DIY OLED Display Projects with Arduino | Arduino Sensors |

[@jsonslim]

oh man, thanks for the video, and the thumbnail where you're showing the colorful OLED. I've just bought one from Aliexpress because their thumbnail was shoving also colorful picture on the display. So turned out that the display is monochrome and i want to get my money back, but I was lasy to do it. Now bc i wrote this comment - I definitely will do it now XD

[@MikaelAbehsera]

not worth returning, iwould just get the color one and use the mono for another project

[@TJenga]

This was the easiest video to follow on displays I’ve found so far I just need you to make one about setting up menus to activate functions and I’ll be halfway there. Nice work.

[@MikaelAbehsera]

thanks! means a lot, I could do that but until then I hope you enjoy the other stuff

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@TJenga]

@@MikaelAbehsera I don’t know if there is a voltage sensor but that would be cool

[@joshneely5412]

I wish I had all these videos 4 years ago. Great content, and tons of it.

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@silascheeseman4371]

Excellent intro to the OLED display... thanks.

[@MikaelAbehsera]

Glad you like it!

[@RixtronixLAB]

Nicely explained, thanks for sharing :)

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@goindeep7363]

I doubt you check these since this video is years old but I am into modifying cars and I think a custom oled display in the interior of a car would be cool. Is there a way to run this off of a cars power supply and have it boot up when the car turns on ?

[@MikaelAbehsera]

Ofcouse I check comments, and yeah ! Just run it off the 12v accessory line, every car has it located somewhere but if you can tap that line it would be perfect

[@goindeep7363]

@@MikaelAbehsera thanks for the information and timely reply. You got my sub

[@MikaelAbehsera]

@@goindeep7363 my pleasure, if you want we have a discord were we kinda help each other out and show stuff we're working on, I like to see what you do with this, maybe ill do it in my car too

[@goindeep7363]

@@MikaelAbehsera sure man what’s the discord

[@MikaelAbehsera]

shoudl be in the description of the video, let me know if it doesnt work might have to reset it

[@nicolasmagnussen6923]

Okay, these are really cool

[@MikaelAbehsera]

n o u

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@nemonespider]

How can I use a arduino to make RC plane glass cockpit gauge

[@MikaelAbehsera]

arduino and screen to show data, and a bunch of sensors to collect that data, large project but shouldnt be too complicated, can you RC plane handle all the extra weight tho?

[@laynehammer9146]

Hey dude love the video, i am just learning how to use these and this video is a HUGE help, just to let you know in the video you said SCL is A4 and SDA is A5 but its the other way around, keep up the nice videos :) -Also, is there a way to get rid of the adafruit logo in the biginning?

[@MikaelAbehsera]

oh oops, and I think you can but I def dont remember how, you might have to check the adafruit lib for the command

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@venug2617]

Well done 🎉🎉🎉🎉🎉🎉

[@mrbase1]

Hi Mike, can you show how to use an ultrasonic sensor to show water level on an OLED?

[@MikaelAbehsera]

For water level there’s a video on a sensor for that

[@mrbase1]

@@MikaelAbehsera Yea, my request is more for a graphical representation of the water level on the OLED screen. Haven't seen that

[@mlupdate1678]

i ordered OLED display but its not Adafruit brand.. is it okay to use the Adafruit Library?

[@MikaelAbehsera]

yeah mine wasnt adafruit either

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@samisdamn4062]

Make a tutorial of how to code a game/app for oled display

[@MikaelAbehsera]

we can do that!

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@beatlessteve1010]

.I like that...the LCD goes into the garbage but there are still plenty of uses for the LCD, is that a paradox?

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@beatlessteve1010]

@@MikaelAbehsera absolutely...anyone of the many gas sensors...I wanted to build a device that detects the percentage of O2 in the air...also a pollution device that detects maybe CO2

[@MikaelAbehsera]

I gotchu, adding to list

[@TheFreakzeichen]

Good Video dude

[@MikaelAbehsera]

ty!

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@wheresblxckstar]

hey, i have a chinese oled display which has the address of 0x78 0x7A. I ran some codes and the display is not working at all. Im working on an audio spectrum analyzer for my school project.

[@wheresblxckstar]

i ran the example test code for 128x64 i2c it wont work idk if my display is dead or im just dumb

[@MikaelAbehsera]

Would you be ok joining the discord where we can see screenshots and code? Not sure what the problem is but its hard to help over youtubr comments

[@wheresblxckstar]

​@@MikaelAbehsera the display is ok now i just plugged the pins incorrectly. My problem now is the project itself. My analyzer is not working even if i shout on my electret mic.

[@wheresblxckstar]

@@MikaelAbehsera i joined ur discord

[@MikaelAbehsera]

@@wheresblxckstar nice! shoot a message the discord im sure someone can help

[@King_Thenuja]

for some reason my oled screen did not display anything and I righted all the code you showed

[@MikaelAbehsera]

Check the wiring, could be something small you missed

[@King_Thenuja]

@@MikaelAbehsera I figured out that I had an older version of the IDE and it was the problem 😅

[@King_Thenuja]

@@MikaelAbehsera Great video and well explained thnx

[@MikaelAbehsera]

@@King_Thenuja ah! Nice catch

[@luisanctum]

Dope

[@MikaelAbehsera]

no u

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@mvsprabash]

Ok that's cool

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@e.s.2777]

your starting image shows a 7 pin full color display what you explain a 4 pin monochrome display.😒It seems that Adafruit 1306 library do not offer support for full color. I expect an expert provides the lacking information.

[@MikaelAbehsera]

Same code different setup

[@angelica-wn1xn]

How to connect bluetooth to oled?

[@MikaelAbehsera]

bluetooth module/board

[@justlearning8475]

Hi I saw this video and like it. I ask if you can a video on a 2 wire RPM sensor for the Hobbywing sensor. There is one but no " code". The fellow shows the code on his computer and on an angle as well as a bit out of focus, "very useful". This is the link, kzbin.info/www/bejne/eZyapGyfqb5qbMU it may be helpful as you have a lot more knowledge than me. If you can get it to work, you would be the first as far as I know and show with code.

[@MikaelAbehsera]

Hey I think we talked on discord but if I didnt finish helping dm me again

[@johnreed3421]

The background music is annoying If you are listening carefully, so I haven’t subscribed.

[@MikaelAbehsera]

th.bing.com/th/id/R.de0fb6e150b13589ec56a24044aac04c?rik=730%2flWWEOvdk2Q&pid=ImgRaw&r=0

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?

[@stoptheirlies]

Must you have the damn music on while talking?

[@MikaelAbehsera]

yes.

[@beatlessteve1010]

Luckily the music is way down in the mix but i agree on instructional videos, background music is not good...but great video..lol another paradox

[@MikaelAbehsera]

going to bring these back, any sensors you'd like to see videos on ?