DIY Pallet Shelves, Pallet Recycling Idea

[@AndrewKinsey]

I thought I'd seen the most dangerous table saw before, but this truly takes the cake. Holy smokes. This is truly breathtaking.

[@diywithandrew784]

Ahah😂You are not the first who write about it 😄

[@carsonbanasiak2690]

Wont be the last cause here I am comin in to say something about it. Gawdawmn ! All ten fingers still??​@@diywithandrew784

[@pkaspar78]

Same, I think the saw will randomly appear in my nightmares from now on

[@jond3929]

I can't get past step one. I've gently tossed my crowbar towards my pallet but nothing happened...

[@scholas_creative_space]

😂😂😂😂😂😂

[@garretts.2003]

Man where did you find a pallet that heavy duty? I have access to unlimited pallets, but I've never seen one with such thick cuts.

[@diywithandrew784]

Maybe they are not used in your country. I got a bunch of them

[@iAmTheSquidThing]

When I worked on a construction site, someone referred to them as "glass pallets". And said they're especially strong and rigid for transporting panes of glass.

[@lorrainemclay3343]

Terrific ideas. Thanks 👏🌈🇺🇦🌻🇭🇲👏👏

[@justjimbeam]

Couldn’t watch the video because of the Music

[@justinpederson2217]

Womp Womp

[@luciebeauchesne3636]

What a beautiful way you made your shelf and I thank you because I'm going to do this in my shed with wooden pallets... Thank you for this beautiful video

[@diywithandrew784]

Thank you so much!

[@adrianghandtchi1562]

2:15 That’s actually pretty smart. That’s such a great tip

[@sergeydemichev1712]

Very good! 👍

[@diywithandrew784]

Thank you!

[@fitzwater504]

That’s awesome, I had something similar in my mind & that’s why I looked it up first. Thanks for great ideas.

[@richardgrumpyolman4079]

well done

[@diywithandrew784]

Thank you! 👍

[@ritadem8800]

Beautiful 😍 😘

[@diywithandrew784]

Thank you! 😁

[@yari6229]

Killer table saw😁 'n' great guitar 🎸🎸🎸

[@TheNapalmFTW]

This was a good inspiration for me but that table saw made my fingers hurt. Lol. Be careful.

[@soaktinbleech1106]

I don't have a skillsaw handy, do you think a handsaw would work alright?

[@Msleelee9487]

i didn't get the measurments i'm gonna watch again

[@9catlover]

love this. i collect a lot of free pallet wood. will give this a try. it looks so beautiful sanded down

[@diywithandrew784]

Thanks for comment!

[@humor62]

Nice video, no B.S. and right to the point! Thanks!

[@Skycrew993]

Just old worn out bug infested two by fours Wobbly aeak base ''''. That thing is for what ? Could not put it in the garage useless junk

[@wainivanua]

What do you call the brackets(?) you used to hold up the shelves? I don't think we have them in my neck of the woods. Do you have a link to somewhere I can buy them online?

[@Holmansmowing1]

My DIY Levitating Book Shelf Video: kzbin.info/www/bejne/p2TSo4GIfNyNmMU

[@jeyfro]

idk i'm a perfectionist and have ocd for details, there's a few unpolished techniques i'd have to figure out how to modify personally if i went with your design like the joining of the 3 pieces and the metal L brackets. other than that good job.

[@DY-cq3qd]

Unless your cutting is dead on it will be wobbly and it has no cross brace system to rectify this. You are limited by the size of the wood and there is no stacking joins to overcome this. Actually you can buy carcassing wood very cheaply in 7 foot lengths plus so you can have floor to ceiling shelves. Try not to use a jig saw use a mitre saw. Or a mitre box and panel saw. If you used triangular metal brackets at the back you will partially brace it. Think whether you need to attach to a wall - kids - elderly etc.

[@eslyborjas4951]

I would like to try this… excuse my ignorance, but what are those little metals where the screws go to hold up the shelves to the studs?

[@erichepperle5902]

Excellent video! Can you share *what type of screws you are using?* For the most part, I've been using 2 or 3 inch deck screws. I'd like to get these screws you have but I don't know what they are. Thanks

[@avdad2000]

Great video, love your spinning wheel of death!

[@dammit7045]

Well I am so gonna replicate this.... but a shelf for the garage. Just finishing building patio furniture. Lol

[@diywithandrew784]

Good luck for you!

[@vikingqueen9]

Where's your safety guard on the circular saw!!!!! OMG

[@breakingBox]

Muito bom

[@lilithabunni]

that’s so awesome and great instructions!

[@diywithandrew784]

Thank you!! 😃

[@iamthebean940]

Now make one where you make it into a $1000 desk

[@JasonShinks]

Looks great, good job. Now ro find those brackets... they're beauts...

[@sheenascott5405]

Where can i find those cute little brackets you used? I dont have a saw like that but I wanna try this so bad

[@FatanAdilla-m7k]

P

[@nicolasgiant3993]

muy facil y barato hay que hacer

[@meelamiela]

Could I do this with an old bookshelf made from like that wood composite?

[@clara-gr7du]

Olx mkveis usados prateleiras

[@jasonday7155]

Couldn’t watch …..the music so annoying

[@pinkspiltmilk]

Mute it.

[@vladanmisic4510]

Man you just gave me idea

[@totokbudiutomo9789]

👍🏽👍🏽👍🏽

[@1799063]

Show

[@kabirkumar7489]

Thanks you sir for nice vedeo

[@diywithandrew784]

Thank you!

[@zanebokray]

Чувак, де палети береш? )

[@diywithandrew784]

З будівництва залишились

[@DyFy-hy4qf]

❤❤❤❤❤

[@dahalexander]

👌👌👌👌🌹🌹🌹🌹

[@hafzamacie8858]

Woodglut has a lot of plans to choose from.

[@diywithandrew784]

Thank you!

[@Trixtah]

Yeah, a lot of stolen plans from a spinoff of "Ted's Woodworking" BS with a fake guy for the brand. Go to the site and watch your adblocker go berserk with "unsafe" links. Plus the 25 minute advertorial there that repeats the same five sentences over and over, while demonstrating obvious variations in the plan styles - because they're stolen - is just breathtaking in its incompetence. Don't give them your money.

[@1sheilajanae]

Love your channel man! Great work

[@diywithandrew784]

Thank you! 😊

[@andreweverest1297]

Greate Shelf! Good job

[@diywithandrew784]

Thank you! 👍👍

[@D6V6S]

Nice idea, thanks!

[@diywithandrew784]

Thanks for comment!

[@goldman8602]

Hope you don't think you could 😊ever sell that.