bender after the first roll? will the harbor freight roller not do every bend?

[@megoingfast]

There is a roller and a bender. Roller will not be a specific degree radius, a bender will be. The rollwer cannot do the 130+ degree bends needed.

[@williamaddison5923]

What material do you use for the steering stem?

[@DavesCoolCustomBikes]

What die are you using to get your curves I’ve got a bunch of them but I can never seem to get my curves that tight maybe I need a new die

[@megoingfast]

1"*3" for the jd2 bender. Model 32 Die Set - 1" Round Tube (1" OD) - 3" CLR - 180DEG: www.jd2.com/model-32-die-set-1-round-tube-1-od

[@thebrokeway9838]

homeboy got that gangsta lean..when you know wtf you talkin about!!

[@jarpen3]

Open production super 73 make good bissnes, 👍

[@jex8046]

Deserves way more views. Hope you can make seperate videos about your tools and or mods

[@megoingfast]

part 3-5 starts covering more details - filming part 3 the past couple days but this is a very large project with many parts for many builds

[@standeyoe7468]

great video. what size and wall thickness of DOM tubing are you using ? Are you buying that on line or close to home ? keep those videos coming.

[@megoingfast]

16:35 and online from a place close to home

[@JolicoeurAbear]

I can't find 90 inch, would it work to weld 2 or three lengths end to end?

[@megoingfast]

It won't bend true, and without a sleeve in the weld won't fit in the bender unless you grind it down and sacrifice weld strength and support. So, overall, not the best.

[@JolicoeurAbear]

@@megoingfast thanks, I will keep looking for a longer one.

[@briantruck2284]

wish I had a pipe bender

[@jg1746]

I have a v-twin and opposed twin Briggs and Stratton engine, do you think if I followed your build to the T, these engines will fit?

[@megoingfast]

Don't know. Don't have the engine to check. The 440cc 18 HP that's on there will be putting out over 21-22 when I'm done with only minor performance mods and have room enough for the stock gas tank. Only cost $350 with tax.

[@trevinskiking2165]

@@megoingfast Don't Support China ,you may as well used a used good condition Trailbike engine if your chasing that sort that sort of horsepower, you can get low cost Honda dual range CT90cc 4 Strokes for a song with a lighting coil & reliability if your on a budget & upto a 250cc if you want to scare youselves

[@trevinskiking2165]

Damn autocomplete: minimum of 5 speeds & similar weight as the engines your playing with or prefer, not everyone lives in the states with it's cheap prices.No offence.Then builders could tailor the power output to suit their riding abilities.Just an alternative powerplant thought with non Chinese reliability buy local & keep someone in your own Country Fed.Cheers, Trev New Zealand 🙃🤗

[@nicholasventura4107]

Do you sell frame

[@rickyislas1390]

Do you make frames for customers. Can i order one.

[@megoingfast]

I never will for public sale. Unrealistic expectations on cost, liability, etc. I build stuff for a few very special high roller locals.

[@Turbski1]

Can you make me a micro fame?

[@megoingfast]

I have a build of one. Never did launch the video, though. They are pretty easy to build.

[@Turbski1]

@@megoingfast i ended up building up a rcf micro mini

[@megoingfast]

@@Turbski1 Those are nice! Evans got some great builds for sure!

[@LNRRidez]

Do you have any links to those forks?

[@megoingfast]

The are I believe 4-5 different sets I've got laying around. 2 are Amazon. 1 was studz. 1 was off a RB100 after I switched forks, and one was home made.

[@GratefulEd907]

Looks like there’s a demand for these I like the looks you should take some preorders and hire some help if ya need to just quit your day job and build us some mini bike frames

[@Bikelifechalie]

prices?

[@megoingfast]

ALL THE MONIES! (I'm setting up a different plasma cutter, still not able to do production runs yet but hoping to go somewhere with this soon. Can contact a local build to see if they'll make you one. Plans are out there!

[@bacon2589]

Lemme buy one

[@megoingfast]

If you find someone who can build it in the area. I'm sure someone can build you one but I'm not setup for mass production. Barely have enough room to move around in the garage.

[@chrisskatehii5121]

takin off oil with oil. got it

[@stevie9361]

Make one out of aluminum an send to me an ill tig weld it. I'll charge a frame for me

[@aftermathwhite4955]

Why in the hell do you have on a helmet LOL

[@RAWRMotorsports]

😱💥🔥👍✌🤘😎

[@SpACeCruizeR2o3]

HoW muCh i JUst DoNt hAve thE tooLs foR thiS bUt i Def WAnt A frAme A.S.A.Pp

[@megoingfast]

DiD yOu JUst caLl mE a SAp?!

[@SpACeCruizeR2o3]

@@megoingfast lol

[@SpACeCruizeR2o3]

@@megoingfast a.s.a.p as soon as possible lol who calls people sap anymore lol