DIY Parkside Battery Powered eBike (Max speed up to 40Kmh)

#ErCanEverything #Parkside #GreenPower
💥I finally assembled an eBike for myself and it's a joy to ride with the Parkside batteries
📌DC 36V/48V 350W Brushless Controller: s.click.aliexpress.com/e/_DDh...
📌e-Bike Throttle : s.click.aliexpress.com/e/_Dlr...
📌The wheels and frame were bought at a flea market for €30

[@iggysixx]

When you install those brake pads, put like.. Business card or a 5 cent coin in between on the trailing end (on both sides of the wheel). And THEN tighten them. This will help ensure the brakes don't squeak when you press them

[@sliwa4204]

Great, more power! It's good fun and good work. I'm still on Parkside batteries. The whole world greets you ⚡️👍

[@ErCanEverything]

🙂🤝🤝🤝

[@YeahNoTellTheTruth]

Very nice build, make it look so simple.

[@DjaniAgain]

Awesome project, Great video Brother! Especially liked how you mount the tyres 😂

[@ErCanEverything]

I didn't want to add extra footages but there are still some. I'll leave the car to rest for a bit. 😁😁😁

[@alanbrown7155]

Brilliant.🎉

[@lliambunter]

I don't believe it ! another video without music well done!

[@ErCanEverything]

😅🙂🤝

[@mattiasoversteyns8164]

Why did you connected that blue and black cable togeter and then shrinkwrap it? (min 6.20)

[@adrianelsner4936]

Bardzo dobry pomysł!!! Po co specjalna bateria do roweru skoro można wykorzystać istniejące rozwiązanie które ktoś używa do innych sprzętów.

[@MeocheTCT-oh1bh]

Very nice build, make it look so simple✌✌✌

[@ErCanEverything]

Thank you my Friend🙂🤝🤝🤝

[@madebyparisgr]

Excellent work ✌🏻✌🏻✌🏻✌🏻

[@ErCanEverything]

Thank you my Friend🙂🤝

[@oldboy5000]

your battery contacts will break! I would put an xt90 anti spark in between

[@rbee3936]

Where did the 2 plastic battery holders magically appear from?

[@sustohouse]

good video. Thank you! Range for how many kilometers?

[@ErCanEverything]

Aprox 20-25Km

[@kyazimismet1906]

Браво перфектна работа

[@ErCanEverything]

Благодаря комши🙂🤝

[@plamenyakov2779]

Gute Arbeit 👏 Ich baue nach 💪🏻

[@ErCanEverything]

Thank you my Friend🙂🤝🤝🤝

[@davidfps18]

Cool. Does it handle inclination? How about the range?

[@ErCanEverything]

It maintains approximately 40 km/h on a flat road and 30-35 km/h on a slight incline. I haven't measured yet how far it will go with a single charge, but I'm guessing around 20km.

[@johnedwards315]

does it handle power regen on pedal or doenhill?

[@mehmetlesimba5814]

Hello neighbor. Thank you, it is a very nice work. I wonder what is the brand and model of the 3D printer? Are you satisfied?

[@ErCanEverything]

Thank you my Friend🙂🤝 The 3D printer is Anycubic Cobra. It doesn't print very perfectly, but it works for me.

[@mehmetlesimba5814]

Thankyou 😊

[@toolscarriagesmodellbauand7246]

Gratulation zum Namen deines Channels. Ich denke dass du Deutscher bist. Topp ist auch die Aufrüstung des Rades.

[@ErCanEverything]

Hello and Thank my Friend. I'm a Turk living in Bulgaria and tomorrow coming a new video about this bike with speed improvement🙂🤝

[@nelchan2421]

now is time to make a parkside 20cells battery

[@timiditta70]

you are number 1

[@ErCanEverything]

Thank you my Friend🙂🤝🤝🤝

[@holgerjacobi2454]

Wie hoch war der Preis für die Teile für den Umbau?

[@ErCanEverything]

I had bought the front and rear wheels from a flea market for €20, the controller and throttle cost about €20, new tires, seat and brake pads cost €40 and the frame was given to me by a friend🙂

[@onurody]

I saw that there seemed to be a feature in the center of the front wheel.

[@ErCanEverything]

It has a 3W dynamo🙂

[@FixitEasyDIY]

Watching

[@ErCanEverything]

🙂🤝🤝🤝

[@the-tree-art]

Topp❤

[@nursaitaksu-yt1nr]

👍👍👍👍👍👍

[@kirandeshmukh616]

😊😊😊😊😊

[@beycanali]

🚲🚲🚲🔥🔥🔥🔥🔥

[@kirandeshmukh616]

🎉❤❤❤

[@zenonjakis9959]

where i can find 3d printer file for adapter?

[@ErCanEverything]

Here is the stl file mega.nz/file/aBpSSAYK#mV20c51SZrdv2hFJw4JBs9DvQU55z3CgkFhpHkLaoiQ

[@zenonjakis9959]

@@ErCanEverything thanks

[@YO9DOC]

range?

[@ErCanEverything]

15-20Km

[@kirandeshmukh616]

🤩🤩🤩😍😍🥰💯

[@anonymously241]

Where are you from my friend? 😲

[@ErCanEverything]

Bulgaria👋👋👋

[@BUGIGANGAS]

Well done my friend 😮 be careful with that speed 😅

[@ErCanEverything]

Thank you my Friend🙏🙂🤝 New video coming tomorrow even faster NFS 53 km/h 😂

[@stevearkie5722]

40 mph easy rider .

