Find more vehicle LED Light Systems here kzbin.info/aero/PL4dsTE_604gsyR__ym22681pabDq9zSTR
@thepratibimb2449 Жыл бұрын
Pure technology and programming
@HAZITECH Жыл бұрын
Thank you so much.
@lalosalamanca-d2y7 ай бұрын
its very helpful content. thank you so much
@HAZITECH7 ай бұрын
You are welcome.
@taufiqrizal38083 жыл бұрын
This deserve millions subscribers ! 👍👍👍👍👍👍👍😍😍😍
@HAZITECH3 жыл бұрын
Wow, thank you so much. Please share my videos to grow our community. Thanks 🙏🏻.
@imdbtruth2 жыл бұрын
Thank you so much for sharing! Please do more similar projects with LEDs for vehicles. I've seen some speak of a delay before the signal outputs to the light. Do you think that a relay might help the situation, or possibly it could make it worse? It's just that you're taking the turn signal wires and brake wire and increasing their loads, and I know in the car audio world when we increase the load on the accessory wire that it's good practice to run it through a relay, so I'm thinking maybe the same could be true for the signal wires for lighting.
@HAZITECH2 жыл бұрын
Hey. Thank you so much. Please visit my playlists to see more related videos. And I’ll make more for sure. BTW, I think the delay is due to Arduino processing speed or so. Not related to wiring.
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
@KeithRobertson1Ай бұрын
This is awesome, thank you - going to check out your other videos. Question - you'd need the 12v power from the car to be constant, not based on ignition - since the lights need to come on regardless of the car's ignition status - so wouldn't powering this Arduino when the car is off slowly drain the battery?
@HAZITECHАй бұрын
Hey, thank you so much. When the LEDs are not active Arduino Nano drains around 70mA at 5V max. So when it translated into 12V, it is around 30mA. So if the car battery is 40Ah 12V battery, it takes 1333 hours to fully deplete. It is 55 days. So I think this is negligible. And I have made a product which powers up the unit with the car light signal itself. So no need for a constant 12V supply. will release the videos on that soon.
@всезнайка-ж6р2 жыл бұрын
мое авто сломалось, стоп сигнал и поворотники перестали работать, ваше искусство спасет жизни, спасибо
@HAZITECH2 жыл бұрын
Вау, невероятно. большое спасибо. но будьте осторожны с законом вашего графства.
@crazy.chathubro4 жыл бұрын
මේකට මම පොඩි යොජනවක් කරන්නද??? Day time running light එකක් විදියට ඕක power එක තියෙනව හැම වෙලෙම light on වෙලා තිබ්බොත් බල්බ් වල life time එක ඉවර වෙයිනෙ... ඒක නිසා ඕක power ඔන් උනාම මුකුත් light පත්තු නොවී තියෙන්නත්.. signal සහ break වලට විතරක් දැල් වෙන්න විතරක් හදන්න බැරිද... රෑට light ඔන් කලාම parking line එකෙන් wire එකක් අරන් රෑට ලයිට් දැම්මම විතරක් dim red colour light එක දැල්වෙන්න හදන්න බැරිද... මේක අදහසක් විතරයි...
@HAZITECH4 жыл бұрын
Godak honda adahasak. Thanks a lot mata adahas denawata 🙏🏻. Aniwaryayenma karannam. E version eka langadima dennam. Jaya wewa brother.
@harsharupasinghe28084 жыл бұрын
හොද අදහසක්
@HAZITECH4 жыл бұрын
Aniwaryayenma. Oyagollonge adahas mata kiyana eka godak watinawa. Thanks a lot. Api ekathu wela honda dewal issrahata karamu 🤜🏻
Awesome project. But can i do witn one esp8266? Thank you so much
@HAZITECH Жыл бұрын
Thanks a lot. More videos are in the playlists. Yes you can do that.
@harsharupasinghe28084 жыл бұрын
මෙක තමයි මම තියපු එක නියමයි bro,
@HAZITECH4 жыл бұрын
Thanks bro
@ShawnA5603 жыл бұрын
Have you installed it on a car? does the break with turn signal work the same way when it is connected to the actual turn signal of a car?
@HAZITECH3 жыл бұрын
Yes. There is a slight delay but it works as shown in the video. Make sure you adjust the turn signal timing as shown in the video.
