DIY Miniature Clear Drink Bottles | Dollhouse Food, Resin 3D Prints

  Рет қаралды 26,866

Smol World Workshop

Smol World Workshop

Күн бұрын

Пікірлер: 56
@heathertdaniels
@heathertdaniels Жыл бұрын
Oh my God, stop! I can’t! This is just too freaking adorable!
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!!!! :)
@cherylwatts2739
@cherylwatts2739 Жыл бұрын
So cool!!! I really enjoyed watching you make these tiny bottles.
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you so much!!!
@presto709
@presto709 Жыл бұрын
Really nice work.
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!
@kristophermelin7160
@kristophermelin7160 Жыл бұрын
They look great - quick couple of questions. Why do you not do a final cure for the resin? And are there any issues with paint sticking long term, or with the bottles remaining sticky? Thanks.
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!! In the past, direct post curing under a uv lamp has yellowed my clear resin before. Some of the bottles I have done are roughly 7 months old and they’re holding up great! The clear coat should hold up fine as long as the bottles aren’t sticky before hand. Just make sure to wash all the excess resin off with alcohol, and let it dry before clear coating. Depending on the clear you use, you may want to wait overnight before handling. Hope this helps!!
@michaelomalley9992
@michaelomalley9992 Жыл бұрын
@@smolworldworkshop The yellowing is from "over curing' or basically continued to UV light. Your spraying with the UV spray is a great solution!
@smolworldworkshop
@smolworldworkshop Жыл бұрын
@@michaelomalley9992 thank you!
@silenttraveler7192
@silenttraveler7192 Жыл бұрын
Total Awesomeness 😮
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!!!
@toxicunknown9219
@toxicunknown9219 4 ай бұрын
Just spent a few minutes looking around your channel and holy shit man you have a real talent
@smolworldworkshop
@smolworldworkshop 4 ай бұрын
Thank you very much!! I appreciate you taking the time to check out my channel!
@gottliebheinrich8413
@gottliebheinrich8413 Жыл бұрын
for the daughters little shop and doll playing the bottles did i made from acrylic glass rod and a lot of sanding and polish. but nowadays with this techniq and the printed labels ... wow, such a small size and perfection! plus with 3d printing one could make special things like the big bavarian beer glasses or a light blue water keg on such a stand.
@smolworldworkshop
@smolworldworkshop Жыл бұрын
That’s awesome! And thank you! Yes the possibilities with 3D printing are almost endless! Thanks for watching :)
@alliebrewer104
@alliebrewer104 7 ай бұрын
Thank you for sharing your ideas and methods of doing them. I also appreciate you giving the name of the programs.
@smolworldworkshop
@smolworldworkshop 7 ай бұрын
Thank you for watching and for your kind words!
@craiglister7110
@craiglister7110 Жыл бұрын
Starting to watch past videos now 😊 awesome and so good to watch 👍🏻
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you for checking out the older content :) appreciate you and your support!
@maxjousserand8822
@maxjousserand8822 Жыл бұрын
Formidable, super boulot !! Est-ce que vous partager vos fichiers 3D ? Et ou avez vous trouvez trouver toutes ces étiquettes ? Merci. Max.
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you! You can download my 3D files and a PDF of the labels if you join my Patreon (Gold or Platinum) www.patreon.com/SmolWorldWorkshop You can also make your own labels by finding logos and images on the internet, and scaling them to the right size! Hope this helps!
@IronBridge1781
@IronBridge1781 Жыл бұрын
Great results! What modelling software are you using here?
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you! I use the free version of Fusion 360 to model the bottles, and Chitubox to slice the files for printing. Honestly the bottles are super simple to model, so I’m sure any modeling software should work. Thanks for watching :)
@dadtype2339
