DIY Portable CO2 Tank for Tires, Air Tools, and Beyond

Welcome to our channel, where we present the ultimate guide on building your very own DIY Portable CO2 Tank for filling tires, operating air tools, and more! In this video, we'll provide step-by-step instructions, tips, and practical uses for this innovative project.
🔧 Why a DIY Portable CO2 Tank? 🔧
Traditional air compressors can be bulky and expensive, but our DIY solution is cost-effective, efficient, and portable! With this CO2 tank, you'll have a reliable and versatile air source at your fingertips, perfect for tire inflation, airbrushing, powering pneumatic tools, and even emergency situations.
⚙️ DIY Instructions ⚙️
We'll walk you through each step of building your own portable CO2 tank, from selecting the right materials to assembling the components. Don't worry if you're new to DIY projects; our easy-to-follow instructions will make it a breeze.
⚙️ Parts Required ⚙️
Co2 Tank:
5lb CO2 Tank Aluminum Cylinder with CGA320 Valve
amzn.to/3OAoPC5
Pressure Regulator:
150 psi High Flow Fixed for CGA320 Valve
amzn.to/3Klwhi3
Fittings:
1/4" NPT Aluminum Air Coupler and Plug Kit, Quick Connect Air Fittings
amzn.to/3Oe5IMQ
Hose:
1/4" x 25' Polyurethane Recoil Air Hose and 1/4" NPT Male Fitting
amzn.to/455OSGW
🚗 Practical Uses: 🚗
Tire Inflation: Say goodbye to long gas station lines and low-pressure tires! Our DIY CO2 tank makes tire inflation a breeze, keeping your vehicles running smoothly and safely.
Air Tools: Power up your favorite air tools like impact wrenches, nail guns, and paint sprayers without the need for electricity or a large compressor. Enjoy the convenience of a mobile workshop wherever you go!
Off-Road Adventures: Planning an off-road adventure? This portable CO2 tank is a must-have for airing down and re-inflating your tires quickly and efficiently, ensuring maximum traction and stability on rugged terrains.
Camping & Outdoor Activities: Make your camping trips more comfortable with an air supply for inflatable mattresses, kayak inflation, and even operating outdoor stoves and grills.
Emergency Preparedness: In times of emergencies or power outages, this CO2 tank can be a reliable backup for various tasks, such as inflating flat tires, powering emergency tools, and much more.
#DIYCO2Tank #PortableAirSupply #AirTools #TireInflation #DIYProjects #OffRoadAdventure #Camping #EmergencyPreparedness #CO2Compressor #AirCompressorAlternative
Please note that some of the links in this video description may be affiliate links. This means that if you click on one of these links and make a purchase, we may earn a small commission at no additional cost to you. We only recommend products and services that we have personally used and trust, and your support through these affiliate links helps us continue to provide valuable content on our channel. Thank you for your support!

[@PowerTankOfficial]

Love to see it. Believe it or not, we are fully supportive of DIY CO2 setups and it's refreshing to see a DIY video from someone who knows about CO2 and some of the precautions you have to take with it. Couple things I want to mention because we have a vested interest in making sure that all CO2 setups, DIY or not, are safe. 1: The hose you use with your CO2 system is important! Because CO2 expands from a high density liquid to a low density vapor, it gets very cold, below freezing. Compressors take low density air and compresses it into high density air, generating heat. SO, a hose made for high temp compressors can freeze up and shatter when used with a CO2 system. Check the temperature and pressure ratings of any hose you use. Because our highest output regulator goes to 400 psi, our hoses are specially made to our unique specs to have a 1200 psi burst pressure at 0 deg C. And we have swivels at both ends which is a nice thing to have. 2: Yes, you can transport a CO2 tank in any orientation, but you want to make sure it is secure in transit. You may be able to find brackets for CO2 fire extinguishers which are compatible with general CO2 tanks but our brackets are lightweight, made here, and are strength tested in off road racing. 3: We suggest using a handle to protect the valve assembly. The plastic ones held on with snap rings are common on 10 lb+ CO2 tanks and are fine for light duty. They're less common on 5 lb tanks since those are most commonly used in kegerators or home aquariums where they're hidden in a cabinet. If your CO2 bottle has a neck that is straight up and down like the one in this video, it is compatible with our heavy-duty billet aluminum handle. We make clamps to fit the three common neck diameters. Metal handles not made by Power Tank are made of brittle cast aluminum and are worse than the plastic handles. 4: Those white gaskets are terrible as are the brass ones that screw into the CGA-320 valve. Ours lock into the regulator nut so they won't fall out, are $1/piece, and we don't even charge shipping. It's the only direct plug I'll put in this comment. powertank.com/products/never-lose-seal-co2-regulator-seal

[@danielgonzales9675]

Nice video man 👍🏻 I built a 20lb awhile back, going to build a 10lb for my 4Runner soon sent this to a buddy so he could build his own

[@ncnuke]

Looking Good Vic!

[@VeoismMusic]

Thank you sir!