@matejmatasovsky1548 Жыл бұрын
Hello. I need help with your project. I installed everything as you have in the video in the house on the source it works fine. But as soon as I plug it in the car it starts going crazy. What could be wrong? I would also send a video of what it only works here, it can't be done on youtube. Thank you for your response.
@HAZITECH Жыл бұрын
It is 100% due to the power supply. Try using a high quality mobile phone USB charger and get the 5V out from it for the system.
@EmreOZTURK_ANT1V1RUS78 Жыл бұрын
Hi. follow the steps in your video. I made connections to arduino nanoma. When I power up it turns white. Then, when I give +12 v input, unfortunately the inputs of the arduino nano no longer work. I think it burned.
@HAZITECH Жыл бұрын
If you did the wiring exactly as I mentioned, it should work just fine. More than 500 people already made this.
@chandanagamage99514 жыл бұрын
Good and very useful idea grate video tx bro👍👍👍❤❤❤
@HAZITECH4 жыл бұрын
Thanks a lot bro
@hearttouching4142 жыл бұрын
💛💛💛 next projects test ❤
@HAZITECH2 жыл бұрын
👍🏻
@BDF-f4r3 жыл бұрын
Hi nice work, how can i separate the indictor lights and the reverse lights onto different strips please
@HAZITECH3 жыл бұрын
Hey, I’m working on it at the moment. I’ll post videos soon on that. Stay tuned.
@BDF-f4r3 жыл бұрын
@@HAZITECH Awesome, Thank you
@HAZITECH3 жыл бұрын
You are welcome
@Adrian58 Жыл бұрын
hello, will the on/off switches start working? How would I connect them?
@HAZITECH Жыл бұрын
You can add switches to any of the signal wires. So that you on/off the 12v signals.
@Adrian58 Жыл бұрын
@@HAZITECH Thanks
@elijahwilson8342 Жыл бұрын
Is the LED strip you used 12v? I have 12v led, how can I power 12v led when Arduino is 5v max?
@HAZITECH Жыл бұрын
If you take a look at the wiring diagram in the video, you can see I have used a voltage regulator.
@elijahwilson8342 Жыл бұрын
@HAZI TECH I see your diagram, but you are using 5v led correct? How can I use 12v led?
@volkswagenvr63.6lccnz33 жыл бұрын
Wow! Amazing Hi I’m looking at the code, how do I change the sequential indicators to a solid blinker please?
@HAZITECH3 жыл бұрын
Hey thanks. Go to blinker function sections down below in the code. Then turn on the required section in orange, put a delay, turn off the section and again put a delay.
@jackofroz2 жыл бұрын
Very nice tutorial. Could you show us how to split the LED strips to 4 parts? The stop lamps are split because 2 of them stuck on the trunk
@HAZITECH2 жыл бұрын
This may help you DIY Audi Q7 Style Modern LED Car/Truck Tail Light With Dynamic Indicators | Arduino + WS2812B LED kzbin.info/www/bejne/kKOZaHeIbNeHgtE
@stephenschiefer3156 Жыл бұрын
is it possible to program the reverse light so that it wont be interrupted by the brake input?
@HAZITECH Жыл бұрын
Yes can be done. I’ll keep it in my mind for the next version.
@stephenschiefer3156 Жыл бұрын
@@HAZITECH Is it also possible to make the blinkerspeed faster? I am at 0 for blinker speed and it is not fast enough. Also, is it possible to make the delay between inputs faster?
@shivakarthik126025 күн бұрын
Nice
@abelbreytenbach3023 жыл бұрын
nice video thanks. Do i fill the commands just like you did exept for the amount of LEDs
@HAZITECH3 жыл бұрын
Change the code only if you want to change the number of LEDs. Otherwise upload the code as it is.
@MuthuRamalingamDriverАй бұрын
Sir 2pcs vanum order yappadi pannanum
@HAZITECHАй бұрын
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
@autolightsupport12723 жыл бұрын
This is nice project,👍👍 how if I want drive only R or L..? one led strip for R or L, so the led can start from the one side, not from center
@HAZITECH3 жыл бұрын
I'll do that as my next project next week.
@autolightsupport12723 жыл бұрын
@@HAZITECH wow... okay brother, thank a lot 😍👍
@HAZITECH3 жыл бұрын
You are welcome
@HAZITECH3 жыл бұрын
But in return I want something from you 😉. Please share and promote my KZbin channel. That’s it 🤜🏻.
