DIY pendant lamp/lantern (5 petals) - home and room decor - EzyCraft

[@GauravTandanarts]

Beautiful amazing magic in your hand❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️....

[@japiegreyling3088]

TIP for assembly, use sticky tape on the inside folds to keep it together. Also try frosted plastic with LED bulbs (zero or low heat) for a more luminescent effect

[@nitingupta-si8wn]

Frosted Plastic is rigid and not bendable, is it? -Can you kindly tell me if you use the frosted plastic instead of paper? Can you please explain what's the use for the frosted plastic

[@stevengrizwald4196]

Frosted plastic? I would love to know more! That sounds like it would be perfect. Meh.

[@連智偉]

Awesome just awesome 😢😢😢😢❤❤❤❤❤

[@warrior_2024]

GONNA MAKE IT THIS DIWALI ♥️

[@shiromiwijayanthi2826]

Wow gindara 💖💖💖🔥

[@longg6784]

HOW AWESOME IT WASSSSSSSSSSS !!!!!!

[@sheetallotankar3009]

Really loved it !!💖✨

[@dalipsingh6906]

Will you please tell the dimensions of hexagon

[@worriedVan567]

This is really pretty but it must be just as delicate right? Since you haven't used any glue

[@prasenjitbiswas337]

It's awesome 👦👦👦👦👦👦

[@sunejakatkar8158]

woww its really pretty

[@EzyCraft]

Thank you for the comment.

[@cbajwala]

What is the paper size for printing the template? A4?

[@lofi_beats.xbeats]

Wow beta it's too nice

[@MrEtan5]

Hello, first thank you for your videos that are very good ... I have already done some of the work, but this in particular does not work for me, according to the video you have to assemble 5 parts, then continue doing it but you do not specify how to do it so that it is left with the sphere shape, could you help me with this please.

[@vinaykanawade5439]

if I want to increase the length of the hexagon side then should I increase the inside cutting angle?

[@EzyCraft]

Hi there.. sorry can you explain your question?

[@vinaykanawade5439]

I want to make a bigger lantern, so the hexagons I'll be needing will be bigger than that in the template. I'll make the hexagons but how should I make the lines that run inside from the edges?

[@EzyCraft]

It depends on how big your want it to be. You will have to enlarge the whole hexagon with the lines in it. If the hexagon is 1.5X larger, the lines will be 1.5X longer.

[@riya_karekar30]

hii will you please tell me the dimensions of one hexagon in the template.

[@prajaktamadane]

Beautiful and easy👍

[@tejaswinisutar8444]

What is the measurement of hexagon

[@КириллТ-т6ч]

What size are these parts, the file just won't open

[@EzyCraft]

Hey there. The template link works at my end.

[@rajeshgadkari3582]

its so cute, easy n simple.....: ) loved it....

[@EzyCraft]

Thank you rajesh.

[@gaytriwaghchaure9992]

I have 1 question watercolor pad is compulsory

[@shiromiwijayanthi2826]

Super ❤️❤️❤️😍

[@humannnn9612]

Loved it

[@vinayganga33]

It was a very nice and simple project. ..and it's looks so very beautiful.

[@toptenextreme]

Its beautiful ! I am doing this at home!

[@EzyCraft]

Great to have your comment. Good luck with making it.

[@Niranjan_Vlogs_7894]

plz mentions the size of this

[@henrythompson1025]

Please I can't view the template file after downloading it. Can u help me with a better link to download the template I can use please

[@rafaelmachado5894]

Great! Nice tutorial! I made mine for testing and is pretty good!

[@EzyCraft]

That's great. Glad you made it.

[@mahendrapalecha8095]

great and simple. thank you.

[@ambareenkausar6905]

Will the paper burn from the heat of the lamp

[@rosebeauty7703]

Its look's very nice.

[@EzyCraft]

+Rose Beauty Thanks.

[@olahichel8571]

Amazing! And I will make one of these today!!!!! 😁😍

[@EzyCraft]

+Ola Hichel Great. Let us know how you go.

[@suuraksha]

Ola Hichel, what are the measurements, I'm not able to find that part....

[@suuraksha]

Ola Hichel, what are the measurements, I'm not able to find that part....

[@worldwar3158]

Beautifull and easy

[@shraddhasahurkar8208]

beautiful 😊

[@EzyCraft]

Thank you.

[@leelakanthinagisetty]

Hi, just to try I tried to make this with normal a4 paper, and its not holding its shape so i am guessing i have to use watercolor paper but to make it last longer do you have any suggestions? one other its really stuff after half to keep it round and stiff. the bulb you used can give the specification of it.

