DIY Motorcycle lift from an old jack, no welding (English version)

[@cosmicdrive8601]

very good build and very well exsplained .A great video for people on a budget .Thank you.

[@goerage]

Thanks for your kind words. Very appreciated!

[@TheOriginalProfG]

I fabricated one with 2x4s, steel hollow bar and angle irons and had to modify it by adding additional bolts (not shown in this video). i had initially planned on using wood as the main frames but decided to use steel along with it to reduce the chunkiness and increase strength, so I used a 12mm Brazilian plywood sheet, cut in half and layered on top of each other to give it more strength (Amost an 1" thick). This gives it good strength and durability. kzbin.info/www/bejne/fGjac6mQisppars. There were quite a few adjustments and changes as I went along. I have now had my 250kg bike on the ramp for 2 days (It is a V-Strom DL1000) and it has held up very well.

[@goerage]

Cool!! Great addition. I'll add the link in the video description, if you don't mind me doing so.

[@TheOriginalProfG]

@@goerage Not at all. Go ahead 😊