DIY Powerglide Build in your Garage

DIY, powerglide build. Now, I'm not a professional transmission builder at all. But powerglides are pretty simple for the most part. Mike got all the parts and pieces to put his back together. He has some good pieces here so this transmission should be just what the doctor ordered for some reliability. The 1.69 planetary will for sure make the car leave a tad softer, which means he can throw more power at it.....lol
__________________________________________________________________________________________
www.TurboJohnRa...
The Drag Racer's Wife sub to her channel: / @thedragracerswife
Hang out with me live every Wednesday night for Tech Talk! Ask questions and share your setups. Join here: / @turbojohnracing
Check out the Jegs Pit Mat here: bit.ly/3Iq9Vc1
The baddest turbo's you can buy: www.forcedindu...
Cam Specialist, turbo needs: www.GetFPP.com
Mod Series Shocks: qa1.net
Torque Converters: www.hughesperfo...

[@andrew_brent]

The engineer who designed the aluminum 2 speed PG was a freaking genius of common sense 💪

[@lbh002]

3:15 parking pawl, pronounced like the man's name Paul. You are welcome.

[@garygates5679]

AWESOME VIDEO JOHN...!!!!! DOUBLE G. HERE...!!!!!

[@BlytheLifeRacing]

Can't get over how simple the transmission are, simple is better in some applications for sure.

[@gregkellow4723]

Assembly tip...go to the office supply store and get yourself some clear plastic folder sleeves. When your putting the piston in the drum, put two sleeves inside the drum. One on the inside (small diameter)and one on the outer side and your piston will slide right in. You will have less chance of cutting the seal than if you use a feeler guage or seal knife.

[@TurboJohnRacing]

Nice, that’s a great idea! Thanks

[@curvs4me]

Sweet tip!

[@slowfox89]

I'll try that next time. I used a wire hoop installer and the feeler gage. Both were stressful but I got it. Thanks brother

[@shawng7902]

Dig that idea. I thought what good is a feeler if you still slice 1 of your rings on it going in.

[@PaulRhodes420]

Clear as mud, I should be able to do a transmission rebuild now! What's the worst that could go wrong!? Hold my beer, I got this!

[@RickB1792]

I rebuilt one of these when I was 20 years old for a 64 stingray I bought cheap. It went smoothly and worked perfectly.

[@DoubleBogeyBaker]

I love when you do this video almost every year!

[@jtcoker2684]

Man I was happy to see this video pop up, although I watch all of your content. Just so happens I just got my 1.58s from sonnax and need to get them installed. They are very proud of the 1.58s by the way! I’ve never been in a power glide but after watching this, I’m gonna give it a try.

[@CottonwoodFarms]

Hi John, Great video, learned allot about the Aluminum powerglide. by the way the parking PAWL is just that, not a parking prawl.

[@kevinlarrick8288]

You are quite the transmission man you’re good I don’t understand why you live down there and you don’t live up here in Ohio we need people up here like Great video very helpful

[@thesquirrelchroniclesakare7808]

Damn John I had no idea you were a transmission man. Nice 💪🔥👍

[@TurboJohnRacing]

I’m not, lol

[@antonmorgan505]

First of all you are one of my favorite youtubers and have been watching you since the beginning...honestly respect the fact that you do such a wide array of your own stuff...that being said, i build race powerglides for a living and so much is wrong here...a transmission, much like an engine, is not a good place to do the old "that's close enough, i think it;ll work" thing. For one your leaving a lot on the table performance wise and secondly with the expensive parts that go in one of these units if not installed properly it will hurt if not kill their lifespan. Respectfully, i hope no one builds their transmission like this.

[@TurboJohnRacing]

I’m always learning! What did we do wrong? What will cause it to fail?

[@baby-sharkgto4902]

Anton, please educate us?

[@antonmorgan505]

@@TurboJohnRacing to tight in reverse, to loose in high, you never showed a gov support(im assuming you installed one), never checked high hub end play, those cases have a ton of variance in servo bore depth and there are specs that differ based on pressures you'll run, there are a few other things but not to give away trade secrets, lol....and you put park pawl spring backwards, lol, although it seemed to work. The thing is, it'll work i'm sure...it's just not gonna be as good as it could be buddy...i'm close in NC, if you ever want me to help you or your program look me up on f-book and i'd be happy to assist

[@larryssnova76]

You can put 2 clutches on top of each other because their splined they won’t spin on each other I have taken the material off of one side of 2 clutches and put them metal to metal to get the right clearance

[@nsboost]

Using your video and two others I built a glide end of 2020 and that thing just keeps on taking a beating. Love these transmissions

[@alfredodirks3537]

John you know 1000x more than I'll ever know but I did work a GM parts counter and sold transmission parts. Its called ( just for anyone interested when they go to order one) a Parking Pawl pronounced like a guys name "Paul". Great video's keep on kicking but buddy!

[@samgoody1278]

Hey TJ, thanks again for going through step by step on building a powerglide. I built my first ever powerglide by your video, all tested well, I went 5.3's in the 1/8th on motor. Thanks again

[@tommycook9620]

Damn good video John and u did a good job going over it very well Thanks 👍

[@baby-sharkgto4902]

Holy shit you even do transmissions?!?! I'm surprised that I'm even surprised. You are a legend, TJ

[@TurboJohnRacing]

I’m a hack, lol

[@NickDigger3000]

He’s our hero. TJ is awesome guy 👍👍

[@jamesvaughtjr4282]

Great video John and you did a awesome job explaining everything!!!

