The kit from this video can be purchased here: www.garianwrap... If you have any questions, feel free to contact me @garianwraps on instagram or Peyton Tan on Facebook.
Пікірлер: 45
@bimmerfab24 күн бұрын
Have done a few blocks myself and a few for customers. Holding up great!
@GarianWraps24 күн бұрын
Let’s gooo!
@anthonygueorguiev832111 күн бұрын
Would it not have been better if you matched the jacket ports on the head gasket into the epoxy? Or would that take away integrity of the epoxy and make it pointless?
@peytontan52019 күн бұрын
You want the holes as small as you can make them, while retaining sufficient flow to the waterpump. Through our testing, this is the hole size as seen in this video.
@normelioschneiderjunior348616 күн бұрын
How height is the epoxy deck?
@frenchifab86636 ай бұрын
Very nice and indepth video brother🙏🏽🙏🏽
@GarianWraps6 ай бұрын
Thanks Izaiah!
@ZeroTo60Tube6 ай бұрын
Are you shipping internationally by any chance?
@GarianWraps6 ай бұрын
I have multiple customers from Australia. Shipping prices there actually aren't that bad. Been following you guys for a long time, and would love to work with you guys!
@markburkey63713 ай бұрын
I was wanting to send this to you! 😎 Can't wait to see it!
@bailboyy2 ай бұрын
Pls do a video of yourself trying this 🙏🏽You’re a revolutionary at documenting this platform, big thanks from the Wild West of Arizona
@JosephGMarrero5 ай бұрын
Will this work on a n55? Will it be safe for a 600-700HP engine? How long does this last for? Does it crack or break over time?
@GarianWraps5 ай бұрын
Yes it will work the same way on n55. This is a permanent solution.
@markburkey63713 ай бұрын
Cheap insurance for your build although a little overkill if the tune is good
@TankQ50Ай бұрын
I don’t have a n54 let alone inline 6 but I’m interested in closing the deck on my vr30. I understand you may not know of the right amount to provide ofc, but will you? Also this is a universal closed deck ( expoxy ) option right ? Like the process you would go about as displayed in this video you can apply to v8s & v6s ??
@GarianWrapsАй бұрын
Yes. Shoot me a message at (604) 809-7398 and I’ll get you taken care of
@HT2buildsАй бұрын
Hi, do you also send to the netherlands?
@GarianWrapsАй бұрын
Hey yes we do. You can send me an email at garianwraps@gmail.com
@tjmspeedthings32172 ай бұрын
Any updates
@GarianWraps2 ай бұрын
60+ sold. Many engines past 1000 miles. 36+ psi
@aikidokamks6 ай бұрын
Is machining the cylinders after installing the epoxy necessary and is a torque plate necessary while the epoxy dries?
@GarianWraps6 ай бұрын
Wouldn’t be a terrible idea if you had one. It’s non-expanding and non-shrinking, so it won’t be an issue in that aspect. Wouldn’t hurt to throw on a torque plate though, although many machine shops near me don’t even care to use a torque plate when honing the cylinders.
@ethanfolk12572 ай бұрын
How much sugar you putting in before you epoxy?
@GarianWraps2 ай бұрын
Hey Ethan. It depends on if you are wanting to block off the top ports (single turbo), or not (twin turbo). With single turbo, you can go about 1.25” from deck surface, and about 3/4” from deck surface on twin turbo. All about your engines plans and goals :)
@nesmio73786 ай бұрын
What's the epoxy being resold? Or is that a secret?
@GarianWraps6 ай бұрын
This is not a consumer grade product, although I can answer as many questions regarding the technical data as you need. We buy the epoxy in $1400 quantities from our supplier as that is the minimum purchase order.
@nesmio73786 ай бұрын
@@GarianWraps Alright, it's awfully similar to the Chris Boyette Racing product, you use the same supplier or what's going on? Could you please make the MSDS public on the website?
@GarianWraps6 ай бұрын
@@nesmio7378I am unsure what Chris Boyette uses. The issue with his kit, is that it only includes 12oz of epoxy, and the n54 required 36oz of epoxy. We have also noticed that his epoxy is lighter in colour. This could be due to an incorrect mixing quantities. The mix quantities that we use are +- 0.01g precision. The MSDS and instructions will be included in the package.
@nesmio73786 ай бұрын
@@GarianWraps Well the MSDS also contains information that you'd want to know before buying it, which is why I'm interested before placing my order. I tried asking in the chat on the website and despite it saying that someone answers within minutes I got no answer at all for over an hour. Could you somehow share the MSDS tho or are you adamant on only giving it out after purchase? Why? The MSDS is about safety, not something that should be hidden.
@GarianWraps6 ай бұрын
@@nesmio7378 Sorry about the website live chat function. Not sure why the message had not gone through. Please email me at garianwraps@gmail.com and ill be happy to provide you with the safety sheet.
@neilpatel7284 ай бұрын
Just curious, doesn't this effect cooling?
@GarianWraps4 ай бұрын
It does not affect cooling in a substantial matter because the coolant still flows in stock formation though the drilled holes, which align with the head gasket. Similar to the b58 motor.
@mikeruthen62366 ай бұрын
What is the thickness of Epoxy layer?
@GarianWraps6 ай бұрын
0.75-1.5”. In this video, it was 1.5”
@xxjonathan1174 ай бұрын
That block will hold up 1,000whp?
@peytontan52014 ай бұрын
time will tell. Honda guys have brought a similar setup up to 1400whp
@user-br2db8vx5t4 ай бұрын
I didn’t get instructions with mine bro.
@GarianWraps4 ай бұрын
Sorry about this! This must have been a mistake. Please email us at garianwraps@gmail.com so we can get you those instructions asap!
@user-br2db8vx5t4 ай бұрын
I what did it asked a friend
@BulliKid4 ай бұрын
Feedback
@denver14264 ай бұрын
for what? useless
@GarianWraps4 ай бұрын
Do me a favor and look into closed deck systems
@denver14264 ай бұрын
@@GarianWraps epoxy not solid metal part it is useless
@GarianWraps4 ай бұрын
@@denver1426ok buddy 😂
@denver14264 ай бұрын
@@GarianWraps you can stimulate it i SOLIDWORKS studio.