Рет қаралды 21,586
This video is now on my personal channel. Please check it out there: • DIY Predator Mask! (3D...
This is how I made the mask from the Predator movie from 1987. I 3D printed the mask on my CR-10 and used spray paint and acrylics to paint it. I used 3/4" backer rod and plasti dip for the dreadlocks.
=-=-=-=-=-=-=-=-=
STUFF IN THE VIDEO
Model I printed: www.thingivers...
TOOLS/MATERIALS
All of these links are the links I used to get the materials. Please note that they are mostly Amazon.ca links. If you do not live in Canada, some products may not be available. All of these links were active at the time of making this video, but some products may be unavailable in the future.
(Anything without a link can probably be bought from a hardware store, besides the printer itself)
Printer: Creality CR-10
Filament “ERYONE Filament PLA 1.75mm” (in the video I credited Creality PLA, which I have used in the past, but for this project it was sold out so I used ERYONE PLA. Personally, I didn’t notice a difference.)
www.amazon.ca/...
Glue “Mitreapel Instant Adhesive CA 400 (13.5 fl oz.) with Adhesive Activator (1)” www.amazon.ca/...
Epoxy “VViViD Optically Clear 2-Part Epoxy Resin Hard Coating (750g Small Pack)” www.amazon.ca/...
Filler “Bondo Professional Gold Body Repair Kit, Quart, (01313C)” www.amazon.ca/...
Spot Putty “Bondo Glazing and Spot Putty, 2.5oz)”
www.amazon.ca/...
Sandpaper: 80-800 grit
Primer: Filler Primer
Paint: Black Spray Paint, Silver Acrylic Paint, Brown Acrylic Paint, Clear Spray Paint, Gold Spray Paint
Backer Rod “Backer Rod For Gaps and Joints, 3/4-by-20 Feet, Gray”
www.amazon.ca/...
Plasti Dip “Plasti Dip Performix 11203 Black Multi-Purpose Rubber Coating Aerosol-11 Ounce” www.amazon.ca/...
Other Stuff: Hot Glue, Baseball Cap, Old Sunglasses
(can be found at a dollar store)
MUSIC
“Binary Heavens” by Formantx
• Binary Heavens
“Final Frontier” by Janet Jones
• Janet Jones - Final Fr...
“Slow Motion” by Elliptik
• Slow Motion
“Stay Alive” by Giovanni Puocci
• Giovanni Puocci - Stay...