@dadtype2339 Ай бұрын
Just found you, and subscribed ❤
@Schex
@Schex Жыл бұрын
Very cool! Looking forward to more videos!
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!!
@vivianphillips768
@vivianphillips768 Жыл бұрын
GREAT VID I’m gonna go make smol fantas now!!
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you so much! And that’s awesome!!
@asgarthokan7274
@asgarthokan7274 Жыл бұрын
Tooo fantastic . Thank you
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thanks for watching!!!
@CyberstormDJTeam
@CyberstormDJTeam 13 күн бұрын
Awesome stuff, your diorama channel is by far the best I've seen so far! One question: What CAD/3D modeling software do you use in this video?
@TheYongary
@TheYongary 4 ай бұрын
Do you use a laser or inkjet printer for these?
@mariopagano8630
@mariopagano8630 10 ай бұрын
looking at the water bottles there real nice are thay for sale would like to buy a bunch from you in 1/25 scale thanks
@KrastyoKrastev
@KrastyoKrastev Жыл бұрын
Great video. Subscribed :) What model is your airbrush?
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you! My airbrush is a Procon Boy PS-268AR 0.4 single action by GSI Creos. Hope this helps!
@marccxxshammer6643
@marccxxshammer6643 Жыл бұрын
👍🏼
@eTraxx
@eTraxx Жыл бұрын
Dang you are good
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Thank you!!
@grantforsythe1280
@grantforsythe1280 Жыл бұрын
What modeling software do you use?
@smolworldworkshop
@smolworldworkshop Жыл бұрын
I use the free version of fusion 360!
@BRAD-ROTT
@BRAD-ROTT 10 ай бұрын
WOUHOUUUUUUU!!! My 👍 make you 1K on this video!!!!! 💪😜
@brianfoley8782
@brianfoley8782 10 күн бұрын
Is good
@arbat7553
@arbat7553 3 ай бұрын
💪
@AM-am.pm.d.m.y.
@AM-am.pm.d.m.y. Жыл бұрын
Cool!
@ShabnamGulnaj-vg2qf
@ShabnamGulnaj-vg2qf 8 ай бұрын
Wow
@HauntedCorpseGaming
@HauntedCorpseGaming Жыл бұрын
5:21 If only they were edible.... (Soda Pop Gummies)
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Haha yeah if only! Thanks for watching :)
@adammackenzie
@adammackenzie Жыл бұрын
Our local print shop won't print anything copywritten..
@smolworldworkshop
@smolworldworkshop Жыл бұрын
That’s too bad! Not sure if you have a FedEx near you, I printed mine at their self serve printer just fine!
@sabakamahusky594
@sabakamahusky594 Жыл бұрын
You sell miniatures?
@smolworldworkshop
@smolworldworkshop Жыл бұрын
Unfortunately not at the moment. Thanks for watching :)
@xxelaxela333
@xxelaxela333 Жыл бұрын
Stop touching uncured resin with your bare hands!!!!!!
@berthaday3473
@berthaday3473 Жыл бұрын
Well lemme just run out & purchase a 3-D printer first. (Or just buy bottles on line $1)
@MrGTAmodsgerman
@MrGTAmodsgerman 4 ай бұрын
Don't forget to prepare for all the safety setup when you getting such printer. Those resins are toxic and nothing to joke with in a kitchen or something. It needs an proper ventilated room with respirators and such. Inform before buying. Otherwise there are printing services.
@BRAD-ROTT
@BRAD-ROTT 10 ай бұрын
SUPER DISAPPOINTED!!! When I saw the miniature, I thought it would be an idea to make miniature bottles from nothing, starting from scratch... But I still like you and love your videos my friend! @^:^@
EASY dollhouse miniature Jars made from everyday items - No Clay or Resin!
10:57
DIY Clear Silicone Mold for UV Resin Miniature Bottles
17:45
Resin Belle
Рет қаралды 7 М.
How to Make REALISTIC Miniature Metal Trash Cans & Garbage Bags for Dioramas
6:38
Turn LED'S into REALISTIC FIRE for your Diorama!😮🔥
9:31
Nat 1 videos
Рет қаралды 247 М.
How much do 3D Printed Miniatures Cost?
19:39
Hellstorm Wargaming
Рет қаралды 665 М.
I made a LORD OF THE RINGS resin diorama that Gollum would LOVE
21:08
Lars Stranden
Рет қаралды 494 М.
EASY miniature books, magazines & general clutter • New Techniques!
15:31
Tiny Train, Big Impact: Building a Coffee Table with a Twist!
28:48
Full Stack Woodworking
Рет қаралды 631 М.
Painting a 3D Print shaped as Rogue
17:56
Groundeffected
Рет қаралды 285 М.