[@Rome3aaro]

Turbo John got so much knowledge 🤌🏾💪🏾💪🏾

[@WalksInThunder]

I like that jig holding the trans

[@abarry48]

Thanks for making this! Super helpful and thanks for the TJ hat! It’s a nice quality hat

[@Six60_Garage]

Very helpful video John. Thanks for taking the time to explain. I’m currently switching over to a PG and was looking for a good walk through video.

[@keysautorepair6038]

Parking paw lol driving me crazy great video John I have had issues with the seal's being old and leaking with kits.

[@jefferybuchan4235]

I was always told to soak the clutches over night to let the saturate, then check your clearances. Just from how I was told to do it, I know everyone has there own preferences. I have not done a glide only th400 th350 and 2004r. One last note I was always told to use loctite 518 on transmissions not silicone. I know splitting hairs.

[@fmerkl]

Nice trans Build John !!

[@BudgetBallinGarage]

Great video John! I plan on building my own powerglide soon and this was much needed information! Thanks! 💯

[@slowfox89]

Nice overview. The last Trans I built was 4l60e for my daily Rado. Used alto reds and kolene steels and full width band kit from summit. Did the upgraded shell, double sprag I think from borg warner, vette servo kit, valve body kit. It works great and hope it stands up to pulling car trailers well. I was just thinking the other day I'd like to try a glide for my car I'm going to race. That's way easier to build than a 60e. Thanks for the video buddy.

[@slowfox89]

I'll be the slow new edge out there. Haha

[@jcnpresser]

Hope y’all didn’t forget that inner seal on the high gear drum. Didn’t see one but you changed clips. I guess we’ll find out.

[@TurboJohnRacing]

Yes, we put it in.

[@marksworkshop54]

Always good videos TJ but the park pawl is in backwards and you should loosen your reverse clutches up some more as it will drag on the clutches being to tight . Also need to tighten up your high gear clutch are they are to loose .

[@samuelarroyo836]

VERY NICE TURBO JOHN GOOD JOB 👌👍🙂▶️👍🙂▶️

[@randalljames1]

on a side note... dry clutches on assy is a bad thing.. good idea to soak the things prior to assy.. this looks pretty dry but going to guess it was dried out a bit for video..

[@danmyers9372]

He did the initial fitting dry but then had Mike go soak the clutches. At least that’s what I heard…

[@TurboJohnRacing]

Yes, they soaked

[@theoldbigmoose]

Only addition, I would have dunked the planetary in the red stuff before I stuffed it in the case.

[@aamerelhouli7125]

Beautiful video keep up the good work

[@ajaychapman2276]

Awesome video john very helpful 👍

[@NoName-yr1jv]

Nice job 👍

[@NickDigger3000]

awesome video TJ 👍👍

[@raw2transportinc363]

I was surprised to see the clutches installed dry I was always told to soak them

[@raw2transportinc363]

My bad commented before you got to the soak

[@tensixtythreevideo]

Thanks for another great video!

[@79tazman]

Parking Pawl it has no R in it LOL!! Anyway 2 spd glides are really simple difficulty goes up the more gears you have in the trans

[@468bbccapri]

What is a parking prowl?

[@claytonhaske]

When is a powerglide more desirable over a turbo 400?

[@jeffyoung2089]

Thanks TJ!

[@donalddooley4737]

Thanks for the education class on trans

[@BoostTrain]

Great video, always great content!

[@rickybailey7123]

Thanks 👍 for the video!!

[@jakedempsey2700]

Great information! Can’t wait to blow up my glide too watch this video and fix it 🤣🤣🤣

[@youngracingengines]

What fluid are you running?

[@dougstringer1097]

What was the torque on the valve body?

[@markpetrosky3128]

Check out precision transmission they make great videos !

[@willyb2412]

I sure would like to have that torque wrench he’s got

[@MartinMcMartin]

Man who races on his own dime needs to be resourceful and learn to do as much as he can himself. 👌

[@cstrong5773]

Pawl.

[@TurboJohnRacing]

😂

[@cstrong5773]

@@TurboJohnRacing You said you were sure someone would correct you. 😂🤣

[@1pimpmuke4life]

thank you

[@shanebarney4240]

Awesome content keep it up

[@joshuajackson8142]

TJ you’re a pretty smart man why are not making more money lol!!!!

[@Anarchy-Is-Liberty]

I soak my clutches before assembly.

[@paulmclovin2279]

Perfect… now let’s do mine 🙂

[@johnrussell2918]

It’s a parking PAWL!! (Sounds like Paul) there is no R!! Lol😂

[@TurboJohnRacing]

My slang (poor grammar) will get you guys all the time, 😂

[@WalksInThunder]

That looks scary and I've been wrenching since 7yrs old.

[@laytonturpin864]

The parking pawl is pronounced like the name “Paul”...

[@TEAMERICA96]

What's next? Well, I always just scrape all the leftover parts into a coffee can (preferably empty) just in case you find you need them to get the car rolling. :-)

[@brianhanel6897]

Come on John a power glide race ready from flexplate to yoke race ready should put a 14,000.00 hole in you're wallet 🤑

[@ckfpv]

👍🏽💯👍🏽

[@Peg_Leg9n]

Parking PAWL pronounced PAUL

[@michaelwynne4346]

Why are Ford guys always downing other manufacturers, they all have their up's and downs, just because the LS makes power and has a long life for little money doesn't mean you have to hate it, no one is stopping you from building a Ford.

[@Stevesbe]

Slip and slid powerglide

[@curvs4me]

The minimum clearance is critical to avoid clutch drag. You have to remember they are wet clutches and the film is what makes it slip like a bearing when it's disengaged. More clearance puts delay in the engagement but it will grab the same until it hits the piston travel limit.