@autolightsupport12723 жыл бұрын
@@HAZITECH yep already 😉
@smokehunter18813 жыл бұрын
hi you can make this to brake light blinker? and ad 1 sinal to rainbow demostrantion and anoder to police lih]ghts????
@HAZITECH3 жыл бұрын
I’ll combine all of my viewers ideas and release the next version of this soon. Stay tuned.
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
@thomasalmeida34712 жыл бұрын
I use the running 12v to power the whole system? But it wouldnt brake when the running is off?
@HAZITECH2 жыл бұрын
Sorry. I'm not clear what you are saying.
@mathewwest2 жыл бұрын
Hi i love this setup and i have followed what you have done. I am wondering if you could change a bit of the coding to allow for the reverse lights to work along with the dim and brake. So the reverse lights would only be the same amount of LED'S as the indicators. Outside 15 LED'S reverse. middle LED'S dim and brake, Outside LED'S other end reverse. I hope that makes sense
@HAZITECH2 жыл бұрын
Hey. Yeah the request is very clear. However it requires bit of code editing and will try to include it in the next revision. In the meantime please take a look at my playlists. You will find more options there.
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
@ABDULBASIT-cw3fl2 жыл бұрын
i am sorry Master,i want to ask, is it possible if you use arduino nano, if you can please send the schematic
@HAZITECH2 жыл бұрын
I have used Arduino nano here. The schematic is in the video.
@EmreOZTURK_ANT1V1RUS78 Жыл бұрын
Hello. i've made the connections, but it's not working. I made a 12 to 5 v converter. I connected it to a 5 volt arduino, connected the gnd pin with resistors. then I connected the 12 v+ pole to the 22k resistor, but only the white light is on. soory google translate. and I made num leds 30. I made BlinkerLEDs 10.
@HAZITECH Жыл бұрын
That is very strange. If you did the wiring correct and upload the code as I mentioned, it should work. There are hundreds of members tried this and worked.
@laulove4736 Жыл бұрын
Hello man how i conect ws2813 led to arduino uno ? Pls help me i have 60 cm ws2813 for my car project 😔
@HAZITECH Жыл бұрын
Sorry it doesn’t work with this.
@toonlk18213 жыл бұрын
Bus වල pixel shel programming karana හැටියි ewa හයි කරන හැටි ගැන video එකක් කරන්නකෝ
The Hazard lights don't work when reverse light is on.. You can't backup with hazards on
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests. And you can buy programmed controllers from us - 📧 info.hazitech@gmail.com
@drog95 Жыл бұрын
FastLED.h: No such file or derectory Got this error, any ideas?
@HAZITECH Жыл бұрын
Install the FastLED library first
@seyvanbuokani1675 Жыл бұрын
wow very nice tnx. im not finde arduino code ??? where is it ?
@HAZITECH Жыл бұрын
It is linked in the video description. Google drive link.
@cjnav32892 жыл бұрын
I'm running this project the arduino is turning on but not the leds I'm using the ws2812b
@HAZITECH2 жыл бұрын
Please double check the wiring and the LED data in direction.
@cjnav32892 жыл бұрын
@@HAZITECH I have, 3 questions I only have 1 led turning on what does it mean and do have to connect all connections to work and do they go on negative line or positive line are do I have to make 2 wires for turn signal and break
@HAZITECH2 жыл бұрын
You have to connect all the resistors based on the wiring diagram to make it work. For bench testing, just give +12V to signal wires one after the other and see what happens.
@cjnav32892 жыл бұрын
@@HAZITECH I'll up date u ty
@HAZITECH2 жыл бұрын
Cool 👍🏻
@MuthuRamalingamDriverАй бұрын
Sir 2 pcs vanum yappadi order pannanum 4:06
@HAZITECHАй бұрын
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
@Helloworld5193 жыл бұрын
Thank you brother.
@HAZITECH3 жыл бұрын
You are welcome brother
@OvernightCrew Жыл бұрын
Hi, is it possible to order this from you?
@HAZITECH Жыл бұрын
Yes of course. Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
@hosr45 ай бұрын
Sir led only power on off animation how work
@HAZITECH5 ай бұрын
Please take a look at my next video on this.
@hasankaperera7714 жыл бұрын
සුපිරි bro ❤️❤️❤️❤️❤️❤️❤️❤️
@HAZITECH4 жыл бұрын
Thanks bro
@matejmatasovsky1548 Жыл бұрын
Well try to replace. Are you also on Facebook so I can install a video of what it does?
