DIY Mobile Drill Press Stand with Drawers

[@DIYBuilt]

Another great tutorial Dan, drill press stand turned out awesome!

[@inspiringbuilds]

Thank you sir! I picked up a drill press table for it so now on to the upgrades. 👍 What do you have on deck next?

[@DIYBuilt]

@@inspiringbuilds just finishing off a tool cubby build, my idea of storing tools in totes was terrible so I’m re-organizing the shop again,lol. 3rd and final hopefully. Should have a video out either today or tomorrow.

[@inspiringbuilds]

@@DIYBuilt Looking forward to it. I always say we can’t be afraid of failure in order for something to succeed. Sometimes it just takes multiple tries and that’s ok! I personally try to learn something new everyday. 👍

[@DIYBuilt]

@@inspiringbuilds I agree, failure only leads to success, learn something everyday

[@gavinmorrison7549]

That is slick! Nice build Dan 👍 bonus feature is its mobile. Thanks!

[@inspiringbuilds]

Thank you, yes I love making as many tools mobile as possible! I’ll be working on upgrades for any drill press next. 👍

[@pollypowell3907]

Gonna build a drill press table…please. 😊 Love your content. Thank you.

[@inspiringbuilds]

Thank you Polly, and great idea! I will be working on a dress press table for this drill press that will fit almost any drill press next. Make sure the bell notification is turned on so you don’t miss it! 👍

[@FixItFrench]

Those drawers look fantastic inside the stand! I agree that having more tools on wheels is a positive for small shops. All of my benchtop tools are on wheels except for my jointer, but I’m working on that. I’ll have to give the sports drink a try

[@inspiringbuilds]

Thank you brother! I removed the legs and switched the hardware to black and it was much easier than building drawers. The drink is not only good for working out, but staying hydrated and healthy with no sugar. 👍

[@FixItFrench]

@@inspiringbuilds my wife is a type one diabetic. So we love to get stuff like that

[@inspiringbuilds]

@@FixItFrench Sorry to hear that and fully understand. I put the link in my description. I haven’t tried all the flavors yet, but they have a variety pack. What’s next on deck for you?

[@FixItFrench]

@@inspiringbuilds not sure what video I’m going to post, but I have six of them recorded. I just need to edit them. we are currently remodeling our basement, so that’s where all my time is going right now. lol

[@OverOut]

I am always fascinated to see what new tool you will use next. Never even knew a Kreg Jig existed until now. Dan, thanks for always introducing us to these helpful tools and showing us how to use them. Awesome!!👍🏼

[@inspiringbuilds]

You bet! A kreg jig is super handy, this one has been my favorite model. 👍

[@SpiritedWrenchers]

Looks similar to one I built for my son's mini fridge and microwave in college. Now, it holds the beer fridge in the shop. Lol. Love simple and effective designs like these. Thanks for sharing.

[@inspiringbuilds]

Great minds think alike, thanks watching and Happy Easter to your family!

[@nataliemorrison7173]

Way more convenient than having a different unit for tools that go with the drill press. This is a great idea and convenient!

[@inspiringbuilds]

Thank you, I appreciate it! I’ll be working on upgrades for any drill press next. 👍

[@inspiringbuilds]

Below are the tools and supplies used to build your mobile drill press stand: Kreg Jig: amzn.to/3x2E8gO Magnetic Wrist Band: amzn.to/3V0h6Pk Zero Sugar Protein Water: amzn.to/49c9PRT Drill Press: amzn.to/43bTs6O Digital Angle Gauge: amzn.to/3NrINPo Caster Wheels: amzn.to/3x5FgQR Drill: amzn.to/3P8BtWi Orbital Sander: amzn.to/3x5FjMx Feather Board: amzn.to/3PvG4Vn Push Stick: amzn.to/3IPlBXQ Quick Grip Clamps: amzn.to/407w1bI Speed Square: amzn.to/44gg8mb Glue: amzn.to/3IO7uSt Wood filler: amzn.to/43xKC3d Shellac: amzn.to/3Vr3nU0 Painters Tape: amzn.to/3nESFHh Tape Measure: amzn.to/3IkGv04 *DISCLAIMER: The above links are affiliate links. This costs you absolutely nothing, but pays me a small commission and helps me continue to create this FREE content.

[@nataliemorrison7173]

Thanks for the links and the nice build! Great idea!

[@nataliemorrisonhomes]

Thanks for the links, helpful!

[@o.g.bwoodwork]

Love this drill press stand. Very strong and sturdy

[@inspiringbuilds]

Thank you! I’ll be adding a table to it in my next video. Having it mobile is probably my favorite feature. 👍

[@nataliemorrisonhomes]

🤩 SWEET! Love the concept! Great job! Thanks for the well explained DIY!

[@inspiringbuilds]

Thank you, I appreciate it! I’ll be working on upgrades for any drill press next. 👍

[@dbdouglas]

I didn't need a mobile one, so I built a wooden stand attached to the wall, with diagonal lower support, meeting the wall above the floor, to keep the floor clear.

[@inspiringbuilds]

That’s a great idea as I’m a big fan of keeping the clear floor when possible and room allows. Thanks for watching! I will be working on other drill press related videos for improvement such as a drill press table for any drill press along with other upgrades. Stay tuned if that interests you. 👍

[@timlist4173]

I like the k4 by kreg.

[@inspiringbuilds]

@@timlist4173 Thanks for watching. The K4 is nice as well. I encourage everyone to pick up a Kreg jig, even if it’s the simple R3 that I have used for years as well. They’re super cheap and start around $40 and pays for itself in a single job.

[@jerryklooster438]

Nice look. Do you think the shear strength is sufficient for a tool as heavy as a drill press?

[@inspiringbuilds]

@@jerryklooster438 Thank you and I appreciate the comment. Yes, I do believe so and have been putting the drill press to work for the past 8 months with no issues. I also put together a drill press playlist with one of the videos showing multiple ways to upgrade your drill press. kzbin.info/aero/PLxLuwzp7QVPTuENVs7j1RrOXCSHSWSyBq

[@jerryklooster438]

@@inspiringbuilds Thank you so much. I will check them out!

[@edwardebel1847]

Try wrist band on the hand that is holding the driver. With it on the left hand, you have to put down the drill to place the screws. On the right wrist, you keep the drill in hand and select the screws with the left hand...at least that's what works for me. Cheers

[@inspiringbuilds]

Good tip, thanks for watching!

[@dougkielkopf7572]

Massca jig in my humble opinion is better.

[@inspiringbuilds]

@@dougkielkopf7572 Thanks for watching and the comment. A pocket hole jig is certainly handy for every DIY’er.

[@nathangonzlaez2]

overall height anyone ?

[@inspiringbuilds]

@@nathangonzlaez2 Thanks for watching and good question. The total height is approximately 35.5”. The framing is 30.5” and wheels are 5”. I hope this helps! I also put together a drill press playlist with one of the videos showing multiple ways to upgrade your drill press. kzbin.info/aero/PLxLuwzp7QVPTuENVs7j1RrOXCSHSWSyBq