[@bozpet]

Some time ago i made the same with 8ah parkside batteries, but im using 60v, and a Bafang 750w motor with custom firmware, peak power i can get 1500w.

[@ErCanEverything]

And I thought about adding a third battery to it. I don't know if the module will work with 6-7V above intended🤔

[@bozpet]

@@ErCanEverything I will say it cannot handle 60v...

[@ErCanEverything]

@bozpet Although the maximum voltage of the batteries on a 48V system is 54.6 or 57.6V but as you say, it will not handle 63V

[@rhiantaylor3446]

@@bozpet 3x batteries fully charged will be 63v. (3x5x4.2v). You can open up the controller to check but they will probably use 63v caps which would be the limiting factor - most other parts will be fine if you avoid long term use of full power.

[@bozpet]

@@rhiantaylor3446 Yes i know, i checked that before connecting the fully charged battery ;)

[@battedtomcatnlnl153]

We need a part 2 Make it waterproof. I life in NL so i need that

[@billykulim5202]

why not just buy a frame bycicle bag, most of them are water proof, jut put those batteries and controller in it

[@electroniquepassion]

👍👋❤️👋👍

[@ErCanEverything]

Hello my Friend👋👋👋🙂🤝

[@robfel68]

I'm not sure exectly what I witnessed here. Did he really make the worlds first Parkside Electric bike?

[@ErCanEverything]

😁🙂🤝

[@jakubkrauz8627]

yup. makita made one you can buy

[@62arts]

Pls put fuse

[@rbee3936]

Illegal in the UK as it's not pedal assisted...

[@mirdallke2]

jaki to cudo ma zasięg?

[@ErCanEverything]

Aprox. 20-25Km

[@ladasebesta3200]

Zdravím potřebuji poradit děkuji

[@DamianChirek]

🐌🐌 0:10

[@ErCanEverything]

👍

[@lezbriddon]

Parkside batteries don't have under voltage protection, if you ever overdischarge them they will never charge off the parkside charge again. Buy Aldi/ferrex batteries they are protected. I made a 84v pack from parkside cells but used a jk BMS

[@5LeTT]

Not even the performance 4 or 8 ah?

[@lezbriddon]

@@5LeTT i only have the standard ones I have not ventured into those as I bought a lot of the standard, I literally went into the store and got almost £500 worth in one go, emptied the store lol.

[@ErCanEverything]

I think the controller had undervoltage protection, but I'll check anyway🙂

[@lezbriddon]

@@ErCanEverything yeah I have a bag of some 30 of the boards still that where removed, to start charging the battery must send a handshake saying 'charge' every few seconds, if you deliberately cool or heat the temp sensor the handshake changes and charging stops and you get the red flashing led on the charger. If during charge or discharge a cell goes out of spec then once again the handshake changes and the charging stops, but this error is logged by the chip and it will never send the normal 'ok to charge' handshake again. I have found no way to reset this so from that point the battery is a paperweight unless you charge manually somehow. I do not know and have not checked if in this state the chip still performs a balance function on high cells, if so just connecting 20v would do, I may test that one day, but I'm not hopeful

[@FromMetayou]

Diy then procedes to use a cn cutting machine lol

[@dreamsteam8272]

Parkside batteries do not need to be charged, the devices are broken before you need a second charge!

[@meneersjonnie]

40km/h with rimbrakes😂 good luck with that.

[@titisacha8601]

This not a problem, if brakes have good adjustment. Lot of bicycle for race have rimbrakes, and in mountain speed is more 40 km/h.😊

[@raziel8321]

​​@@titisacha8601 it is a problem, especially in the case of emergency braking. The performance is simply significantly worse, and the vulnerability to wet and dirty conditions is high. You can't compare it with road racing bikes, which are used in highly controlled conditions. But even there, disc brakes have long been established. And the braking performance of a road racing bike is really, really bad compared to a modern mountain bike. You can build DIY bikes like this, but in the end it's still a really bad bike.

[@KnaRRaN1989]

Do the flintstone its all good

[@pcka12]

Disk brakes have far less mechanical advantage than brakes on the rim which are a system which has worked well for decades.

[@stevearkie5722]

Ha ha .

[@wlkmn]

I don't understood about front wheel. I thought it is electric engine

[@ErCanEverything]

This is a 3W dynamo🙂🤝🤝🤝

[@Pushyhog]

hell, go ahead and buy park tool bike stand, your doing good stuff. Or make your own.

[@jkulstad]

I greatly respect your work, but dislike the bike... gonna need disc brakes and quality hardware at those speeds. I know from experience that speed will destroy that frame and every bolt on the bike. I would prefer that you stay safe and continue making great videos! I hope that you did this to show what is possible and then promptly recycle the bike.

[@ErCanEverything]

Thank you my Friend🙏🙂🤝 This was my first and cheapest assembled electric bike. I'll certainly assemble one with a quality and durable frame after some time.

[@Alex-uh1mj]

Oh. The disc brake myth.. tell me more...i design bikes for a living. Do you understand how leverage works?

[@Alex-uh1mj]

​@@ErCanEverythinghe has no idea what hes talking about. Ignore him the frame and brakes are completely adequate for the motor you have fitted

[@jkulstad]

I just want to encourage safety and feel it is worth it to use quality parts. I like his attitude of using an entry level bike to test out ideas.

[@Alex-uh1mj]

​@@jkulstadyou should have replaced the rim when it was worn With rim brakes it's a part that need a replacement when worn

[@user-jn6dy4uu4n]

😂😂😂 Cheap nasty bike and you put toilet paper down to protect the quick shift and brake leavers 😂😂😂😂😂