@HAZITECH Жыл бұрын
I’ll take a look. Did you try to upgrade the power supply?
@matejmatasovsky1548 Жыл бұрын
I haven't had time to try to replace yet. I sent a video of what it does to me on Facebook.
@HAZITECH Жыл бұрын
Got it 👍🏻
@BDF-f4r3 жыл бұрын
Hi help please, i have connected this to my car but it is 14v when the engine is on - what should i do its causing problem with the LEDS everything was ok when i connected it using 12v but it changed once i connected it to the car thank you in advance
@HAZITECH3 жыл бұрын
For power in you should use a very good 5V power regulator. For the signal lines, you can increase the 22K resistors to ~25K.
@BDF-f4r3 жыл бұрын
@@HAZITECH thank you i'll try this and will update you
@HAZITECH3 жыл бұрын
Perfect. Good luck
@cjnav32892 жыл бұрын
Can you do this without the buck converter
@HAZITECH2 жыл бұрын
You have to have a 12V to 5V voltage converter which can output around 2-3A
@smeek1113 жыл бұрын
Why is there such a delay when you end any of the inputs? Like when you release the brake input the brake lights stay on for like 3 or 4 seconds.
@HAZITECH3 жыл бұрын
There is a slight 1-2sec delay when the brake is hit while the signal indicators are running. Other than that there is 0 delay. In the video most of the time I hold the brake to demonstrate.
@smeek1113 жыл бұрын
@@HAZITECH Thanks for your reply. I changed nothing in your code except for number of LED's. No matter what input I end there is a 4 second delay before whatever input you trigger turns off. So upon power up the tail light portion is on. If I input for the brake light it turns on immediately. When I end the brake input the brake light doesn't turn off for 4 seconds. The same thing happens if I input for the reverse light and either of the turn signals.
@HAZITECH3 жыл бұрын
Wow that’s very strange. Try giving 5V to the 10 K and 22K resistor joint to trigger the lights for each channel to see the effect is same. You can get the 5V out from the Arduino board.
@smeek1113 жыл бұрын
@@HAZITECH I am using the 5v out from the arduino board. I'm not using the voltage divider since I am bench testing.
@HAZITECH3 жыл бұрын
But you should use 10K resistor. Ooh that maybe the reason. Forget 22K but connect 10K as in the diagram. And then give 5V to 10K (arduino data in connection side). It should work fine. Let me know after testing.
@igsgarage2 жыл бұрын
It says 12v to 5v. But how many amp?
@HAZITECH2 жыл бұрын
It depends on the number of LEDs you use. In general, 1.5-2A is enough for 100 LEDs.
@igsgarage2 жыл бұрын
@@HAZITECH my fear is that my step down from 12vto5v says 3amp. Will that burn my LEDs if I only have 30 or 40?
@HAZITECH2 жыл бұрын
Not at all. As long as you give 5V, higher amp rating won’t hurt. It is actually better. LEDs will draw only the required current from the power source.
@igsgarage2 жыл бұрын
@@HAZITECH ok thank you. Been trying to figure this out lol
@HAZITECH2 жыл бұрын
Cool. Good luck
@agusnamialus3 жыл бұрын
Sir, how to make a knight rider lamp with arduino. Thanks.
@HAZITECH3 жыл бұрын
Here you go. You can find many knight rider projects here. kzbin.info/aero/PL4dsTE_604gvwvnnnKTFg-bDIQMbbrZLh
@agusnamialus3 жыл бұрын
@@HAZITECH awesome... U save my day sir, i will share to my friends your channel in my whatsapp 🙏🇮🇩
@HAZITECH3 жыл бұрын
Wow super thanks. Really appreciate it 🙏🏻
@OmerKhan-x1l Жыл бұрын
I can not find the software ?
@OmerKhan-x1l Жыл бұрын
😢
@pingsyed2 жыл бұрын
I want like this Light for Skoda Octavia old model 1.9 tdi.
@HAZITECH2 жыл бұрын
Any links?
@pingsyed2 жыл бұрын
@@HAZITECH No
@HAZITECH2 жыл бұрын
Ok. Try it out. It will work great on the model you mentioned.
@pingsyed2 жыл бұрын
@@HAZITECH It will come for All Cars??