[@alyssazhu_09]

You just earned another sub ^v^ This looks so complicated but so ez to make, tq for this video! You’re very talented :))

[@nhipham1854]

thank you so much :) i've just finished it. it's awsomes :)))) super pretty

[@EzyCraft]

Glad you made it. Thanks for letting us know.

[@nhipham1854]

I wish I could show u mine ^^

[@EzyCraft]

Thanks. Could you post on EzyCraft88 in facebook? I would be so happy to see it.

[@riyastastytreats3617]

@@nhipham1854 could you please say me measurement?

[@calvinsajin]

u should show the video of joining the petals

[@Simon.D.i.n.g]

nice... but the bulb will easy to burn the paper or not?

[@EzyCraft]

Please use the low energy LED bulb < 10W.

[@Simon.D.i.n.g]

EzyCraft okk...thank you very much..

[@sandunikudaliyanage6554]

Thank you very much...

[@DamirZ]

Very nice lamp, I made one from spoons 👍

[@EzyCraft]

Great. Would you share with us on facebook?

[@jankishiluman1765]

Can you please tell me Total How Many diamond shaped paper we required for lamp?

[@saqibs9764]

It looks more beautiful if you put less bright bulb inside.Awesome

[@aliftaufik3542]

so beaautyfull. ❤love it

[@EzyCraft]

Thank you Alif...

[@susannebouwman6467]

Is it also possible as a lantern in stead of a lamp? Do you have to do anything different? Thanks

[@user-mm6ww7oq7c]

Marvelous

[@nehawadkar9231]

Witch paper you have used

[@shrutichadha1682]

thanks man

[@ModularOrigami1]

😅 😁 😀 😊amazing video 😅 😁 😀 😊

[@samaratganjwe535]

5 units are required to make a 5 petals structure by using 20 units four 5 petals can be made how to assemble that four structure of 5 petals? Please help or more units are required?

[@EzyCraft]

Hi there.. watch the video again and start out exactly what has been done. You will work it out. Let us know :-)

[@nikhilgamer7634]

In which app can download the Temple

[@Enigmaprince]

Wow nicely done! really enjoyed this one :) can u please explain why u attach the water colour behind it at the beginning?

[@aishvaryapujar9460]

They used double-sided tape, they put one side on the print-out and the other side on the watercolour paper

[@FRANCISSCOMUSIC]

Simple, bonita y elegante.

[@raheenkhan8461]

very nice yaar....

[@EzyCraft]

Thank you.

[@dhyononyong3467]

good job.... i like it.

[@andresvalen4364]

hello but what are the measurements of the figures

[@elangopalaniyandi3158]

If I don't get watercolour paper, is it even okay if I use ordinary A4 sheet which we use for printing the template?

[@EzyCraft]

Hi there.. the support from the printing paper will not be as good as the watercolor pad. In other words, the lamp will not look as good and wont last long.

[@elangopalaniyandi3158]

Ok... Thanks for the quick response

[@jorjakelly8317]

does this work with card

[@adventure_620]

Sir Kon sa paper h plz bata Digiye

[@rupalichetia648]

awesome...creative

[@EzyCraft]

Thank you.

[@vilmarfernandes7872]

Muito bom ! Parabéns .

[@RashmiKenya]

In which paper

[@rbrtmota]

beautiful works! congrats, thanks for share :)

[@EzyCraft]

Welcome. Thanks for supporting my channel.

[@malikmohesen4329]

Exquisite design, I need to copy the design so I print

[@EzyCraft]

Thanks malik for the comment.

[@nidhik8561]

very nice

[@EzyCraft]

Thanks.

[@shubhamkumargond9610]

very nice....

[@EzyCraft]

Thank you.

[@legacyid1465]

Great Idea ! what materials do you recommend that can be durable ?

[@EzyCraft]

Water color pad can do.. please view the video for the materials required for this project.

[@andresvalen4364]

@@EzyCraft please I need the measures I don't have a printer

[@satayprakashgangwar1345]

Plz tell the size of template outer lines its urgent

[@EzyCraft]

Outer lines for the hexagon - 7 cm for 6 sides.. 6 cm for the 3 inner lines.

[@arvindetorres7466]

hi.. do you have a tempLate in a bigger size of this??

[@EzyCraft]

Hi there, To create a bigger version, simply enlarge the template by yourself using any graph software.

