DIY modern terrain build for MCP, Zombicide, walking dead and more

First build for MCP terrain making a 3 story venue to fill a board, add elevation, and dynamics to game play!
Building measurements:
Front angle: 5.5"x7"
Front main: 8"x7"
Front side: 4"x7"
Back: 12"x7"
Back side 8"x7"
Lower windows: 2"x2" centered on side and 1" off bottom
Upper windows: 1"x1" centered on sides and 1.125" from top
Door: 3.25"x2" centered
Follow across social media:
Instagram: pCs4sps3OuGc/?img_index=1
TikTok: www.tiktok.com/@ahboochinana_gaming/video/7203067612463385898
check out related video's by other creaters who inspired this build:
Scenery with Sorastro: kzbin.info/www/bejne/hYjdhWeGqMqdidU
Materials used:
Foam core www.dollargeneral.com/p/readi-board-foam-board-x-white-/82665305256
JTT scenery products-embossed pattern sheet www.micromark.com/Ho-Sheets-Dressed-Stone-2?msclkid=60706521f34518e1f0fe015f9be83d20&NX_NTM_Shopping_Segregated&Building%20Materials
black card stock
Vallejo model paint
Reaper Minis model paint
Craft paint
PVA glue
super glue
hot glue
#miniature #terrain #craft #diy #marvel #zombicide #mcp #marvelcrisisprotocol

[@Belzediel]

Trick from back in the day. Take two knife bits, either two scalpel blades or two fresh but broke off sections of stanley knife (boxcutter iirc) blades and glue them to a piece of whatever material you are building with. In this case, foam core. That twin bladed bit of foamcore will now, when using a steel rule, cut an absolutely perfect strip of paper the precise width of that foam core. Which means you can very, very quickly repaper the exposed foam edges, making it WAY easier to paint black. Also, if the paper you are cutting IS black (or grey or whatever) you won't even need to do that.

[@danlangford9434]

Very nice.

[@AhBoochinanas]

Much appreciated

[@dnomyartrejo2650]

Subscribing now , yes