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
@smmuelectrician3 жыл бұрын
Supiri thank you
@HAZITECH3 жыл бұрын
Thanks a lot brother
@SithumBinara Жыл бұрын
🥺♥️ supper
@HAZITECH Жыл бұрын
Thanks a lot
@madurdananjaya57053 жыл бұрын
Sir, meakata uparima pixel led keeyak set karana puluwanda?
@HAZITECH3 жыл бұрын
Oyata oona gaanak puluwan. Mama 144 try kala. Ekama de pixel wedi weddi power drop wena nisa strip eke depeththenma 5V power denna. Ampere gaana bulb wedi wena gaana balala denna. Bulb 1000 unath danna puluwan.
@madurdananjaya57053 жыл бұрын
@@HAZITECH Thank you👍
@HAZITECH3 жыл бұрын
You are welcome 🙏🏻
@madurdananjaya57053 жыл бұрын
@@HAZITECH meaka man hadala baluwa wadea hari giya 🔥Thank you👍
@pradeepgurav97116 ай бұрын
I want modern car tail light v1 software coding details
@HAZITECH5 ай бұрын
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
@riza9783 жыл бұрын
Its it working with 24 amps ??
@HAZITECH3 жыл бұрын
You mean 24V right?. If you use a 24V to 5V DC step down converter for power in and change all 22K resistors to 50K, you are good to go.
@riza9783 жыл бұрын
@@HAZITECH okayy , thanks for the explanation man , appreciate it 👍👍
@HAZITECH3 жыл бұрын
Anytime Bagus 🤜🏻
@VimuD3 жыл бұрын
meke pothai CD ekai mta gennagnna puluwnda
@HAZITECH3 жыл бұрын
Sorry mama CD, book sell kranne na
@azor9556 Жыл бұрын
Hi Great project how easy would it be to run the power on animation twice in the code.
@HAZITECH Жыл бұрын
You can simply copy the code in the setup and male a separate pattern function and call it in the loop
@mattlovitt5305 Жыл бұрын
@@HAZITECH Thanks for the tip. Repeated setup in setup and it worked great.
@HAZITECH Жыл бұрын
Awesome 👍🏻
@hankmidun2003 Жыл бұрын
Where i got the coding
@HAZITECH Жыл бұрын
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp +94779299171
@МусаЮсупов-й9х8 ай бұрын
Где купить. Эту ленту
@HAZITECH8 ай бұрын
По вопросам приобретения обращайтесь к нам по электронной почте info.hazitech@gmail.com или через WhatsApp по телефону +94779299171. Ознакомьтесь с отзывами наших клиентов на нашей странице в Facebook, перейдя по ссылке ниже. Мы ценим ваш интерес и благодарим вас за внимание к нашим услугам! facebook.com/HAZI.TECH/reviews
@jasonhernandez62912 жыл бұрын
Is anyone having a issue downloading the file I really like the start animation
@HAZITECH2 жыл бұрын
Try downloading it with a PC not with the mobile phone
@erenvahdetbaysu269110 күн бұрын
can i find ino file ?
@HAZITECH9 күн бұрын
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
@strongheartwsi43111 ай бұрын
Where the code link
@HAZITECH11 ай бұрын
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
@pradeepgurav97116 ай бұрын
Hi
@baranbasaran346811 ай бұрын
Plase code
@HAZITECH11 ай бұрын
For code purchase, contact us at info.hazitech@gmail.com or WhatsApp at +94779299171
@ekia69954 жыл бұрын
👍👍👍😍
@HAZITECH4 жыл бұрын
Thanks 😊
@mitnguyen26442 жыл бұрын
Đẹp đấy ib cho nhết thử s nhé
@HAZITECH2 жыл бұрын
Thử nó. Chúc may mắn
@sharifkhan-en1fe Жыл бұрын
Contact number sir
@HAZITECH Жыл бұрын
May I know your question?
@sharifkhan-en1fe Жыл бұрын
@@HAZITECH thank you for replying back. I am planning to start led taillight and led headlight repairing shop but I am not able to find the smd led chips used in car headlight and taillight. So is there anyway you can help
@HAZITECH Жыл бұрын
Reach out to us for any personalised services or custom job requests - 📧 info.hazitech@gmail.com
@MuthuRamalingamDriverАй бұрын
Sir 2 pcs vanum yappadi order pannanum
@HAZITECHАй бұрын
For purchasing inquiries, please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171