[@VishalPatel-qg7bm]

very good

[@EzyCraft]

Thanks.

[@manishbane3613]

nice information for diwali kandil

[@EzyCraft]

Great you find it useful.

[@anilgodse4886]

I like it.

[@EzyCraft]

Thank you. Glad you like it.

[@savitameena7389]

You used simple drawing A4 sheet ? Or anything else like butter paper or thin sheet ??

[@EzyCraft]

Please use the sketch/watercolor paper to provide flexibility and rigidity.

[@SANGTAOYTUONG]

ok beautiful

[@Aggtaa]

Looks fantastic! Too bad the final lampshade dimensions are never shown.

[@EzyCraft]

Hi there.. please refer to the video description. It is 21 - 22 cm in diameter.

[@anilkedia99]

EzyCraft .

[@gaytriwaghchaure9992]

We use watercolor pad instead of drawing paper or kardshit

[@love_live666]

how many piece for this craft ? ths

[@EzyCraft]

Hi there, you will need 20 of them.

[@arifrahman6245]

can i use 200 gsm watercolorpad ?

[@EzyCraft]

Hi arif, you may. But the finished product can be a bit wobbly.

[@edoalva48]

Hey, is it just me or the link really don't work? If yes, please fix it. I want to try make this but without template I can't even start...

[@edoalva48]

Nevermind, I could download it finally but via mobile

[@riyagupta9338]

is the water colour pad of A4 size ??

[@EzyCraft]

Hi there, any size that the template can be fitted in. Good luck with making it!

[@nav3sux]

Absolutely Amazing Thanks always ur once are so clear ins and amazing 👍👍👍👍👍👍👍👍👍👍😘 ohh Great work how can I help to deliver more? anyway I can help u? cos the whole world must see this

[@EzyCraft]

+nav3sux So glad to know you like it! It would help me a lot by coming back more often to view any videos interesting to you, and tell people about this channel.

[@RashmiKenya]

Super

[@andresvalen4364]

please I need the measures I don't have a printer

[@TechnoJahanBD]

Nice....

[@rajnandanihaldiya427]

I'm not actually able to download the template. Can I know the dimensions of the shape please 😊

[@rutikaattarde8357]

Ill try

[@rutikaattarde8357]

hi, there are 6 sides of the hexagon shape and each side measures 7 cm. u can say the diameter of the shape for its corners is 14cm. in the between (the 3 line to insert other shape): every line measures 6 centimeter each. and these line measure 90 degree 9(openside) and 30 degree (closed side).

[@otepjbeatlink4291]

can bond paper be used?

[@EzyCraft]

Hi Joseph.. I am afraid the bond paper is too thin for this project.

[@banyuwahyuganesha9481]

I can not download. 😭

[@marcusdenice1557]

where do you get the ac light for the lamp?

[@EzyCraft]

Hi Marzo. You may find the lamp in the hardware or homeware stores. If not, you may find and purchase it online.

[@Abhaycharts25]

hexagon ka size kya hi

[@CellphoneGuru]

nyc work

[@yogeshbodkhe2350]

what is actual length of line in hexagonal

[@EzyCraft]

6 cm.

[@shraddhasahurkar8208]

can u tell me about the proper cutting dimensions

[@technologykiduniya7937]

shraddha sahurkar hii

[@amitpatil8932]

its according to size

[@amitpatil8932]

its according to size

[@amitpatil8932]

its according to size

[@amitpatil8932]

its according to size

[@audiobreeze3308]

How to check it

[@persadaclp]

how to give the color? please reply

[@EzyCraft]

You may use the colored paper. However, try and select colors that are not too deep.

[@palashhalder6009]

l like it

[@EzyCraft]

Thank you.

[@markdomingo1387]

what kInd of paper is this??

[@EzyCraft]

You may use the sketch or watercolor pad that is about 300 gsm.

[@bholanath5563]

Nice

[@bidyuthossain7813]

How can I download this template?

[@bucanaviners2473]

What color of the light you are using? is it white or yellow?

[@EzyCraft]

Hi there.. I used an incandescent light bulb which cast a yellow/orange glow.

[@bucanaviners2473]

great.. Thanks!

[@monsifcoca1931]

abat en crochets

[@ihteshamkhanofficial3184]

wonderful awesome

[@EzyCraft]

Thanks.

[@nileshkumar5803]

Hey, can u plz provide me with the dimensions of the hexagon and the cut to be made on it as I am currently unable to take the print of the template.

[@sanjaykshtri9760]

Make Butterfly lampshade like this.